Can I fix a 125cc Chinese ATV with nothing but PROLEMS!?!

This project has a quote to live by: "When everything seems to be going against you, remember that the airplane takes off against the wind, not with it." Henry Ford
I call projects like these "growth opportunities" and wouldn't have it any other way! Thanks for watching!
Wiring a Chinese ATV from start to finish with an All New Wiring Harness!
• Wiring a Chinese ATV f...
HOW TO: Complete Tear Down & Rebuild of a Chinese ATV Engine Head. Every step you'll need covered!
• HOW TO: Complete Tear ...
Music provided by “NEFFEX music” under creative commons license as shown at the original channel and under each video’s description.Url: kzbin.info/door/Bef...

[@PreacherDan]

Dude come back to the table.

[@pappynotpapi2070]

I Miss this guys videos, I hope he plans to come back😢.

[@derrickrepko1670]

Where you at bro? It's been 8 months an nothing new. Hope all is well! I just found your channel today an watched some of your videos an love the content an how you present your videos! Hope to see new videos!

[@Exocet-ep2mk]

Yeah, I like his channel, but he seems to be not making new content. Hope nothing bad happened to the dude?

[@MikeJaws]

Hey BJ, great vid as always my man. A carb video would be great! Showing what size carb to use on what cc Chinese engine, the differences between PZ19 vs 20, etc. and how/when to service a carb would make for some good content! Just my 2 cents, for what its worth 😎. Great to have you back.

[@logan0377]

We need you to come back man

[@SilverBulletNation]

We miss your videos man! Hope all is well.

[@williamirwin6205]

Full carb clean video would be amazing. Love your videos man. Huge fan of your channel

[@jtveg]

Yes agreed, especially if there are adjustments other than just the idle screw.

[@joshuageorge7758]

You can order them for $20 already pre adjusted, comes with new air filter, fuel filter, and some even come with new spark plugs.

[@jtveg]

@@joshuageorge7758 Thanks for the information.

[@alsouthern7190]

Man, "WELCOME BACK!!" Been waiting for you to start posting videos again and yes a carb cleaning video would be great or anything. Glad your back is doing good since surgery so keep those great vids coming!

[@anuarmartinez8947]

excellent video, can you do one about chinese atv wheel alignment, please?

[@sonmorales3844]

I was just given one of these. Watching ur video. Kinda gives me place to start

[@kar21ol96]

A carb video would be pretty helpful. I’m trying to get my first ever atv running after about 5 years. Thanks!

[@jeepinwithjim9894]

BJ's videos helped me completely rebuild a free, off the side of the road, non running 110cc Coolster ATV for my grandson. The video on the wiring was very useful. Good luck.

[@kar21ol96]

@@jeepinwithjim9894 thanks! I know how to rebuild any I have the wiring charts but the hardest thing will be buying new parts and some tools since I’m trying to save up for a car rn

[@davidschumacher52]

Glad your doing well and back to making content. I find your vids to be informative and relaxing. Keep up the good work!

[@andrewtaylor5421]

Thanks for the new video, I enjoy them. So nice to see these bikes getting fixed up. ✌️

[@justinrjensen2]

happy to have you back

[@ke0ourwilliam982]

So good to have you back

[@indianna5649]

Fantastic explanation. Thanks again for your sharing your experience.

[@BusterB2398]

I REALLY enjoy your videos ! Keep it up cuz i got sad when you quit posting but I get it ! Life happens no hate ! But very happy to see you do a couple new videos ! 📹

[@winterowskie]

glad to see you back, these videos helped me a lot with mine chinese 110cc cross bike 😁

[@luluvacheslav6698]

Lets Go!!!! Nice to see you back!

[@deepsouthgrease]

Glad to see you back brother!

[@sashaf.5176]

Thanks for sharing. your videos have helped me bring a 200cc Chinese quad bike to life.👏👏👏👍

[@frank1128]

I rebuilt a 200cc atv for my nephew. After fixing so many hacked splices in it I just decided to buy a new harness. Solved so many problems.

[@shanelay4519]

Carb video would be great also glad your back keep them coming out man.

[@brknpropfpv3899]

Thnx for posting, been missing your videos. Good bless you and your family. Aloha 😎🤙🏻

[@stropcity1666]

Great job... Man wish i was close enough to purchase one from u. Keep up great work...GOD BLESS

[@jtveg]

Great build as usual and your advice has helped me a lot with my recently obtained really poor condition Chinese quad bike. I share your frustration and pain when you have to diagnose some weird intermittent problem. Mine was due to a blocked jet in the carburetor because the previous owner had removed the fuel filter thereby allowing rust particles and other fine gunk to block the jets and had also accumulated in the bottom of the carby bowl. Thanks so much for sharing. 😉👌🏻

[@southernjustice615]

Hell yeah! Another Awesome video!! Great Job!

[@jeepinwithjim9894]

Another great video BJ. A carb video is an excellent idea 👍. I always stick around to the end to watch the kids enjoy the fruits of your labor.

[@joshuageorge7758]

You spend almost as much on carb cleaner as you would ordering new, they come pre adjusted, new filters, and new plugs, and new fuel lines and clamps for $20-$25

[@adriansellars6846]

Inspired me to get a project for my son have it apart now but waiting for warmer weather to get back on it. Fun way to teach my son who is 4 going on 5 so you can imagine what thats like. Look forward to your next project.

[@rusackson]

Great Videos keep up the quality content. I was having all the same issues you were having in this video. I had all the components of Fuel, Air, Compression, Timing, and Spark! Low and behold the Crank Position Sensor on the Stator can be adjusted! Fought for days, pulled the flywheel, new plugs etc... Turned the Crank Pickup a millimeter or two and it fired right up and is running perfect now. Thanks Again! gave me an insight of where to look.

[@josephjenkins415]

Great video man! I’ve watched a lot of your videos and it’s helped me to fix my kiddos atv’s! A carb video would be greatly appreciated! Keep it up! 🤙🏻🇺🇸

[@EATSLEEPFARM]

This is why i use a pico scope for almost everything even quads anymore. After i do the basics and i still have an issue the scope will always let me know where im at. Glad you figured it out👍

[@Lorddarthvader1701]

Hope things are good, Happy New Year, hope to see some more videos from ya

[@randywhite7434]

awesome work bro

[@danieldelarosa8806]

Always greats videos and informative

[@ttmoto9754]

Hello, i really hope you are coming back i have to come back and just rewatch Your videoes every now and then because they are so good. You have not uploaded in almost 2 years and you still have almost 30 thousand subscribers. That just tells me one thing, I’m not the only one that want you to come back to you tube. Good luck with Your health and i hope we will se some more content from you in the near future.😊

[@kenanlynch8454]

Amazing video mate 👍🏽

[@jakebrickhouse]

+1 for the carb video!

[@Leon-cq1th]

Thank you for the videos

[@charlestresnicky1144]

Im glad the youtube algorithm brought me here, kinda wish I got here before. Great content man.

[@Danfrd]

I've watched all your ATV videos and noticed you don't really mention clutch, sprocket and chain maintenance and replacement. I see a lot of people also mention carburetor maintenance requests. Your videos are so well done, thanks for the uploads.

[@natyboyy1689]

Love the videos man I'm a new fan

[@phillipmier2589]

Post a video of you riding wheelies all the way down the driveway.

[@ericneumann529]

great to see you back and in better health, learned allot from watching, and wanted to say thank you because you helped me restore a 150cc Tao Hummer for myself and a few rebuilds on 125cc for friends, looked for that engine stand you have but then remembered its custom made so fabed my own, had to laugh when you said about the guy pulling the timing chain tensioner and the spring flew off, had that happen too

[@Exocet-ep2mk]

Yeah, that spring got me too. Thing shot out and scared the mess out of me.

[@z4mbz848]

WELCOME BK to the best mechanic on atv💯🔥

[@sk8punkXIII]

Found you wile you where on vacation we will say and you are a wealth of knowledge keep it up. The carb vid would be great.

[@ronniemartinez1070]

He's Back!!🔧💪🏼, And Yes please on a video to clean, set and tune the carburetor BJ.. Much obliged Sir!

[@gkcoupe]

Bro I just found your Chanel and damn you're a scientist with it my man. It's a shame you don't put out content more often. I've learned a lot from your posts. I would definitely appreciate more when you get the chance.

[@paulhines623]

a whole video on the carby would be great

[@juanalvarez8416]

Love the videos and info. I started this little hobby a few years back. I have an issue with the electrical. Connect all components to it's correct connections. When I hook my battery up the negative post sparks and my fuse starts to glow. It's a 2019 extreme CRT 125-1 ATV

[@4mericanp4triot93]

Where did you get the tabletop engine stand? Bought or diy? Thanks for the great vids that gives us diy’ers the courage and info we need to learn to do what we love!

[@drewjans3547]

Missed you man!

[@sonmorales3844]

Hey man good video.

[@scienceclass1014]

You deserve more subs❤️❤️

[@Anchor-Tractor-Man]

Your harness vids are best on KZbin! Thanks man on helping me revive an old Ducar 125cc 4spd manual that I built for my daughters 13 years ago and has sat for the past 10. I've got some left over plugs from my harness...lights??

[@wandajames6234]

I hope you are doing well-- I've had 13 surgeries but still keep crawling out to the backyard trying to get my neighbour's grandson's 110 cc Zongkang quad going. Have replaced all wiring. The starter spins on a bench test but when I put it on the atv it won't spin. I apply direct current to the starter case and all I get are sparks... am going mental over this thing so I really enjoyed your rant... the language coming out of my backyard is not fit for sailors, lol! Have no idea what to do next but it will be aggravating, whatever it is!

[@ttmoto9754]

Welkome back love Your content👍

[@ivanxd796]

Nice you got back on yt

[@100610victor]

Found your channel 4 days ago and I'm almost out of content... more videos please 🙏

As you mentioned in the video, a carb video would be great. I recently have been fixing on an old chinese atv also and ordered a new carb and wiring harness, but it still ran like crap. Just this sunday I noticed that the main jet in the carb did not have a hole in it at all. No hole what so ever... Really annoying and must have been a production error, but after drilling it with a tiny drillbit it actually works now. Just wanted to share that ;)

[@ShawnForbes]

yes pls do give us full carb cleaning adjusting and tuning video. 😁

[@sketchedwearhouse8792]

welcome back

[@bigbullhorn8443]

EXCELLENT

[@bryonnagle4329]

Hey bj where you been buddy love your videos miss seeing them hope your back is better I know how it feels I live with back problems too hope to see you soon

[@tacticool_twitorists]

Thanks man

[@eagleguy007]

I love your videos

[@damionmanning9174]

Hey mannn miss u welcome back

[@Mack.of.all.trades]

Awesome stuff. I just posted a video like this. Definitely takes getting used to when trying to film and fix stuff lol

[@ALMIGHTYGARAGE]

Dang bro this just happened to me lol remember when I asked you on another video for help cple days ago lol that's what happened I washed it the stator went out I put a new one on and some the bolts came loose lol and I put a new staror on it and it's fine now lol I still need to find a new harness tho it's a 110 b with the rear foot break pedal normal harness won't work bc don't have that but yea I spent a whole day and half n hrs of research lol I feel you bro n that quad is cool how much u sell it for I been getting around 500 outta them picked up two of these for 150 already sold the other just carbs on both well now I'll have to get this wiring harness and u taught me that thanks bro

[@sergioperegrino2310]

Great content I'm sure we have all felt your pain

[@jeffferguson899]

really hoping you are going to start making videos again soon.

[@michaelcaligiuri9315]

For the rubber seals soak them in transmission fluid. Would help swell the seals and maintain their elasticity

[@117moose]

ratchet straps idea is a good idea

[@PraskaBoysGarage]

I really needed a second set of hands! The strap was the next best option!

[@campdr]

Great videos. I came across your videos when fixing my first troublesome project. I am wondering if you have ever come across the Zhejiang Jonway ATVs? I have a 110 and 125 that i am currently working on and the carb and witlring are slightly different than the more common ones. I have managed to figure out some of the 110 wiring but the 125 seems more complex. It has lights and an instrument panel with gear info display lights. Any pointers would be greatly appreciated since most of the parts that I am finding are different for electrical components. Thank you!!

[@mdionnejewellducote8104]

I just found you and I’m glad I did! If you had to replace the engine on this, what would you get? I have a 2016 ray tech/Qiye 125cc Semi automatic.

[@edjones525]

I appreciate your videos! Yhey have helped me out a lot, thanks for what you do. Gotta ask, is this all self taught, or what school do you recommend going to?

[@Funny_moments763]

Bro comes back every 2 years 😢

[@salvadorramirez5584]

Would like to see a 200cc 250cc Chinese atv build overall best diy videos on KZbin 👍 👍

[@N8sjep]

Great to see you back BJ! You’re the major inspiration in my own Chinese atv obsession/hobby so I’ve been slacking on fixing all of mine for the past year, now it’s time to get back to work! I have a question about plastic carb spacers: I notice you’re not running one on the 125 in this video, I keep having them crack and blow out on the first run with my 110s, not even heavily torquing them, just lightly tightened. Do you recommend not using spacers at all? Thanks man, you’re the best!

[@N8sjep]

Does anybody have any input on these spacers?

[@StevenChaosCloud]

It’s all about the spacing you have if you need one or not. You get the same result with just the oring on the carb next to the input shaft. All that matters is no air leak.

[@Leon-cq1th]

Praska boys garage. Awesome work and good explanation. It has helped me in the past on a few projects. I have a question maybe you can get me a clue what to do. I got a 250cc roketa Chinese quad and tried to install the wiring harness and it doesn't do anything except keep burning the fuse. I did another one 50cc successfully but this 250cc is giving me trouble.

[@marchood99]

40f is tropical here lol 🤣🤣

[@jacobtucker9765]

Like see more scooter bulilds all great

[@chrstofuchaos]

I could really use a carb video. Would love an in depth on how to find the correct main jet when you have no info on the engine or the stock main jet. How does one figure it out? Ball park based on engine size? If so, what's a good starting point?

[@joshluksich8052]

Hey man love your videos. I was hoping for some advice, i got an ATV given to me for free, but it didn’t have any fairings. Would you know if any type of fairings would fit?

[@chrisprivitera8827]

Carb video would be awesome

[@kelleyadams7619]

I miss you videos

[@moea.9333]

Where u att bro come back.

[@jaycole6876]

I have a 125 ice Bear ATV and who I got it from tore the wiring apart. I thought it would make more sense to get a new wiring harness and rewire it back to factory but I'm having issues with not getting any spark. I have a three pin plug on the back side of the harness that goes into the brake light that I do not have the brake light and there's a two-pin plug next to it and I have no idea where that goes because there's nothing back there for it. I also have it black wire and the yellow wire with a green line with two clips on each end that I have no idea where it goes to and another two-wire clip. Same color wires. I can send pictures. Just hoping you get this message

[@juanisaac9515]

Hey Bj love your videos man started with the kids atv’s now I’m building Ruckus’s and Maddog’s GY6 can I get you opinion on the NCY Decompression tube is it worth it

[@Buddy0391]

Please do a carb clean and tune video

[@cmjsparky2618]

Thanks bj for the electrical wiring harness. I'm restoring a baja 90 for my kids and I got it running. Anyways it's missing all the plastic trim bolts and a few engine mount bolts any idea where I can find a kit?

[@liam6488]

Carb tune video would be good how to set air fuel ratio idle correct etc

[@jackas1583]

Hey BJ, my atv has 5 wires for stator connector. Yellow, white, blue, blk/red n green. And i bought a stator which has green, blue, yellow, reddish n black. Could you pls kindly advise which go where? Thanks great videos... Because of your inspiration i decided to change mine.

[@c.brewer9388]

Hey, I've watched a bunch of your videos which have been very helpful. I was wondering where you got the engine stand from? or was made by you?

[@Smalltechguy]

I've subscribed to your channel the first time I watched it. I get a lot of customers with these small engines as well. At times though I feel it easier to get a new motor. I have the same engine back again because it stopped running after it was good to go a few months ago. Now it doesn't run or won't pop. A head castle nut has been lost. The compression comes in at 90 PSI and has spark. What get me is why do these cam gears always turn 180 off???? I fell that is probably the issue. It was fun though being that it seemed that you always found the easier bikes to work on with success and this one was the Gremlin....

[@TrentonB123]

Says I’m not going outside…. Proceeds to go outside lol.

[@jacobvankomen9715]

What happened to this guys he doesn’t upload anymore loved this dudes video hope all is well

[@garycrawford6912]

Im curious how long you been doing this with flipping the atv and china bikes. ? I been collecting the engines and quads for a while now love what you're doing

[@sooty305]

the best part of the video is " its 40 degress outside and im not about to .......... " ( Editor: shhhhhhhhhhhhhh just go outside... )

[@minnanen3500]

Hey man, I love your videos and was wondering if it is possible to change a 6 coil stator system to a 2 coil stator?