Yamaha Zuma, no start carb clean repair without completely removing the carb.

Today we are working on a no start Zuma. Yamaha Zumas are awesome scooters and need to be saved. here we are partially pulling the carb and showing you that it doesn't have to be a major job to get a dirty carb running again!
If I helped you save some cash, cash app me, I accept tips, thank you!
cash.app/$Tepcocyclerepair
Thank you!
Amazon Affiliate links.
Stihl 4 mix Valve adjustment kit: amzn.to/3M037EM
RMStator Peak voltage adapter amzn.to/3pxsOSJ
2009 Chevy Colorado 3.7 thermostat: amzn.to/3ob2tsR
Mastercool high side socket: amzn.to/3Pg5yDI
Camshaft for this 725 Briggs amzn.to/3R6dkBD
Moog Promaster city front sway bar linkage, for 1 amzn.to/3OJJh0z
Oil filter: amzn.to/3abcuzi
Pneumatic bleeder: amzn.to/3mHjaN6
Oil extractor: amzn.to/3BkMWvc
Tire paste for easy tire install amzn.to/3jvKlZO
My favorite rear tire amzn.to/3AclT5w
My favorite front tire amzn.to/2UhcJUF
My tubliss set up amzn.to/3yaDb13
My favorite screwdriver (pick the longest) amzn.to/3yfP99T

[@number1adventurebound]

I just acquired a 2010 with 185 miles on it. Thanks for this video. Hopefully it will be running soon.

[@Gawernator]

You saved a motorcycle racer some headaches haha thanks!

[@shellylozano1052]

Put tape on air box and crank engine it will start every time! The tape will choke engine and cause suction on pilot jet, Vroom!

[@TepcoCycleRepair]

Unless the pilot jet was clogged like this one was. Great scooters!

[@wahkitng4505]

My Zuma have a lot of smoke come out from tail pipe I already upgraded to 70cc and jet. What could it be

[@virgiljs3337]

What is best place for carbs and parts for the zuma?

[@TepcoCycleRepair]

I like rockymountainatvmc.com for my parts.

[@ChickyRx]

great information thanks

[@CursedCoff1n]

I got the same bike but i had a wet plug issue any advice?

[@jamesdvancleave4405]

What did you do to get fuel in the carb before start up? Do you blow compressed air in the vacuum line?

[@TepcoCycleRepair]

Suction on the pulse line will allow fuel to flow I talk about it at 3:28

[@EmerickGauthier]

Hey man! I juste rebuild my bws 2005 put a new crankshaft, cylinder, piston, oil seals, crankshaft bearings, new bearings in my transmission and the oil is new, the two crank covers are all new I got spark compression oil and gas lines are going to the carb and I juste cleaned it but it won’t start. Do you know what could cause the issue ?

[@TepcoCycleRepair]

Could be a few things. First check compression, this will confirm everything is together properly, then with a new plug in, spray some starter fluid in the intake and see if it starts up. If it doesn't and you have good compression, check your flywheel to be sure the keyway is good so it's sparking on time, then check the reeds to be sure they are sealing then last but not least check the exhaust to be sure it's not clogged.

[@TrevisSpease]

Did you ever get her started?

[@Remps19]

Yamaha bws is a piece of shit bike lol, every time I want to use the piece of garbage it needs a carb clean and Yamaha makes it so you have to take every panel off the junk to get at the junk. 1200$ someone come get it junk.

[@Derekfl19]

😂

[@TepcoCycleRepair]

Just use ethanol free fuel and you'll be good.

[@conradme3712]

Wya I got 500