You bought a 125cc Chinese ATV! Now What? -Complete Build

[@RADVIX313]

Thats a proper job now. Got one for my younger brother to rip around in our backyard. loved your wiring harness video.

[@epicstudios713]

Thanks to your videos I now have 4 110s every time I got stuck on a problem I just watched a video of yours great job man

[@PraskaBoysGarage]

Love to hear it! Thanks for subscribing, I appreciate the support!

[@royhyre370]

Great job bro! Your videos are definitely helping me get my son's ATA 125 D that I got in a big tote box. I have the same passion for for this hobby as you do so it's pretty cool I found your channel. And I believe the thing your calling a magnifier is actually called a rectifier. Again good job and thanks for the videos!

[@raymondfranco1723]

I just bought a 2015 Tao 110 pit bike that does not run for $50 bucks and after watching this video I have a bright outlook on what’s to come. I’ll keep you posted

[@robertlucas3579]

I bought a non running 125cc has good compression, wiring was twisted together and masking taped together. Went on ebay and bought complete harness kit, everything like you pointed out in this video not one frickin wire would plug onto another. I'd gladly pay somebody to correctly connect all these wires! If you knew someone interested.

[@darthamidala]

Great job Hudson! Boy I wish I had that kind of time in my hands. Fun project!

[@chantelrhine8965]

They're really simple once you get the hang of it thanks to you

[@PraskaBoysGarage]

Yes for sure! Thanks for watching!

[@gregreich690]

Love the videos! I am so impressed with your work. I am struggling with my son’s Tao Tao 125D ATV but these videos give me hope! I think you should get some custom “Praska Boy’s Design” stickers for your finished product!

[@laptopmedic1]

You did a great job resurrecting this quad, one item was not corrected though, the rear axel wheels need to be switch over, left to right side, theses tires are directional.

[@atvfixit4124]

Thank you for the hard work you do, this channel has helped me more than once

[@PraskaBoysGarage]

Happy to hear that! Thanks for watching!

[@turtleislight139]

just picked up my son and our first 110 atv project the wiring is a nightmare just trying to find the right wiring harness but like how informational you was in your video

[@PraskaBoysGarage]

Tdog thunderc*ck Thank you for the support! Next week I’ll be posting a step by step guide for installing a wiring harness. I’m going to go over what to buy, all the components, how to test, and install!

[@jembo1959]

Has to be the best video I have seen on KZbin on stripping down and rebuilding a quad, but most of all they way it was explained on the electrics the rebuild and spray job, if this is not your daily job well you you have great skills to keep you going in your retiring years you are a great mechanic, O by the way the wheels are on the wrong way on the back axle, thank you so much I enjoyed the whole video, and I subscribed to your channel. Cheers from Ireland.

[@PraskaBoysGarage]

Thank you very much! I did notice the wheels were backwards and swapped them out before I ended up selling this one! Unfortunately not my day job, for now it's my hobby shop to keep my kids entertained!

[@bbay1977]

Well worth my sub. Keep up the great work. Now I just have to find me a free one or a old one sitting around cheap for me to rebuild. Thanks for the upload and can't wait to see more.

[@PraskaBoysGarage]

I appreciate the support! Thanks for watching!

[@johnnybell7982]

I like watching videos they really teach me a lot about those chines atv's real educational thankyou

[@PraskaBoysGarage]

Thanks Johnny, glad you enjoy them!

[@Ken-sk4bb]

@@PraskaBoysGarage I like how you enjoy doing these videos. Since i started watching your channel i have been motivated to try a build myself. thanks so much hope we will see more content from this channel.

[@PraskaBoysGarage]

@@Ken-sk4bb Glad to hear that! Thanks for watching!

[@wheeliesquad2197]

This video deserves attention!!

[@PraskaBoysGarage]

Thank you for the support!

[@lonestarangler8407]

Thanks for the vid!! my buddy has an ATV that I believe is exactly like this one. He said its not running and wants me to check it out for him. I'll probably use your vid as a reference guide lol! Thanks again!

[@75jarrett]

Great videos. I recently resurrected a 125cc pit bike I got from the tip for my daughter and just the other day scored a 125cc quad from the same dump. Someone has destroyed the wiring harness but with your vids I'm keen as to sort it. Cheers!

[@PraskaBoysGarage]

That is awesome! Glad I was able to help!

[@ProTechEpoxyFloors]

You are killing me! I want to buy one of these just to rebuild it. I own a screwdriver and a roll of duct tape and no mechanical skills. I should be okay, right?

[@PraskaBoysGarage]

Hey man, you gotta start somewhere! I started with a 49cc pocket bike that was in pieces on my apartment kitchen floor. Be thankful you have a screwdriver I had a butter knife and elmers glue!

[@ProTechEpoxyFloors]

Praska Boy's Garage I wish you were near me. I would buy one of your rebuilds in a minute. Obvious you care. I’m wanting to get a cheap 110 for my grandkids. Do you have a recommendation for a new one? A brand? Thanks.

[@PraskaBoysGarage]

They are all very similar but I would recommend sticking with the most popular which are the 110cc. They have the most available parts and are pretty much universal between brands. The 2 brands that come up the most is Apollo and Coolster. I would stick with one of those, that's my opinion!

[@overbuiltautomotive1299]

yes if you can learn i am self tought and can build any engine but this cram makes sence to me

[@frank1128]

Awesome job man. Picked one of these up for $60 recently and rebuilt it for my daughter. Only thing I had to buy was a $25 harness and I decide to change the engine from the 110 auto that was ticking to a 125 with reverse for $30.

[@PraskaBoysGarage]

Frank Thanks for the support! I don’t think I’ve ever scored a deal that good! $115 bucks to put an ATV back on the road is crazy! Nice job, I’m always looking for those kinda deals! 😉

[@nnoffuture]

Where’d you get a 125 w reverse for $30

[@boosta333agag]

Thank you for going over that wiring segment👍👍🤔 i have a frame im just waiting on a motor

[@PraskaBoysGarage]

If you need a more detailed explanation I also have a "how to" wiring video that goes into it deeper.

[@stropcity1666]

Great vid and info...i have bout 8 of those motors if interested in them...all low compression from what i can tell...i put 212cc on the atv frames and kept the original motors.. few 125cc and 110cc, and a 150 speed motor...have 2 atv 125cc with motor on them i haven't swapped yet. Good bodies and seats... just checking with you cause you helped me out alot with troubleshooting my kids atv...just let me know if interested..almost giving away lol..thanks in advance and have a blessed day

[@austeenimmes3442]

Loved this build. Thank you for the content.

[@PraskaBoysGarage]

Glad you enjoyed it!

[@BigRichEHhthang100]

Hi my friend I have new wiring same as you did but I have no spark motor turn over great. What would you say check next

[@adventurer4188]

Amazing video, I just got one of these. It is not however 125cc, it is 107cc that makes the same horsepower as a 125cc. I measured 5.02hp - 4.8tq on the engine@5200&5400rpm. Top speed 32mph, I will do pre/post video with performance carb, air filter, ngk plug, and 91 octane vs stock w 87. For the record, 91 does much better on these engines regardless.

[@PraskaBoysGarage]

Brad! I need your help! How did you get all those specs? I have been researching small engine dynos both buying and building because I want to be able to build and test performance engines. Can you help me?

[@adventurer4188]

@@PraskaBoysGarage My friends shop has a Dynojet 250ix, out in Oceanside. They shut our county down so I have to wait to get back in there. The torque also is quoted to 6.5NM at 5500rpm, that was actually accurate to the wheels. You can either find one of these dyno’s, or work that number back from nm to tq, tq to hp via rpm. The actual dyno proved only a few hundredths off of calculation, if you know the % of power your upgrades will produce on other similar engines, you can use my dyno as a platform to launch. If your looking for raw big power gains, look no further than changing out the gear ratio. You’ll lose a few ponies up top, but massive tq gains will increase your acceleration and uphill maneuvers. If you screw with compression, bore, port polish and so on, expect to replace the flimsy rod before it snaps. The 107cc is already at the top of its power band and a bit beyond, hence its power matches 125cc specs. Also why it prefers 91 to 87 octane. I’d not toy with this engine too much further than what I’ve already done.

[@rochesterscrap9406]

this video helped me a lot thank`s for taking the time to make it

[@PraskaBoysGarage]

Absolutely! Glad I could help!!

[@puddymerriett6798]

I wish I had your skills.your the best I've seen

[@PraskaBoysGarage]

Thank you very much!

[@brianmoore3659]

Cool stuff, rather enjoyable to watch.

[@madfoxindustrie7748]

great video man! i bought one and im rebuilding it too.

[@PraskaBoysGarage]

Thank you! Good luck on your project!

[@fullthrottletae9937]

Nice video and informative and your right not everyone ca. Afford the high end quads so these will do and I also find and fix these lil Chinese quads and bikes good luck and look forward to the next video...and that was funny when the first pop off of the engine you jumped I've done it a few times myself lol good work tho

[@christopherdixon8644]

Just got me self a 125cc Chinese ATV that needs a chain and sprocket and was wondering what size to buy. Your videos are really good and really helpful.

[@PraskaBoysGarage]

The most common chain size for these is 420. Rear sprocket size will depend on your torque/speed your looking for. If you google go kart gear ratio calculator is will give you links to input your wheel size, drive sprocket and rear sprocket. That will help you determine what tooth to purchase.

[@christopherdixon8644]

@@PraskaBoysGarage thank you very much for your help

[@christopherdixon8644]

@@PraskaBoysGarage cheers for the advice on the sprockets. I have another question, I recently bought a new wiring harness with stator, when I went to fit it yesterday, I noticed that connection to the stator is different from the wiring harness, as in the stator has a connector block and the wiring harness just has bullet connector that you push together. Can you buy a connector block that would just fit on to the bullet connectors, or do you think I should cut the bullet pins of and solder them together.

[@jefferywright4204]

Why remove the neutral indicator switch? Instead, run switched power from the ignition to one of the neutral switch leads. Connect the other lead from the indicator switch to the power lead of the indicator light. The remaining indicator light lead goes to ground. You will use 1 m of wire and several crimp on wire connector ends. If you cannot figure out how to do this, shrink wrap a cap over the ends of the neutral indicator switch leads and zip tie them out of the way. That way the switch will be there to connect the circuit back up and there will not be any dangling wires in the mean time.

[@PraskaBoysGarage]

Jeffery Wright I agree with you 100% However for my videos I want to keep the builds simple. KZbin wiring videos are chaotic and hard to follow! I love the plug and play option and unfortunately that means losing the neutral and reverse light sometimes. You should do a video explaining how you would hook it all up! I’d watch it ;)

[@maximus759]

A 17 INCH bolt for the oil drain? WOW! That's a BIG bolt! ;) Seriously, loved watching the video, I am currently rebuilding a couple of 110's myself that I got for free from a friend. I'll be checking out your other vids and I subscribed.

[@PraskaBoysGarage]

Max Imus AH MAN! I’ve probably watched this video over 50 times in editing and never caught that! 17mm!! Good luck on your rebuilds! Thanks for the sub!

[@davidpayne4084]

I do a lot of these there cheap made but you can turn it into something useable

[@PraskaBoysGarage]

Absolutely, thanks for watching!

[@fernandof6722]

Thank u 4 a great video. All the info i needed to start with my atv mod

[@PraskaBoysGarage]

Absolutely! Good luck on your project!

[@fernandof6722]

@@PraskaBoysGarage thanks

[@Danchack]

You are awesome!!! Great video and content

[@PraskaBoysGarage]

Thanks Dan, I appreciate that!

[@manuelott3729]

Hey BJ, love your videos. Very informative! Hope you will be making more content soon. I have a quick question about the parts list you posted. there is a 2 coil wiring harness and a 6 coil wiring harness. Why did you buy both?

[@jdphotography9009]

Great video I just picked one up and got the wire harness only problem I'm having I hook up all the wires and I get nothing but when I hook it up like you did with the starter and battery and it turned over but not when I hooked all the wiring harness up any ideas what I'm doing wrong ty

[@reazali8741]

You need to make a video stretching a atv man.Really love your videos it helps alot

[@PraskaBoysGarage]

I'm really getting into performance mods recently that might not be a bad idea! Thanks!

[@reazali8741]

@@PraskaBoysGarage nice call my name in the video when you doin it👍👍big fan from Trinidad an Tobago

[@sv21turbo]

The thing you call magnifier is a rectifier 😊👍

[@PraskaBoysGarage]

Noted, thanks!

[@ianpurkis3925]

That engine stand is awesome

[@PraskaBoysGarage]

Best purchase I could have every made!

[@derek2114]

Where did you get it??

[@confuzioni406]

@@PraskaBoysGarage Hey. Could you please provide with a link to the engine stand? Been searching for more than a month. Cant find it. Thanks!

[@jackas1583]

Hey Mr. Genius, the world needs your help. Can you make a video on how to upgrade the stator from 6 coil to 8 coil on POS chi-nah crap machines? I couldn't find one video and would like to know how to convert 6 coil to 8 coil. Mainly for light bar power... Thanks

[@living2learn138]

I'm about to paint my ATV plastics, do I need to use a bond enhancer? I keep on reading that whenever painting over plastic, to do a light sand and then use a bonding enhancer because plastic is non-porous.

[@Mudmowerdiesel]

Amazing video

[@PraskaBoysGarage]

Thank you!

[@stevenbollinger6284]

Great video. Enjoyed watching it.

[@jasonrutherford1722]

hey brother love your channel but the only thing i see that you should be doing is you got that flat screen tv behind you in a lott of shots you should have your logo lit up on that TV so the person just passing threw knows who you are just a little something i thought would be easy to do and help your number of subscribers go up a little bit better if your looking to grow but awesome job on e erything you do a great job hosting and explaning everything keep up the great work !

[@PraskaBoysGarage]

That would have been a good idea! I've swapped it out for a white board. The shop life just wasn't made for a tv!

[@edwardvasquez218]

VERY COOL.

[@PraskaBoysGarage]

Thanks Edward!

[@w7061354]

Admire all your work, the neutral and reverse switch is throwing me off, what does that cable do?, Can i just remove it??

[@somewhereinoklahoma5574]

Very informative video! Thank you

[@PraskaBoysGarage]

You bet! Thanks for watching!!

[@shmikeygang5873]

Nice good work looks like fun!

[@PraskaBoysGarage]

They are a blast! Thanks for watching!

[@Clare.1985]

Hey Praska. I just changed the wiring harness on my son's Taotao 125cc atv following your video as well as some of my own mechanical knowledge. My son's 4 wheeler has the neutral, reverse sensor cable as well as the green and red light up near the handle bar. How would I wire that up using whatever I needed off the old harness? Is that possible? Really hoping you reply. I need your experience. Thanks

[@gpl211212]

holy sh.. that's a ton of work, wow

[@PraskaBoysGarage]

It was for sure! Definitely a fun hobby!

[@benrendell3857]

I love your channel a lot in your videos are interesting I have a 125 at the wiring is messed up my dad and I are trying to fix it I don’t really like Chinese ATVs and more for Polaris

[@PraskaBoysGarage]

Thank you! If you haven't seen it yet I have a complete How To wiring video for the atv. Good luck on your project!

[@joseaguilarte441]

Great video, I wish you would have one like this on a Kawasaki Prairie 360!

[@PraskaBoysGarage]

I'll be honest, I am not much of a Kawasaki fan using we are talking crotch rockets. I prefer Hondas when it comes to small engines.

[@lonestarangler8407]

have you ever had to rebuild one of these motors due to scored piston, rings, or cylinder? I'm only getting about 60psi's on the compression test. I need to check the valves next to see if they are 1) not sitting right, 2) need adjustment. If you did have to but valves, piston or rings... where did you buy them from? TIA!!!!

[@PraskaBoysGarage]

Watch this rebuild I did: kzbin.info/www/bejne/i6jHgYSDd5ilo7s I thought maybe the low compression was from the carbon build up and scoring but really it was from a broken intake valve spring. I buy the top end rebuild kits on eBay. Do you think if I did a step by step for the complete top end rebuild would be beneficial? I've been contemplating that idea for an upcoming video!

[@LineupLegend]

@@PraskaBoysGarage I think this is a great idea. Your videos are a great overview of how to rebuild a tao tao. Very educational. I think it would be a good idea to do a tao tao series. 10-20 min videos on each section of the rebuild in detail especially on how you take everything apart. Great videos! Keep it up!

[@AnthonyHardman]

That was awesome! I've got a chinese ATV that will need some work soon. Not looking forward to it.

[@PraskaBoysGarage]

Come on!! They are a serious love/hate relationship! Believe me I have my days too, but in the end getting to see my kids ride makes it worth it!

[@carlasmith7927]

ykolffys

[@carlasmith7927]

you aredum

[@mikespain8655]

Cheap Chinese 125cc quad sell new for say $900. You sell it used and refurbished for say $500. With initial cost, additional parts, time and labor, there is no real gross profit. Good job though. Step one is to see if the engine has compression and actually runs before going any further.

[@lonestarangler8407]

Silly question... but what Squeeze Bottle do you use for your fuel? I'm starting to work on small motors more and more and getting tired of using a cup to pour gas to check combustion and spilling gas everywhere lol!

[@PraskaBoysGarage]

Ceasar D. I’ll be honest they are not the best but for only $10 bucks on Amazon I’m not going to complain! Amazon ASIN B07QV3PJML

[@GSD88]

Where do you keep finding these? Craigslist, Facebook?

[@joolsfreeman4359]

The item you referred to as the magnyfer is the voltage rectifier/ regulator

[@PraskaBoysGarage]

You're right. I have a complete wiring video where I use the correct verbiage.

[@DustyRandall]

Awesome man.

[@StolsenSmallEngineRepair]

Where’s the best place to find these Chinese ATV’s if I want to start fixing them?

[@SuperDirtyred1]

First Thanks for answering, Engine 119.6cc, 4 stroke Cylinder Arrangement Single Engine Type 152FMI 4 wheeler Go Kart 125cc Chinese It came with a plastic quart of what I assume is break in oil, looks like water and dont understand where it goes ? Thanks

[@PraskaBoysGarage]

Alright now Im not 100% but here is my educated guess: The oil is for motor break in. Add the oil to the first full tank of fuel. That way when it burns it will add an additional layer of protection for the cylinder wall and rings. Mechanics also use this technique when trying to bring back a motor to life that's been sitting for years.

[@SuperDirtyred1]

Thanks again, I finely decided to drain the shipping oil and put Castrol Synthetic Oil in then when I got to the battery it was empty no acid. I think that is what the clear liquid in the see through jug was Battery Acid. Any way after i finely figured out there trick on starting it foot has to be on the break in neutral for it to turn over & and the 125 cc runs like a bat out of hell, am 6 foot and I can even drive it and my son loves it and it's just big enough for me to sit in it teaching him how not to kill himself. None of all that info was in the translated from the Chinese instructions, Anyway pretty good deal for $1,400 ON Ebay Free Shipping The Instructions just really suck. @@PraskaBoysGarage

[@tdclymore]

Back tires need to swap sides. Tread pointing the wrong way.

[@PraskaBoysGarage]

tdclymore Yes, 🤦‍♂️ it’s my number 1 comment from this video! I swapped them before I sold it, I was just in a hurry because this was my very 1st youtube video!

[@brandoncone8827]

I have a 2020 200cc Tao Tao ATV, I'm wanting to upgrade speed and power, any suggestion on where to start and where is the best place to buy parts as I upgrade?

[@PraskaBoysGarage]

Best bang for your buck is to upgrade the carburetor. They sell a 32mm mikuni Chinese knock off on eBay that works great. That and a lithium battery are my go to upgrades if I am keeping them!

[@frankielabojr.5244]

Great job 👍🏻

[@PraskaBoysGarage]

Thank you! I appreciate it!

[@robl.4875]

Great Video. Any chance you know the part number to replace the exhaust? Mine cannot be salvaged. Thanks in advance.

[@PraskaBoysGarage]

I don't know the exact one but if you check out VMC Chinese Parts they have pretty much every exhaust a guy would need.

[@charliethompson8876]

have you ever bought a total wiring harness and had a no spark issue. I've been chasing this no spark issue for 2 days now. any thoughts. thanks

[@jdmboa4693]

dude try to clean the rotor and magneto, could work, maybe it could be some smacked cable

[@PraskaBoysGarage]

Sorry I'm late to this comment. Are you still having issues or did you find out what it was?

[@jdmboa4693]

Praska Boy's Garage dude i have been having these problem and the problem was= ground😁😁

[@carlosgaribay722]

Very inspiring videos! Great job! I went ahead and started a build of a 110 cc but have a hose coming from the rear brake that i have no idea where the other end goes to. Also have both a right and a left brake for front and rear so I dont know which one i should hook up to the wiring harness i have since the harness only has one set. Hope you can help. Thanks and keep it up!

[@PraskaBoysGarage]

If you can send me an email with a few pictures I'd be happy to help! The email is listed on the "about" tab on my KZbin Channel. Thanks!

[@THEGAMER-xc3lb]

good vidio

[@weskirtland6261]

how could i fix the rear allighment on a quad like this one i have a 150 cc kayo storm that rolled and i fixed the wirring harness but the alighment is still messed up

[@hpd6881]

Love the videos. Any idea if that wiring harness works on older Honda ATVs with pull start?

[@PraskaBoysGarage]

Thank you! This harness is set up with a specific stator the fits inside the flywheel case cover. I would not work for the older Hondas. You might get away with a mid 90s- early 2000s Honda dirt bikes and using the chinese dirt bike harness, but that's about it.

[@edcosta8417]

Love the channel. I'm working on a Tao Tao 110cc. The body isn't worth saving. Do you know where I could get a replacement body for a decent price?

[@PraskaBoysGarage]

Thanks Ed! The only place I've purchased new plastics from is VMC Chinese parts. I look on Facebook market place for a to find a parts ATV first, but if nothing is available then I buy them new.

[@eMpire705]

Love your videos but i never see you adjust the carb.. is it good out of the box? or actually show the process of what needs to come off to remove the engine. maybe in the future?

[@PraskaBoysGarage]

Yes, that has actually been highly recommended for a future video. I will do one for sure! Brand new carbs are about 90% ready to go. You may need to adjust the fuel/air screw at idle and the idle screw. Otherwise there are usually plug and play.

[@memphisrains1008]

I buy these all the time...cheepest was £20 dearest was £60.i paint every 1 matt black...tao-tao.they are simple to build..i prefer the Kazooma quads.

[@PraskaBoysGarage]

Nice! I love the flat black look for sure! Try using bed liner, that stuff looks great and makes painting super easy!

[@memphisrains1008]

@@PraskaBoysGarage thank you...i di the same as you..buy rebuild and sell on...im known in scotland as matt black mac 😂i have buyers on the phone asking for any other colour..its normally a no.😂

[@busssintb5922]

so should i just match the wires by color if theres no wiring diagram?

[@Devo1987]

I have a 2013 TAOTAO ATA 110-A So there has to be a brake light bulb or wires touching one another to complete the circuit to be able to start ?

[@PraskaBoysGarage]

Yes it is a safety built into these machines to start. You can check out my wiring video if you want, should be able to help you out!

[@kyleherber3231]

great videos and glad someone is making them. I see most of your videos are currently chinese made wheelers, in your opinion are they worth buying for kids? i'm thinking about getting one for my 8yr. old

[@TheGreatBeard]

It's better to buy an old used Honda, but some of those Chinese atv's are good enough and I'm sure any 8 year old will love it

[@PraskaBoysGarage]

If it's the first atv for the kids I would start with a Chinese brand, but buy it brand new. I've seen so many parents buy name brand or chinese brand and the kids don't ride them and they just sit in the garage. I've fixed everything so they all break regardless of brand, but I've learned it's all about the rider and how it's taken care of. As the kids show they want to ride more then I would look into buying a new or used name brand atv.

[@kyleherber3231]

@@PraskaBoysGarage that is great advice thank you!

[@raymondfranco1723]

When I bench tested my starter with my generator it spun but after installing and jumping with my generator nothing is happening puzzled here what to do next

[@jrich565]

I have 2 125cc Tao brand quads that I’m getting ready to rebuild. One was running but now I can’t get it to fire even with a new carb and the other is shooting sparks in between the head and the cylinder

[@PraskaBoysGarage]

Shooting sparks means you likely have a ground issue or a bad coil! Hey at least you have spark, that's half the battle!

[@danielbelanger3078]

Maybe you might want to use an above camera Dano

[@PraskaBoysGarage]

Will do, thanks!

[@pappynotpapi2070]

I’ve watched this video more time then needed lol, every time I have a question I always mean to come to the comment section but I get dragged back into the video then forget it by the time it’s over, well not today. The question is, the neutral/ park thing you took off behind the cover, does the new wiring harness come with the wires to attach it?

[@PraskaBoysGarage]

No it does not. The wiring harness is generic and does not have the plug for it. I have a "how to" wiring video that goes into detail on the install process!

[@pappynotpapi2070]

Praska Boy's Garage okay. Appreciate the reply.

[@cybertronianexchange595]

One more question, What paint stripper do you use that it is not damaging the plastic body panels? Mine is in pretty good condition with minor cracks on the front and would like to salvage it but I am afraid the paint strippers I have would melt the plastic.

[@PraskaBoysGarage]

Klean-Strip Interior/Exterior Paint Stripper Is what I use. I get it from my local hardware store.

[@mo8605]

I seen the battery has the vmc logo on it. Do you order most of the chinese atv parts from there? If not, who do you suggest?

[@PraskaBoysGarage]

Yes, VMC is one of my top places to order parts from. They have excellent customer service, they ship parts to my house in 2 days, and they are competitive with pricing. If they dont have what I am looking for I will use eBay or amazon.

[@mo8605]

Praska Boy's Garage how do you determine some of your parts? I have a 125cc i picked up from someone, but it doesnt state the brand. I ran the vin on a random site, but that was no help. I need to find which key switch fits mine and im having problems seeing which 2 parts go together for the back rack as I currently dont have one on there to go by.

[@ashleysherman4645]

We bought 4 of these 2 months ago brand new. We have had mechanical issues since day one. My father has just got my sons running again and test drove it and it looks like it locked up and came to a sudden stop. There's no skid marks or body damage. No one could tell what happened. Hes in a coma from it. Is it possible for these to lock up and come to a sudden complete stop?

[@PraskaBoysGarage]

Sorry to hear that happened. I personally haven't experienced anything like that before. It is possible that something could have failed to lock it up, but I have have to look it over to figure out the failure point.

[@johnnybell7982]

My friend has taotao 150 atv he not getting any fire to plug i took the coil and put on mine and works so do you think it could be the stater or cdi box

[@PraskaBoysGarage]

The CDI box goes bad on these all the time. I would stay it is more likely the CDI or a bad connection. The stators usually dont go bad, the wire does however get caught in the flywheel and break. I would inspect the stator and replace the CDI.

[@brianb5779]

Any advice on finding a correct schematic for tao tao ys110, i have had a heck of a time finding information for this thing.

[@PraskaBoysGarage]

Are you looking for wiring schematics? I can send you a diagram, just shoot me an email to [e-mail]

[@djfrye649]

Im trying to get my daughters 110 back going, Im having problems finding the right harness. I seen you listed the ebay item number for the wiring harness but that number doesnt pull up any query. If you could point me in the right direction would be much appreciated. Also what color are the wires usually that you always hold together for the brake?

[@PraskaBoysGarage]

Check out my wiring video! kzbin.info/www/bejne/jpWvfZ16j5Zoa68

[@djfrye649]

@@PraskaBoysGarage I found the harness that you order. Ordered and installed specifically to the instructions in your wiring video.....still no spark. Im starting to think this thing is cursed lol.

[@edcosta8417]

Where did you get that paint stripper from? I need to repaint my sons 4wheeler body.

[@PraskaBoysGarage]

I used Klean-Strip Aerosol TO strip the paint and you can purchase from a local home store like Home Depot. Here is a link: www.homedepot.com/p/Klean-Strip-16-oz-Premium-Stripper-Aerosol-CA-Formula-EKPS302SC/311799645

[@Hendogg28]

If you don’t mind me asking.. Where did you get that engine stand at? I like that. And work on these quiet often and that would be a grate addition to my little Atv shop.

[@PraskaBoysGarage]

I actually had a CNC company laser cut out all the metal to start making and selling my own. I will be selling the kits on my website either as a DIY kit or a completely assembled and power coated. Should have everything ready soon and will post updates on the channel.

[@Hendogg28]

@@PraskaBoysGarage O ok. I have soon one like it before is why I asked. Figured it was just something bought... But anyways what do you think they will run? And maybe one with a bigger arm where someone could put a bigger engine in it.. Depending on price I would be interested in one of them.. Thanks..

[@Hendogg28]

@@PraskaBoysGarage Anther quick question for ya. What brand is that leak down tester that you have? I’ve looked at several of them on eBay & amazon but there kind of vague on which adapter to come with.. An I work on a lot of China bikes.. Thanks for you help..

[@PraskaBoysGarage]

@@Hendogg28 If you look at one of my more recent videos like the "How To" rebuild a Chinese motor I have links to all the tools I use in the description.

[@derek2114]

Hey there!! Did you custom make your engine stand or can you buy that somewhere? Love your videos btw.

[@PraskaBoysGarage]

Thanks!!! My engine stand is my #1 comment across the channel! I came across the stand on eBay back in January 2018. The seller was bomcbe2kz7 If I remember correctly, I paid about $110 with shipping. It has 3 mounting plates for different types of small engines. Definitely money well spent for my shop!

[@joecruz196]

Where could I find that motor stand? And approximate cost. Thanks. Great tube.

[@PraskaBoysGarage]

I purchased the stand off eBay a few years ago now. The seller is hot and cold for posting them but I know he makes them. The stand gets so much attention on my channel so I think it's time I look into making them for myself! I paid around $120 plus shipping I believe.

[@davesi99]

Love your builds! Did you make that work bench where you put the quads on? I need a work bench like that so if you could give me some details please let me know. TY

[@PraskaBoysGarage]

Thanks man and I appreciate you subscribing to the channel! The table is actually a 4'x8' display table from a closing Kmart I purchased for $50 dollars a few years ago. It's very similar to pallet racking you can purchase. I love everything about the table other than it's not height adjustable.

[@davesi99]

@@PraskaBoysGarage I thought it would be similar to a pallet rack. Thank you sir and look forward to watching more of your videos. 👍

[@MikeJaws]

Great vids BJ! I have to ask, what motor bracket are you using to when you test the motors on your bench? That is certainly handy! Also, what are you using for your table (and what size) where you put the atv’s up to work on them? I just got a used 110cc, ordered the harness, etc. and looking to tool up to do it again. Any info would be appreciated, thanks!

[@PraskaBoysGarage]

It's probably the most popular tool I have on the channel. I got the stand off eBay back in 2018, but the seller is hit and miss when he lists them. I am currently working with a guy who owns a CNC machine to start making them myself! The table is a display table I bought from a closing Kmart for $50 bucks. It is 4'x8' and works perfect, only complaint is that I can't adjust the height.

[@MikeJaws]

Thanks for the quick reply BJ. I was able to locate the mount on eBay but they want like $109 +shipping, i think i’ll try to wait for the Praska Boy’s Garage official mount LoL. One more quick question, i installed a completely new harness, i have spark, and tried the “finger blow off” compression test, and that seems fine. I try to start the engine but it wont turn over, the starter seems fine. I sprayed starter fluid in the spark plug hole, tried to start it, no dice. Same for the intake side, removed the carb, same thing. Engine oil is new. I ordered a compression tester to make sure i have good compression, waiting for that to come in. is that the correct next step or should i look for something else? As always any help would be appreciated. Thanks!

[@kieshriesh5223]

Great video bro,, hey I didn't the exact same process but I still get no spark.

[@PraskaBoysGarage]

Hey man, did you get my comment before KZbin took it down?

[@rerabovenzi1]

I just put a new motor in mine and now I'm getting a hot negative wire when I try to start it 😢

[@nicohovse4204]

Nice job. Question.. where did you get the motor stand you put the motor on to work on it?

[@PraskaBoysGarage]

Hey thank you very much! This is my #1 question for sure! I actually had a CNC company laser cut out all the metal to start making and selling my own. I will be selling the kits on my website either as a DIY kit or a completely assembled and power coated. Should have everything ready soon and will post updates on the channel.

[@nicohovse4204]

@@PraskaBoysGarage Yussss! Just found your Channel... love the content.. Subbed for sure. Much thanks!

[@PraskaBoysGarage]

@@nicohovse4204 That's great, thank you!

[@youi511]

Hey, great video, watched 3 of your ATV builds. I have a 110cc ATV in Australia that I'm trying to fix up. The last owner swapped a 125cc into it, so there's no electric start. I'm thinking of buying a 110cc with a starter and swapping that in, since I don't want to kick start the bike every time, sound like a good idea? Anyways, thanks again, keep up the great content.

[@PraskaBoysGarage]

Australia?!? That's awesome! Yes the 110cc motors have the lowest prices online. It should directly bolt in so it should be an easy swap. Thanks for watching the videos and good luck on your project!

[@jimrobison1749]

Just wondering how to figure out what size chain to get? The project I got didn't come with a chain, and looks almost identical to the one you did here.

[@PraskaBoysGarage]

My best guess is its probably a 420 chain or a 428. Chain is super cheap online so I typically keep about 10' of most of the sizes to make sure I have the right kind for my projects.

[@jimrobison1749]

@@PraskaBoysGarage Great thanks for getting back love the videos. I was thinking 420 as I looked more into types for sale.

[@PraskaBoysGarage]

@@jimrobison1749 You bet! Good luck on your project!

[@mig6910]

I need help shopping for a used cheap quad I’ll fix it I just don’t know where I check Facebook and never find someone selling em what app do u use and where

[@PraskaBoysGarage]

Facebook Market place is my go to! Craigslist is basically over and I've tired apps like LetGo but nothing seems to work as good as Facebook. Every video I've done on KZbin started as a purchase from Facebook.

[@centailbell3945]

Do u need both harness for job