You'll be turning weddings into festivals with this SHEHD's 3000mW Laser

Join me as I unbox, review, and demo the Shehd's 3000mW Laser. I go over the DMX profiles using SoundSwitch.
Check it out: tinyurl.com/2n3wcar4
================ CONNECT ================
🎯 Subscribe: shorturl.at/CNQZ3
Instagram: @djdarylbennett shorturl.at/abcu4
For booking related inquiries, visit admdj.com
================ DJ GEAR ================
Chauvet Intimidator Spot 260: amzn.to/3GyeJ12
Chauvet Well STX 180: www.nlfxpro.com/well-stx180-6...
Well STX Mic Stand Adapter: www.nlfxpro.com/wellstx180-mi...
Chauvet Core 3x3: www.123dj.com/lighting/ledlig...
Battery Uplights:
Cedarslink 6.56ft truss: amzn.to/3ERxATw
Soundswitch Control One: amzn.to/3Xp1Axa
SoundSwitch Interface: amzn.to/3Fmk8ra
Donner Wireless DMX Battery: amzn.to/3EzzHdw
Donner Wireless non-Battery: amzn.to/3U1wpoJ
Bunn Gear Command Center: bunngear.com/
Yamaha MG10XU 10-Input Stereo Mixer: amzn.to/3VuGb4s
Evolve 50: amzn.to/3FnWWJa
EV ETX 18SP: amzn.to/3H2GrmX
EV EKX 12p: amzn.to/3EWtjwX
Sennheiser EW G4 100 Wireless Mic: amzn.to/3Flg4XX
============== CAMERA GEAR ================
Sony Alpha 7C Full-frame Mirrorless Camera: amzn.to/3H3FPxi
Tamron 28-75mm amzn.to/3XQrvy2
Tamron 17-28mm amzn.to/3FjoyPk
Tripod: amzn.to/3VLwtdL
============== AUDIO GEAR ================
Scarlett Focusrite 2i2: amzn.to/3XVzMkj
Kali Monitors: amzn.to/3gR9ZcD
Audio-Technica AT2020: amzn.to/3EVTBiL
================================
These affiliate links give a small commission to help support this channel at no additional cost to you. I'm only sharing gear that I actually use and like!
================================

[@DJJonny_]

can you do a soundswitch video on lasers. not many videos out there for soundswitch and lasers

[@DJDanyn]

Just gotta use a bunch of attribute cues. I've got a couple shows with a pair of these on my channel.

[@eddyuniverse]

yeah I agree, please do a soundswitch with lasers there aren’t many of those

[@DJDarylBennett]

I kinda go over that in this video, as well as in my other laser video. But I can make one that is more directed at laser workflows

[@daunchseva]

Sick

[@DJDXD]

Just a side note, you could use that door in the front to shield the laser from going lower than a certain point

[@DJDarylBennett]

Great point

[@DJDXD]

@DjShannimal the door is a mandatory safety standard. Kind of like a hard stop.

[@djtrend]

Thx for sending the link on idea sharing :-)

[@DJDarylBennett]

Any time!

[@AkiraInuProductions]

Hello again I finally got this the other day and OMG it is amazing and fun. Here is my question..If I use ILDA program will the laser automatically know it is ILDA program? There isn't a setting for ILDa only DMX 512, Auto then the preset programs. I am thinking and hoping the laser will recognize the ILDA program and I will be fine. Thank Jason

[@ZykoMike]

What hazer/fog machine do you suggest for smaller events? Just to get a light haze near the booth?

[@FlawlessDJs]

Can these lasers do white dots?

[@linusla6733]

Is the Laser dimmable and how can you do it in soundswitch? Awesome video btw :)

[@DJDarylBennett]

The laser is not dimmable. Check out the uking laser video, I go in depth how to use a laser with SoundSwitch

[@thabigo1]

@@DJDarylBennett how do these compare to the uking one's? This being 3w that puts them into a class 4. I believe the Uking you reviewed is a Class 3. I plan to do a laser show from my Yacht aiming towards the water :D Trying to see what setup I want to run. Thanks.

[@_Adaam_]

Hey Daryl, Would you considering doing a setup video for this product? Truth be told I hastily purchased one without much prior knowledge, and I'm struggling to get it functional. I have the DMX in connected to an Entec DMX to USB adapter (which is connected to my pc,) but I cannot get the laser to turn on using SoundSwitch. Think you could help me out? Great content btw.

[@DJDarylBennett]

Yes Im thinking of doing that. Note that this works with attribute cues, not intensity and color

[@_Adaam_]

@@DJDarylBennett hey Daryl, Got my issues resolved - was missing a driver for my adapter! Have about 10 minutes of visuals & lasers put together so far, all thanks to your tutorial!!!

[@BBTKALI]

great channel, I bought a 10 watt laser laser show system, and cant find it on switch or get it to link up, any ideas on how ?

[@DJDarylBennett]

Ask support or use the fixture editor

[@AkiraInuProductions]

I am in the process of doing the FDA variance forms. These forms seem very intimidating and complex. Doni have to fill out every form on the FDA website. Everytime i use the laser will i have to let the FDA know and give them information on the venue. I am hetting this only to mess around with it at home and using DMX and i am hoing to buy the software too. Thanks for any help on 5he FDA forms wiuld be appreciated. Ty

[@DJDarylBennett]

I agree with you, they're very intimidating and complex. I haven't filled them out myself

[@AkiraInuProductions]

Soni want to buy this one 3watt or berter yet the 6W..this whol fda variance paperwork is really intimidating. If i am looking at this.paper work. I have to send them detailed diagrams on where i will be using it. It won't be for public use just having some fun and learn dmx and some of the DMX software out there. If i am reading it correctly everytime you want to use the laser younhave to file plans with the FDA?

[@DJDarylBennett]

From how I read it, it's every time it's a paid gig. Their own website sounded like it was a gray area if it's a free event. But it wouldn't hurt. Also you can use it at your own house by yourself, no problem

[@luimang4996]

This might be a stupid question. But can you create your own animations/images? Or is it all preset and you can only mess with the effects? Thank you in advance! I guess kinda in comparison to laseros

[@DJDarylBennett]

I believe you can create your own with other software that has ilda

[@luimang4996]

@@DJDarylBennett Can you name some software? My bad I’m looking to get a production system but I wanna do all the research first before just jumping into it.

[@dickfantastic7908]

​@@luimang4996check out Pangolin Quickshow and the FB3. Yes, it's pricey at $550, but you get control over all aspects of the laser.

[@nomikosthegreat]

Can you control this laser with show xpress(lighting controller) program?

[@DJDarylBennett]

Absolutely

[@wouter1327]

Do you know if it's possible to create and program your own custom graphics/paterns?

[@DJDarylBennett]

Yes it is with the ilda

[@wouter1327]

@@DJDarylBennett ahhh thats pretty cool, thanks for replying so quickly :-)

[@ChrisJohnson-pc3pd]

What is the interface that allows you to cxonnect the laser to your computer.

[@DJDarylBennett]

I'm using DMX, so I'm using the SoundSwitch dmx usb interface. But I believe you can connect this to quickshow

[@ChrisJohnson-pc3pd]

@@DJDarylBennett ok I ordered the dongle interface today. So I am hoping that I can use that to connect to my laptop and then just download southswitch. And that's all I should need to program the lasers to do what I want.

[@Partyatmosphere]

Is this varienceable ?

[@DJDarylBennett]

Some people say that they have. I personally haven't tried

[@djmkai]

Can you show us the sound to light mode? Maybe with some Hardstyle music?

[@DJDarylBennett]

Sure i could maybe do that

[@djmkai]

@@DJDarylBennett that would be amazing because I'm actually thinking to buy one 😁

[@geemann8099]

It's a laser not led

[@leesinthemix]

You should not be using such a high powered laser with Soundswitch. There are NO safety features built into the software. Crazy!

[@Flash-fw9mq]

Umm, I don't know how much experience you have but it's called an e stop. Emergency Stop Switch and it's external, most lasers will not power on without a direct signal from an e stop going into the data port.

[@leesinthemix]

So what?@@Flash-fw9mq I'm talking about laser zone projection mapping, which is not possible using Soundswitch. Zone projection mapping prevents lasers from pointing at a crowd.

[@Flash-fw9mq]

Without proper training and understanding of what you're advertising, I'd advise you to refrain from such videos in the future. You can literally burn your house down with a laser like this but you have no warnings. You don't cover e stops. You don't cover precautions. I don't believe you to have any real world experience with lasers. I understand these are crowd scanning lasers but there is absolutely no excuse for giving instructions for operations without information about precautions. Also your laser balance is off and you're lucky you didn't kill your camera by letting the laser hit it. DJs have absolutely no business reviewing lasers on KZbin.

[@DJDarylBennett]

We have another video going over laser safety which I reference in this video. We just go over some of the main specs provided by the manufacturer, which includes safety instructions, and I advise everyone to review