Рет қаралды 33,693
I picked up this York 100 vise for $10. I cleaned off all the crud, grease, and dirt with some varsol. I used my die grinder and wire wheel attachment to clean off the rust and finally painted and re-greased the whole thing. I made sure to tape off the critical areas to keep them clean. The jaws were pretty gummed up with aluminum but they cleaned up very nicely as well! This vise is sure to last another lifetime!
I only used a couple tools in this video...
Nitrile gloves - amzn.to/2kFq8Bc
Grease: amzn.to/2rhTMPG
Wire brush (die grinder attachment): amzn.to/2JObjGL
Paint Stipper: amzn.to/2Ks19xA
Die Grinder: amzn.to/2GNa7EJ
Metal drift/punch set: amzn.to/2YHSL1U