York Heat Exchanger Replacement

[@ISWGaming]

This video came in clutch. Really saved a huge headache. Today was my first York heat exchanger change out. Would’ve been a nightmare without this video. Thanks so much

[@oldmetalguy4577]

Never been a fan of anything from York. Just my 2c. But, being in Texas, I do enjoy watching you guys do these cold jobs.

[@HughesManHVAC]

I'm not a York fan either, Texas! Never been there but want visit sometime! Thanks for checking out the video man!

[@Ismael72110]

i hate york from inside out..this planet will be a better place without york

[@brentthompson4329]

Nice coat

[@5822huron]

Real work!

[@HughesManHVAC]

@@brentthompson4329 thanks Brent

[@OSheaSpringers]

Thanks for recording. I'm a service tech as well and we change MANY of these York rooftops. Except I've never done only a 2 tube. That would be a dream! We never take all of the panels/screws out through. Oh the dreaded 5/16" screw that hugs the wall. That is single handedly the most difficult part! We reach down with 2 extensions and a slotted driver and pull that screw. Also, a bit of a tip: Grab some sheet metal and insert it down the length of the heat exchanger. Put a bend so it can hook on the top. You won't rip the insulation NEAR as much when pulling it out or putting the new one back in. Cheers!

[@jonmoore3964]

Today were changing a 10 ton York heat exchanger and man I will say these guys make it look easy. Wanted to set the building on fire by the time we were done. They legit built the unit around the heat exchanger

[@HughesManHVAC]

Pain in the ass! Thanks for watching

[@Jason-wc3fh]

Is that the one similar to this but has two burner assemblies and the double inducer blowers? If so, I dread every having to do one of these again. Absolutely ridiculous.

[@daviddesilva4971]

The boss sent me to look at client's York rtu. Tenants were complaining about flakes of aluminum coming out of the diffusers. It was nasty inside the heat exchanger box. Recommended replacement. Thxs for the vids!

[@HughesManHVAC]

Must have been burning funny, thanks for watching David.

[@JDT738126]

Hard working dudes, I love your videos thats one hell of a job and you pretty much could be an expert by the time you do one huh

[@HughesManHVAC]

Thank man!

[@jamescollins8148]

Dude! You made those systems like new!💪🏼👍

[@sambobuffy]

Cold job Ryan...awesome!

[@HughesManHVAC]

Thanks Mom!

[@samuelaranda4597]

Dam ! I’m from California. It doesn’t snow in the Bay Area. You guys are hard core HVAC cat’s.

[@HughesManHVAC]

Thanks Samuel

[@samuelaranda4597]

@Ulster Systems dam! To be honest I rather not it looks painful. Lol . I do have those 125 degrees on the roof. I rather do that for a few days then shovel snow all winter. I’m retiring soon. You young Thunder cats can take over. RV and Harley Davidson driving on the California coast. My grandson is my world

[@Ricoswavaey]

Y’all working in some really cold weather I couldn’t do it😂 I’ll stick to texas haha great job by the way👌🏼👏🏼

[@kenward9968]

Great Job Ryan!

[@HughesManHVAC]

Thanks Ken!

[@ramirezmanuel117]

Happy holidays from chicago. Love the content as always. I love doing heat exchangers. If you can, I'd love if you went more in depth with what you had going over there with your meter on the gas valve. Just got me a pair of the Klein tough meters from my senior tech and I'd like to see what exactly you were metering and what you were looking for. Thanks again for the quality content big dog

[@HughesManHVAC]

Thanks alot for watching!

[@hkhsm359]

Nice job. Thanks for sharing.

[@HughesManHVAC]

Thank you Dragon!

[@mohammadhabab2026]

Excellent video god bless you

[@marcuspriester7990]

Looked like a tough one w all that ratty insulation and rusty screws, nice work giving that old unit some new life..

[@HughesManHVAC]

Thanks

[@robertmonaco5720]

Is the burner plate called the burner plate? We are doing a 15 ton and can not fund a part number for that plate.

[@gregmercil3968]

I’ve only done a couple of heat exchangers since I’ve started in this trade, first one was a Lennox (HUMUNGOUS pain in the ass) package unit, and a Goodman package unit (not nearly as bad as the Lennox but still a pain). I’ve heard of how bad Yorks are though.

[@HughesManHVAC]

Thanks for watching Greg, I just condemned another York today

[@GetReady4LiftOff]

cost? The furnace must come out of hse?

[@gregbowman3598]

Good one brother stay warm

[@HughesManHVAC]

Thanks Greg!

[@keepnitkool9042]

Wow great job I’d hate to work on that unit. No heat calls/ issues are electric heat or reversing valve here in swfl

[@HughesManHVAC]

Nice! Thanks for watching man

[@harrisonhughes5078]

nice job hitting 1000 subscribers dad

[@HughesManHVAC]

Thanks Harrison! Your #1 buddy

[@Ray-wr2wr]

to check/ exam heat exchanger on York RTU 60K BTU it can be done by removing top metal cover ? got a call today it was open limit switch i replace the very dirty filters seems like it fine now , then i checked flames looks life flames are wild ( all over the place , going to come back tommorow examine heat exchanger , i heard York has worst replacements)))) i did 2 carriers couple weeks ago 60k rtu 4 hours job)

[@jasonjohnsonHVAC]

Replacing a 25 ton York Sunline tomorrow. Should be hell in a hand cart. 1996 RTU.

[@HughesManHVAC]

I’m late to the comments, hope it went well

[@jasonjohnsonHVAC]

@HughesMan HVAC it did. Pain to do, but its up and running nicely

[@bobberger918]

I always had warm coverall in van for winter

[@HughesManHVAC]

I have some too, holding out as long as I can! Thanks for watching Bob.

[@maheradous9257]

Good job 👍

[@TheBuddymick]

This video saved my ass today, cheers boys

[@HughesManHVAC]

Awesome, thanks for watching man

[@mikeclark1756]

Great job bro

[@HughesManHVAC]

Thanks Mike!

[@oneswta2n]

Thanks you for the video appreciate it...btw great info

[@HughesManHVAC]

Thanks alot man! I appreciate it!

[@EverythingHVACR]

Well, that was fun! Why couldn't it be a carrier, York's are a pain. Great video!

[@HughesManHVAC]

Thanks man! I'm expecting your channel to blow up soon, I've been enjoying your videos!

[@syedbasheer8210]

Nice job 💭💭🤯

[@HughesManHVAC]

Thank you Syed!

[@QuangVu-sd2yu]

Hi , how to order the parts for that York unit , like flame sensor and igniter

[@bwd111]

That weather would be nice right now at 100 degree removing blower assembly

[@robertnest4934]

Great Job Thank You

[@HughesManHVAC]

Thanks for watching!

[@aperdue100]

Love ur videos! How many screws do you end up with at the end!😂

[@HughesManHVAC]

Thanks Allen! Sometimes more sometimes less! Thanks for watching!

[@clarkgwozdecki6782]

Great video man I’m doing one of these in a week just waiting on the exchanger from the factory. How many hours did this take you?

[@HughesManHVAC]

About 5 hours. Thanks for watching man!

[@clarkgwozdecki6782]

@@HughesManHVAC knocked it out in under 4 hours thanks to you. Did it a little different which made it go a little bit easier. Here’s a video kzbin.info/www/bejne/a2fSn55roLaMrbs

[@reza49363]

Thank you great work

[@jimmyflores5421]

Nice job

[@jeffgrant6914]

Nice repair 👌 video

[@HughesManHVAC]

Thanks Jeff

[@daveg8918]

Hate York heat exchangers. I bring sheet metal and slide on the sides and help reduce that insulation from going to crap

[@HughesManHVAC]

That's a good idea, doing a big york on Monday, may give that a shot and see how it goes. Thanks man!

[@daveg8918]

@@HughesManHVAC no matter what York’s are horrible. They build them to never come apart. I see a York I wanna turn my head and say yes heat exchanger was good lol

[@corymullis]

Without this video me and my coworker would’ve been screwed

[@tonydelgrego2906]

Another informative video

[@HughesManHVAC]

Thanks Tony

[@winkhvac62]

I see that igniter control that Isn’t the original No fan board

[@awxlio8496]

Another reason to hate York!

[@HughesManHVAC]

Appreciate you watching

[@eriktorres9861]

What a nightmare, very difficult to replace a York heat exchanger. if I ever come across one those will be condemned and replace it with a new one not a York piece a crap.

[@RJMaker]

Have I ever mentioned that I hate York?

[@HughesManHVAC]

I assumed everyone hates York...lol

[@publicmail2]

Designed to fail, should be true stainless steel.

[@HughesManHVAC]

Thanks for watching AD

[@GetReady4LiftOff]

No wonder i was told most ppl cant afford hi efficiency furnace. You hsve to replace it, they drag it out if ur hse, whsts thst cost for thst??

[@Brutis-1983]

York’s are some of the worse to change a heat exchanger on.

[@HughesManHVAC]

Indeed Brutus, I've done a lot of them. Got a 20Ton to do on Monday. Thanks for watching!

[@Brutis-1983]

@@HughesManHVAC did a Carrier by myself. It was on the ground. Glad we don’t have much snow but a lot of heat and humidity

[@steveblake8766]

#4 thumbs uP

[@HughesManHVAC]

Thanks Steve!

[@lowtemp]

These York units are horrible. I only change heat exchangers in these units if they are still under warranty. Otherwise I turf the unit.

[@HughesManHVAC]

Nice! Thanks for watching the video.

[@JosephRostkowski]

Yorks are the worst for heat exchanger replacing 😢

[@HughesManHVAC]

Definitely! Thanks for watching

[@hvacir9176]

OH man , those york heat exchangers are the worst

[@HughesManHVAC]

Yeah man, I've gotten use to them. Thanks for watching!

[@IslandbreezeMechanical]

York is the least favorite

[@HughesManHVAC]

Indeed. Thanks for watching

[@Demy26]

York 🙈🤢🤮

[@HughesManHVAC]

Yeah... agreed