YeeHung W204 Android 11 12.3" install (Built-in CarPlay android auto)

[@PatricksDIY]

The sad part about this installation, is it was done incorrectly. I am assuming this was the manufacturer that installed it? one part that really stuck out are the GPS and 4G antenna cables are supposed to go through the Middle Hole in the plate, it even has grooves for them to sit in on each side... Terrible Job!

[@pempcar]

Yes, there may be a better way to resolve the location of the GPS antenna in relation to the 4G antenna. Thank you for the suggestion.

[@enovah2151]

Can you explain what you mean by through the middle hole in the plate? Im about to buy this and do it myself

[@ohhstorms4597]

Which one do I need for my 2014 c250 ? Also does it come with the the bracket to hold the screen in ? And harness

[@pempcar]

Dear, i think your 2014 c250 is a NTG 4.5, following product fit your car. www.amazon.com/dp/B0BNPY32GX?ref=myi_title_dp Please note that if your original radio interface does not have the AUX menu, you need to activate it to get the Android sound.

[@brunojugon]

What about the AUX cable?? Where is conected?? Is important conect it??

[@pempcar]

Dear,if your w204 is the ntg4.0, it has the ami interface, you need connect the audio cable to it. if your w204 is a ntg4.5, no aux menu, you need Activate the AUX menu. If you still have problems, please contact our after-sales service team（[e-mail]）. Send them your order number and they will fix it for you in a timely manner.

[@concerts8003]

9:02-9:15.... totally different car. Probably the piece that's not working for me. The original OEM display is not working.

[@pempcar]

Yes, this part is for C-Class W204. Please note that if your car is NTG 4.0, please use the LVDS box with NTG 4.0, otherwise it cannot display OEM display info.

[@ricardomondestin8724]

What happened to the Aux cable?

[@pempcar]

Yes, w204 has the aux in menu, you need connect the aux cable to the car's AUX IN sockets. or use the AMI cable.

[@maddsiloxOG]

I just bought this screen. I cannot get original screen to be displayed and also no sound. Any help is appreciated

[@pempcar]

Don't worry, I'll fix it for you. Please send your purchase order number to our after-sales team: [e-mail]

[@Kay-cs8pm]

Can this work for 2013 C250?

[@pempcar]

Yes, it fit your 2013 NTG4.5 C250.

[@JoeyPettry-d4u]

Where can I buy this

[@pempcar]

www.amazon.com/dp/B09Y84DBQZ?ref=myi_title_dp&th=1

[@higherself2289]

Make one for w203

[@pempcar]

too difficult!

[@Mr48404840]

🤮

[@concerts8003]

9:02-9:15.... totally different car. Probably the piece that's not working for me. The original OEM display is not working.

[@pempcar]

Yes, this bracket only fits W204 2013. OEM display does not show, please check if you have connected the LVDS box?

[@roccoannecchini5819]

Ottimo per istallare Grazie mille

[@TheTeaLounge]

I don’t know which one i should get i have the 2012 Mercedes-Benz C-Class C 300 Luxury 4MATIC AWD C 300 Luxury 4MATIC 4dr Sedan

[@pempcar]

Dear, pls let me know you c300 is a ntg 4.0 or 4.5? You can send me a photo of the original center console to help you confirm. [e-mail]

[@TheTeaLounge]

Does it fit 2012 Mercedes-Benz C-Class C 300 Luxury 4MATIC AWD C 300 Luxury 4MATIC 4dr Sedan

[@pempcar]

Dear, because 2012 was switched from NTG 4.0 to NTG4.5, so I need your center console picture to confirm, please send your car center console picture to our service team: [e-mail]

[@ImVxqzo]

Hello, i've an 2012 C Classe (05/12) which have a AMI connector in the armrest. Where can i go by the screen to the armrest with the Aux cable ?

[@pempcar]

if your 2012 c class is a NTG 4.5, yes, you can connect the AMI cable get the android audio.

[@johanDIYbuilds]

does this support the google assistant ? if I'm driving and I don't want to type adress ?

[@pempcar]

Yes, it support the google assistant. but you need install the app before use.

[@elkurdo10]

I have a c class c180 2011 wich ntg do i have?

[@pempcar]

if your c180 2011 is a ntg 4.0, below link fit your car. www.amazon.com/YEEHUNG-Anti-Glare-12-3-inch-64-2008-2011/dp/B09Y8TS4NS You can determine whether it is NTG 4.0 based on the second picture of the product.

[@richiero0o0]

You don't show connecting the audio? e.g. via Aux or AMI. Presume that to hear anything from Android you have to select the input on the OEM screen? Also, does this work with the original microphone?

[@pempcar]

You don't show connecting the audio? e.g. via Aux or AMI. Reply: If your has the AMI, you must connect to the AMI, if you don't have the AMI, you don't need to connect anywhere. Presume that to hear anything from Android you have to select the input on the OEM screen? Reply: Yes, you must select the AUX menu in the original car interface. Also, does this work with the original microphone? Reply: Sorry, you cannot use the OEM microphone in the Android menu, but you can use the original microphone normally under the original car function.

[@richiero0o0]

@pempcar thanks for the reply. The microphone is surprising as you can intercept its cable just like all the other cables. The original microphone is excellent and is already nicely routed so please consider trying to use it. The small Android module that replaces the Becker nav module can use it so I am sure you can 🙂 On that note, since the satnav module is able to play sound via the standard HU I would imagine it should be possible for an Android unit to use the same mechanism i.e. no need to route the audio via aux/AMI/Bluetooth 🙂

[@pempcar]

@@richiero0o0 Thanks for your advice. If the Android sound is to be input to the original car host, there must be a channel to go in.

[@richiero0o0]

@pempcar indeed and there is one that the OEM removable satnav module (Becker) that is located in a cradle in the glove box uses. This is how the replacement Android module (I think one brand is Carabc) works with the original microphone so if your loom patched into that feed it should be possible. The Carabc module uses Bluetooth for audio but that shouldn't be needed as the Becker module uses an automatic wired input.

[@pempcar]

​@@richiero0o0 I will pay attention to the Becker module you mentioned. We sell NTG 4.5 CarPlay MMI BOX, which uses OEM mic, www.amazon.com/dp/B0CGLLMX24?ref=myi_title_dp

[@gfghsdvgsdvcgdhvfdhv]

Does this work on c200 w204 model 2009 ??

[@pempcar]

i think your 2009 w204 is the ntg 4.0, following product fit your car: www.amazon.com/dp/B09Y8TS4NS?ref=myi_title_dp&th=1

[@essentials4644]

Would this fit a 2014 c220 cdi?

[@pempcar]

Yes, it fit your Mercedes 2014 c220 cdi NTG 4.5.; Please note that after installation, if your original car interface does not have an AUX menu, you must first activate it according to the instructions. Otherwise you can't get android sound.

[@azrzu3085]

U have any link for the product?

[@pempcar]

you can buy this link www.amazon.com/dp/B0BNPY32GX?ref=myi_title_dp

[@rastaricky9584]

How did you manage to fit the host(headunit/radio) back inside with the extra wire harness? Not enough room. Can describe how you fit the harness into such small space?

[@pempcar]

You can place part of the wiring harness on both sides of the OEM host.

[@concerts8003]

@@pempcarcap. No room. Show the video