Yamaha Vmax Stuck Float Repair.

Yamaha Vmax Stuck Float Repair.

[@anonymouslegion4928]

Great advice, I went through the stuck float issue today. I saw your video and it worked.👍

[@sjuozhunki]

Glad it worked for you---if you ever have to take the carbs apart file that part of the float down so it won't stick again.

[@delboy01424]

Another way witch can sometimes do the trick is to shut off the fuel and run the bike hard until all the fuel is gone even with the choke on this can sometimes shake the float free as there is nothing to keep it stuck up

[@sjuozhunki]

Yes there is also a drain screw for each float bowl that should be drained before the tapping as that will help free it up also.

[@MM-ne1lk]

This didn't work for me, had to hit it a little harder with a piece of wood and a hammer (very carefully) on top of the carb, also draining the bottom of the carb and spraying some carb cleaner in there and on top finally did the trick. For now at least. Thanks for the video.

[@car5car5]

thanks

[@holeshot1721]

Looks like u need new plug wires your spark is jumping!!!

[@sjuozhunki]

It doesn't have spark plug wires.

[@holeshot1721]

@@sjuozhunki o no whats it run on fairy dust!!

[@sjuozhunki]

@@holeshot1721 Cops---i build and sell the kits for the Vmax---look up Exactrep.

[@holeshot1721]

@@sjuozhunki yeah well stock has the wires!!! Good try!!

[@holeshot1721]

@@sjuozhunki thought i saw a spark and def sounds like it! Good luck getting it worked out!

[@JeffoJonJ]

..If in doubt..give it a clout 😃

[@bladerunner9045]

😁 if it works 👍

[@HEREISMULLEER]

Looks like you just gave it an Italian tune up.. lol