yard sale dingo go kart repair and ride.

l just wont grow up. • go kart fun with mustie 1 brians video,

[@sixtyfiveford]

It's always amazing how fast 30mph feels when your 4 inches from the ground.

[@Ryan-mg5ve]

I have the same kart but it has an old cast iron engine on it so itl do 65 it feels like your flying a plane

[@WildfoxFabrication]

I have a kart that's 1/2 inch off the ground and you gotta be careful not to hit a pebble and 10mph feels like you just crossed the Atlantic thirty times over.

[@dannyielo]

I have a home made one I made and it was going to fast that the axle broke and the tires fell that it had to be. Repaired for another 3 months :(

[@brettgordon8142]

it's great to get older and wiser but never grow up

[@remiel3315]

I second this!

[@sergioferreira5771]

until the spine kicks in

[@daveb5041]

My spine didn't kick in it kicked out and sideways and diagonal. You would think when they replace your back with titanium it would be better. Although I can say my back is worth more then some peoples cars and even some people houses. I wonder if I can sell it for scrap?

[@garyfisher1503]

Brett Gordon, the trick is to be a grown up, not a groan up!

[@trailerpark187]

I got this exact machine when i was in 4th grade back in 88 or 89. Its still ar my dads house

[@805ROADKING]

I hope his Kid gets a chance to ride it, He was having too much fun!!☺

[@mustie1]

by the time he gets it, tires will be down to the tubes.

[@Masocisa]

805ROADKING hell yeah roadking!

[@tablecrusher]

I had this exact frame, motor, and setup as this go cart when I was young. This brought back a lot of good memories. Glad you were able to get it going.

[@MoosesValley]

Fixing up an old go cart and driving it with friends = all kinds of awesome. :) Hooning round your neighbors yard in it and chewing up his grass = priceless !! :) :)

[@Blazer02LS]

Dingo cart part 2 - Stretching the frame and making a VW engine fit.....

[@muskokamike127]

way back in the day, a buddy of mine put a 400 cc Kawasaki motor into a go kart....with linkage for shifting, I never saw it run but I saw it complete...he told me he could hit 100 mph....

[@chrissmith513]

Cool cart 🤗 Reminds me of Kartway park in Edmonton Alberta Canada 🇨🇦

[@23bobjr]

One of the best channels out here for amateur mechanics/engineers. Mustie1 puts things in a very easy straightforward and friendly way.

[@KartFab]

that kart is a legend. Cant seem to stop modifying mine lol.

[@phoenixarizona8441]

I had a 1993 Manco Dingo Off-road Buggy 8hp Brigg's Stratton 305cc With the Emergency Brake she was a blast I rode it Spring Summer Fall and Winter She went anywhere a Quad could go and places they couldn't go lol

[@poopjeans1135]

Dude, the Dingo is a yard kart. NO suspension, so NO, it's not an off-road buggy, you're full of crap right out of the gate. Second you're not gonna jump a kart with no suspension like you can a quad. That's completely made up nonsense, goes anywhere a quad can. Yeah, and my left toe is made of solid gold.

[@Ajaxaxxess]

I have 3 dingos with the 301 predators. Thet are so much fun. Good to see another one come to life. Thanks for sharing!

[@joshrobinson856]

I have 2. One running one just like the one in this video and another one with a roll cage. That one is in pieces though.

[@travisrogers5263]

Bought my Dingo from OTASCO and rode it into the ground! Love that go cart!

[@guymaudlin4055]

Who said "we gotta grow up?".. too much fun. Keep it up. Love the channel!!!

[@bulwinkle]

Guy Maudlin Growing up is for girls.

[@doogals]

Thank you for the noise alerts! It's nice not waking up the entire house while I watch after hours.

[@cbgreenbay]

The chickens are impressed ! Best entertainment they had in weeks. I don't know what yard / garage sales you go to , but please take me with you next time you go. I would buy fifty karts like that for fifty dollars each. LOL . Checking for sales to hit tomorrow as soon as I finish this post. As always another great video mustie .

[@gabbleredneck6318]

I love finding your old KZbin videos and watching them super inertaning

[@niceguy2171]

Thought Brian was going to take out that little tree, or two, those little carts are just to much fun! Heavier base plate, then a much BIGGER MOTOR! More power=more fun!

[@kenfosdick6869]

Friend had one like it. Replaced the motor with an old snowmobile motor.. It was scary fast. Cool video man!

[@daveb5041]

That was my ultimate dream as a kid. I found out as an adult my father totally could have bought me one but he told us we were poor. In reality he could have bought a few hundred of them for me and all the kids at school. Thats way faster then I thought I thought it was going to like the riding lawn mower they got stuck in mud.

[@bryanhachey]

i just started buying and selling small motor equipment! so glad i found your channel !

[@MRrwmac]

It went to a great home! You had to be smiling from ear to ear! His camera got a little off kilter but was fun to watch. You've got to get him to make you a video of his son's surprise and ride!

[@tertessa]

Looks you guys having a good time. .. Brian makes that thing fly...

[@AP9311]

mustie, awesome vid. quick weld and repair job! even a great ride on that. love it!!!! :) enjoyed this vid so much. can't wait to see next vid you upload! :)

[@twocvbloke]

Fun little thing, reminds me of the ones I got to drive in the mid 90s in Cornwall, except theirs were fitted with a rollcage and wide "supervision seats" for the much younger drivers... :P

[@davidhelmuth7654]

Like I was told when I did my first wield, grinder and paint makes me the wielded I ain't! 😂😂😂 All the same like what your doing. Helps me remember the stuff I sometimes forget!

[@majordisappointment8692]

Cool Dingo needs bigger motor and somebody could use a truck lol thanks for the ride..

[@zx8401ztv]

That just looks like a heap of fun :-D, i can see you both loved that :-D. There is a fault with your weld, gotta plate the unbroken side too LOL :-D.

[@davernon]

Some people have all the fun ! thx for posting

[@16driver16]

That is my favorite kart right there, the manco 285 dingo, with just a predator 212 engine swap(governor removed) I had mine going over 40mph, a jet, intake and header it went 51mph

[@Alilretard1]

*Pretty fast as far as yard sale Dingo"s go. 7/10 would ride again.*

[@steveanderson5888]

Wow that looks like fun keep up the good work!! Kick ass brother at least awesome fun ride

[@cartee72]

Damn it one I haven’t seen yet man you know how to have fun!!!!!

[@barfass]

I hope I don't see a "I am on the couch for a month" video after this! hahaha... I have been wanting one of them for a long time and this have convinced me... I need one!

[@CTmoog]

Looks like fun!!! Man you guys have huge lots up there.

[@dotty1549]

Looks like it will be a whole lot of fun!

[@PhilipHutton]

i had a small dune buggy with a 13hp powerfist engine and a custom made torque converter, it was fast af!!!

[@ianvicedomini2648]

One day I'll have me a go kart... the chickens didn't seem fazed by it either lol

[@donaldpowers5557]

hi mustie, love the videos get it running,

[@welshray1]

That chicken was laughing at you both ;-) lol..

[@creativeexperience6388]

the welder in me shuts my eyes when you start your arc lol

[@richardbaumeister466]

Here is a tip for you. If you take a cut off wheel of the appropriate diameter and mount it under your 3" roloc just by locking the roloc onto its backing plate normally you can create an edge grinding roloc. works best with the 3" roloc.with the rubber backing plate (the most common. It makes the backing plate a little more rigid but it allows edge grinding like you did in the beginning of this video and makes the backing pad last much longer. Great for grinding welds in hard to reach locations

[@codybachman5263]

sweet bug in the garage, and double cab in the back yard! haha

[@robertblaricom]

i have 2 of those Manco Dingo Go Karts both built beyond belief and they both broke in the same exact spot on the motor mount plate. yours is probably the 10th one i have seen broken in that exact spot the exact same way

[@johnholmes6570]

Quality find, those kids will remember it forever.

[@mashmash7877]

have a Dingo in storage had it as a kid hasnt been started in 20 years was allot of fun when it ran

[@PapiDoesIt]

Perfect chance to replace the engine with a V-twin and really go places!

[@TheBrokenLife]

If you're running that thing off-road much at all, you're going to want to add a few more tacks to the belly pan. It took all of one weekend of running around in my buddy's field for both of his Dingo's pans to come loose. Also, as you predicting, he did flip one... 9 stitches in the forehead, no helmet. Dingos were gone 2 weeks later. If you're going to wear a helmet and risk injury may as well ride a quad.

[@ericdrisgula3879]

You read my mind when you said you were going to utilize those predrilled holes in your brace for plug welds , I was about to leave a comment saying you shoulda done so then I heard you say it no more than 30 seconds later lol.

[@steamerdreamer]

Those air sanders Are a must for any toolbox

[@richardwarnock2789]

Hello Mustie what temp did you lower that too just curious I have the same welder that was fun ride now who flipped latter on after the video?! , thanks. : P

[@andrewlast1535]

I had one of these as a kid. They don't take jumps well. Put so ,many miles on that beast.

[@wi11y1960]

Too much fun! Put some Armor All on the tires to make then squeal more.

[@patmurphy389]

i know the feeling!!....glad to see it's up & running!....i'm happy w/riding my lil scooters around the neighborhood...lol...everybody thinks i'm crazy...lol....i can just imagine his kids/grandkids in the house asking him, dad you get to have all the fun, when are you going to let us ride it??....lol

[@tomjohnson9976]

I'm suddenly thinking maybe I need to dig my kid's old kart out from under the barn this spring!

[@elwoodwatson9906]

Too much fun. Guess I now see why you don't electrify the winch. You're helping Brian keep in shape so when he flips that thing he won't get hurt, right? Wishing I was there too!

[@w.maximilliandejohnsonbour725]

Nice...!!!!!. Now I'm dizzy...!!!. Say hello to the chickens.

[@somerandomguy3868]

very similar to the old Honda Odyssey. great video

[@rustyrods8535]

We had one years ago great little cart but has the suspension of a wheelbarrow . Upgraded now to a hammer head twister .

[@Heu26262]

This i a really good channel, love your Videos! Greetings from Germany

[@samknudsen9179]

I would like to give you some help with your welding, since I am a retired boiler/ maker welder, if you are going to weld lets say two flat surfaces together to make the steel longer and depending on the thickness of the steel you can do 1 of 2 things. No1 for thin steel lets say 1/4'', grind a one side of the steel to form a V shape, leaving about an i/8 '' flat face surface, butt both ends use 2 G clamps one piece to clamp to the bench, align the other piece up use 2 G clamps to hold the other piece in place, then tack weld both sides, starting from the 1st tack that you done, weld from the outside in to about 1/2 way, then repeat same from the other side, by doing this method, you will get good welding penetration, no2 using the same two pieces of steel, repeat process as of no, but this time do a butt join, leave up to a 1/16'' gap, increase the amps just a tad to get a good tack then repeat welding process, but if you are doing a running welding repair in place like you done on the home built go cart you repaired for your mate, where the motor mount was, I noticed you removed the paint first to get a good weld, I have done that also on painted steel, I did notice that you just clamped the pieces of the flat bar to get a flat surface, then you tacked the top of it, when you removed the clamp, you tacked the bottom side then you proceeded to weld from the top down, here is a tip, tack the opposite side of the flat bar both top and bottom, using your grinder with the cutting disc, grind a small slot in the opposite side, increase the amps and the wire speed just a tad, starting from the bottom of the flat bar, weld upward using what is called the Christmas tree weld also known a s vertical up welding, to do this type of weld, start the weld off like you are going to do a tack, then do a side to side weld at the same time return to the centre of the weld then move up a tad, continue that process till you get to the opposite end, on the other side of the flat bar, repeat the same process, starting with the grooving out, then weld away, remember to seal off the top and bottom of the flat bar, by doing this sort of welding, there is no need to weld any extra plates for strength, trust me, your welding will improve greatly, Happy welding Sam Knudsen Adelaide, South Australia

[@garypoe4411]

Lol i thought he was laughing but it was the chickens

[@thejavaman53]

That UV ray blinded me.

[@Mark-nu5vg]

Back in the late sixties early seventies my brother and I had a few go-carts the motor to have then were the two stroke McColloughs 101's and 91's man we had so much fun seems like not many people that are younger ever heard of those motors they were designed I think for go-carts.God bless my dad for always taking the time for my brother and myself and making sure we always had fun.Everything about anything on wheels we learned form our dad it was passed down.

[@bradnoyes7955]

9:17 I like your kinetic impulse persuasion, sometimes its the best method

[@timeslick8167]

Holy crap that looks like fun.

[@kevinbyrne4538]

Much more fun than repairing lawn mowers.

[@68air]

Neighbors: It's that guy Mustie again.... You mean you don't have a complete suspension system somewhere in your shed you can add to this?

[@kennybeam2008]

I had one when I was a kid. I think it had a 5 hp Brigs and it was fun.

[@rickfletcher5053]

Love your videos, keep them coming. Did you ever have a video of the double cab VW being finished up?

[@PorkChopExpressBK]

It's a lot quicker than I thought it would be. I think you need to get a Odyssey 350.

[@wheelerdealer7098]

I want this guy for my neighbour.... wicked channel

[@aaronbarnes8938]

I had one of these when I was young got it brand new.

[@Customwinder1]

Pretty cool mate. 👍

[@ceb9203]

Great job mustie ... Now when can we have a go? Lol

[@henkbarnard1553]

I want a turn too!

[@pokolo2011]

Nice video guys How you call that chassis ? Thanks

[@briansouth9325]

Lily is awesome! You should show her more

[@arvidsgills1157]

OMG that angle grinder sound sounded like dentists drill

[@bluzmanintx8176]

U guys act like children......i love it!

[@Parker-ch2yg]

hi love your channel

[@mischef18]

Well that looked like fun.

[@sandiegobenjamin]

Mustie1 just givin her.. bless ya real bad!

[@1967250s]

That was fun!

[@dean6708]

Dude about lost it when he went through his yard. Trying to show off lol

[@nowhereman7398]

In this town, the cops would have broke up that party, long ago. Looks like fun.

[@DrLove911]

What yr did they make these style dingo carts ? I have one what are they worth restored ?

[@steveyulenburg129]

That looks like clucken good times!

[@johnniewalner]

I got this Same cart just chillen with the roll cage still

[@toecutter8002]

Wow looking @ this dingo brings back a lot of memories of the o e I had. My dad bought me one because he got tired of all the other kids having go karts and they were mean and wouldn't share so my dad did a fatherly gesture and got his son a dingo and I remember on Christmas morning I was tearing the roads up and low and behold they wanted to drive it yeah right my dad told me to tell them to kiss my ass. I'm 38 now and I was 15 when I got it. I'm buying my 6 y old son a coleman 100cc and I hope he remembers these moments in life

[@johnkramer7161]

Do you think Brian's kids will be able to get him off of it long enough for them to ride it? lol

[@Gruxxan]

hi mustie, what kind of welder is that? looks very handy

[@clownshooter]

I have same kart that needs a motor,what did you use and where did you get it if I may ask?Great video!

[@CarPhonix]

Look forward to your vids now ugh lol 😂

[@SMKreitzer1968]

Lots of fun!

[@MrRandomposter]

Looks like fun.

[@johnobiro5202]

I bet your friends neighbors love him.

[@benjaminmccarthy1213]

great video keep up the good work

[@garyjohn316]

Your friend has a nice place.

[@MMR45660]

You guys are tempting fate with no helmets I fear. I held my breath when I saw those sharp curves. Stay safe please.

[@josephjakubec9584]

Enough with the helmet already. Stick to driving your car or stay locked up in the house where you won't getf hurt. What a wimp country we are now.oh

[@MMR45660]

Red (blood) is pretty - but gooey!

[@droceretik]

Catastrophizing fun police strike again. The risk is their's and they know the risks. The chances of having a serious accident are probably slim. It's up to individual mature adults such as these guys, to weigh up the risks and benefits. They were having great fun for not much risk IMO.

[@ufomr]

Hi Mustie...you guys were having too much fun...and yes, I was a bit jealous. By the way, have you ever worked on a Rokon? It's a two wheel drive mototractor that can pull a ton...literally. If you havent, maybe you'll get the chance in the future. At least we can hope.

[@newpatek1479]

That back driven pully is on backwards