Mower Medics Tees, Shop Rags and More! Back in stock!! www.TARYLFIXESALL.com
@davidbrennan53 ай бұрын
That is a keeper, I work on a lot of saws and never saw one like that.
@bmca88763 ай бұрын
Tralee is in county Kerry, pronounced trahlee, hello from Ireland☘️grassrats! Irish eyes are smiling 👀
@georgemartinezjr3 ай бұрын
Oh Danny Boy !
@qzorn44403 ай бұрын
Ouch, I just learned somthing. 😎 Thank you.
@bmca88763 ай бұрын
@@qzorn4440 there was a tame dolphin 🐬 called fungie at the nearby Dingle bay,but it has disappeared,
@michaelcorvin43303 ай бұрын
The "Fire it up!" editing with Elkskins was complete madness. I enjoyed the hell out of it! 🤣🤣🤣
@pyrog.c.c893 ай бұрын
That spring load is awesome. 🇺🇲
@python357magnum1003 ай бұрын
The Best chain tensioner design I’ve ever seen. Can’t believe all the manufacturers don’t use that. 👍🏻🍻
@onestopfabshop32243 ай бұрын
I know right, it's stupid simple.
@Watchyn_Yarwood3 ай бұрын
Agree!
@mudhustle3 ай бұрын
Because it's a little spring in there. No real manufacturer would use a spring in such an important part of the chainsaw.
@Watchyn_Yarwood3 ай бұрын
@@mudhustle That little spring does absolutely nothing except take the slack out of the chain by moving the bar after the bar clamp bolts are loosened. It bears no weight and serves absolutely no other purpose.
@python357magnum1003 ай бұрын
@@mudhustle Yeah they use a 8/32 screw or similar pain in ass instead.
@rayben3303 ай бұрын
Hey Taryl!!!!! Today I fixed my first small engine!!!! Thanks to you and your videos I had enough knowledge to fix my Stihl FS 38 . My carburetor was bad. I ordered up another one, and damn if I didn't install it and when it was all done I gassed it up and itran like a champ!!!! NOW THERE'S YOUR DINNER!!!!!!!!
@kd5byb3 ай бұрын
AWESOME!!! 👍😃
@Montana_horseman3 ай бұрын
Very cool! I just left a comment about how learning from Taryl helped me fix and old weed wacker. It was an FS 36. Rebuilt the carb, replaced lines etc and it runs great again. Good work on the FS 38! 👍
@rayben3302 ай бұрын
@@Montana_horseman man I've always wanted to go to Montana. I lived in Colorado for a few years I loved it but I heard Montana is amazing and I see in your videos
@billygdupree62703 ай бұрын
Tractor mechanic here. The OG gas tractors came with Marvel Schebler carburetors. Ford, Ferguson, and I've seen them on some old John Deeres. Great video, Taryl. 👍
@kirstenspencer36303 ай бұрын
Old gasoline welders too.
@bruceferrero81783 ай бұрын
Small aircraft carbs, also.
@philliphall51983 ай бұрын
I remember when they were common 😢
@twt0003 ай бұрын
This saw had a Tillotson carb though. You can see it.
@bradbarefoot29863 ай бұрын
Sold those when we had the OPE shop in the mid 1960's, good saws. We were also Homelite dealers as well. We got those saws from Speciality Welding (now Sunbelt) the small 12" models actually came in *blister packed on a sheet of cardboard like a tooth brush..
@alext88283 ай бұрын
Cameraman gotta receive an academy award here. Fast and accurate. Kudos.
@Old600Rusty3 ай бұрын
Kyle, I believe.
@michaelglynn26383 ай бұрын
Definitely a good thing on the tensioner, she's powerful too! Good old stuff again. Thanks Taryl and team. 👍
@tarylfixesallskits3 ай бұрын
Another thorough and cool old piece of forgotten history
@garyalford93943 ай бұрын
Never ever seen that adjuster before! great idea!!
@patjohnson31003 ай бұрын
Forty years later the Castor is still a nice perfectly practical tool. I'm glad TD was willing to do some detective work to figure out the oiling and bring it back to life. Great addition to the museum. Wonder if Castor is still in business.
@iceman95493 ай бұрын
Spring loaded tensioner is a great idea. Awesome job Taryl. 👍👍👍🇺🇸🇺🇸🇺🇸 Fire it up. Fire it up.
@billborden91793 ай бұрын
Bringing an old saw back from the dead! Way to go Taryl! A nice add to your collection.
@tomessary40993 ай бұрын
Refreshing seeing you revive what others would not try! Gives us grass rats hope! THANKS!!!!!!
@rogershields21063 ай бұрын
I bought an Italian saw in 1980 an Olympyk 264. I have a bunch of saws mostly Stihl however this old Olympyk 264 has been used extensively for all these years. I take care of the old girl but it always starts right up and runs beautifully. Very good saw, when I bought it the fastest reving saw saw I ever ran. 12,500 rpm 20:1 mix and 20 inch bar on 61 cc av power head.
@user-ic6km2cl8b3 ай бұрын
lock and load tensioner cool !!!
@lsj13 ай бұрын
I like that adjuster a lot. Very nice saw, Taryl. 70cc’s of power.
@charlespotwin91073 ай бұрын
Max and Jax are 5 and love your show! They wanted to say hello from Vermont
@leerusch73923 ай бұрын
All saw companies should use that type of tensioner.
@Montana_horseman3 ай бұрын
I work on chainsaws a lot more than my mowers, mainly because I use the chainsaws year round. I've learned a lot from Taryl and a couple other good mechanics on YT over the years. Just for fun, last year I went back to work on an old stihl weed wacker that I never could get running and had been sitting for years. Took it apart, rebuilt the carb, replaced the lines etc.. The things been running like a champ again ever since. Couldn't have done it so easily without learning from people like Taryl. 👍
@matthewbeals3423 ай бұрын
Sir Taryl, Tell Mr. Cameraman to increase the aperture setting on the camera. Your depth of focus is too shallow making the autofocus dance around. If the settings are set to automatic, change it to between F5 and F8. This will keep your work in focus better. Good luck! Matt
@garyalford93943 ай бұрын
Nice running old saw ! they made alot of them better back then!!
@ristomattikolsi57113 ай бұрын
(53:30) They make great lawnmowers in Sweden and Norway. Klippo, Terrier, Stiga, Norlett, Caravan,... powered by Briggs, Tecumseh or Honda
@johnhowell2243 ай бұрын
yeah I have a mid 80's Homelite baby chainsaw. old poulan pro PP295 chainsaw. Enjoyed the video Taryl. I might get the poulan running right yet. I haven't had no time to work on the Homelite. Biggest Piece of Fecal Matter chainsaw I own is a Coocheer chainsaw made in China. It ran 15 seconds brand new. Changed the coil that went out. It ran for about 3 minutes after that. Most expensive paperweight I got for Christmas one year.
@chrischiampo76473 ай бұрын
Elkskins Was Happy When You Fired It Up Taryl 😊😀😊😊
@Danzilly3 ай бұрын
Taryl thanks for fixing this saw. It's a joy to see it run again.
@KNoone-kx1zb3 ай бұрын
I like the wall of signs and saws! The castor chain adjuster is sweet.
@keithschneider63483 ай бұрын
Awesome tensioner system.
@Tommyr3 ай бұрын
Yeah I like that spring loaded tensioner too!
@xcalibre2223 ай бұрын
WOW, You sure ticked off a lot of Carpenter ants when you cut that log.
@SpruceGoose-qx8zj3 ай бұрын
Mr Dactyl that is one heck of a cool saw!!!! Thank you for this upload man!
@paulwillard59243 ай бұрын
I’m ok with the idea of the auto tensioner, but I’m so used to manually adjusting chain tension that I don’t give it much thought after 45+ years of operating all major brands of saws.
@onepingonlyvasily3 ай бұрын
Hey Taryl, Tillotson Carbs were founded in Toledo, Ohio in 1914. It was bought out by Borg Warner at some point in the 60s and production was moved to Tralee in County Kerry, Ireland. I drive past the torn down plant on occasion. There's your dinner.
@oldkicker89583 ай бұрын
I would like to visit Tarly’s museum someday to see some of the equipment he used in the videos. Guy is the real deal!👍
@bungholesrus3 ай бұрын
Watching you bring that saw back to life reminds me a couple years ago when i brought my dads homelite super xl 925 back to life. Replaced the fuel line and fixed the recoil spring and it ran like a champ. Had to rebuild the carb a month later and now it has a 34 inch bar and chain that came in handy cutting up a red oak that came down a couple weeks ago
@davidhsloan87323 ай бұрын
the Wall of Saws should be added to the There"s You Dinner diner all you can eat place
@andybecker26933 ай бұрын
Looks like a Stihlch and McCulloch had a baby.
@SAGERODS250REM3 ай бұрын
More like Homelite.
@bubbaray5753 ай бұрын
Looks like an old Echo.
@jberry19823 ай бұрын
Id say Stihl and Homelite had a baby
@bungholesrus3 ай бұрын
To me looks like a cross between stihl and echo
@twt0003 ай бұрын
These Tillotson carbs are used on Stilch saws.
@williamickes31433 ай бұрын
I think the spring loaded tensioner is great. It should be on all saws!
@chaddumas24993 ай бұрын
The spring tension is a great idea.
@dkeith453 ай бұрын
FYI those refillable spray canisters are $40 at Harbor Freight.
@MitzvosGolem13 ай бұрын
Italy makes awesome machinery. I order Meteor pistons cylinders for saws made in Italy. Also I had Ducati and Cagiva 125MX motocross bikes . Many new Tractors construction equipment like Case use CNH Fiat diesel and Cararo axels transmissions.
@BFG_20023 ай бұрын
YES FINALLY SOME CHAINSAW DINNER!!
@Maik19683 ай бұрын
Hy Taryl and staff, it’s always my Sunday evening entertainment to watch your video, right with my Labrador Sam and me sitting on the couch here in Germany. I wish you a nice evening now in the USA and I will stay tuned next Sunday again. Hope we can see the complete new shop soon, sounds quite spacious, in reference to the echo 👍💪🍀🌞
@elsdp-45603 ай бұрын
Thank you for sharing. Like the tensioner👍
@kevinleee34083 ай бұрын
The fire it up fever dream was hilarious ❤❤❤
@bigjay67433 ай бұрын
That Spring tensioner is the bomb don't know why we haven't seen this before on saws what a great idea.
@AvaPxiaO3 ай бұрын
I like those European machines, they always have some unique mechanism that teaches you something. I hate some modern saws that have auto-this and auto that, especially on oil, I like to feel the oil pressurize and lube, I can't trust this auto feeding flimsy drip drop crap. How do you know it is clogged? Your chain turns blue purple and the wood smokes of burned chain.
@ClickinChicken3 ай бұрын
I'm saying this again, but I did this with my Toro 220 off one of Taryl's videos! Those little cube carburetors! It started end of this winter when I needed it. I used Parts pro Direct. FREEDOME!!! Wait, that was Scotland! lol
@ScottHiland3 ай бұрын
I had a little Craftsman saw from the late nineties/early 00s that had a similar tensioning setup. The failure point on those was the bar nut, which was a steel sleeve pressed into a piece of plastic that would deform when it got hot. The tensioner was fairly effective, though. Not as nice as this saw though.
@mikepoore16533 ай бұрын
If figured you flossed with .095 trimmer line.
@andys87183 ай бұрын
I like the auto tensioner!
@CatherineWeir-fs8pw3 ай бұрын
Taryl I love your videos and skits I. Am a new subscribers will be watching you forever and all your team love from Glasgow billy weir
@michaelschindele54843 ай бұрын
That saw is a dead ringer for the Italian made McCulloch that they were selling a few years before they went out of business. The only difference is they were yellow and black and didn`t have the auto - chain adjuster .
@onestopfabshop32243 ай бұрын
That oiler also could have had a preformed hose on it because of the sharp bends. I've ran into that only a few times where the preformed is the only way. Usually i can adapt with fittings inline to get my angles.
@NebukedNezzer3 ай бұрын
back about 1955 on the farm in minnesota. we had a mcculluch or something like that. I remember it was really heavy and clunky but worked. I was only 10 at the time.
@Japanese_moped_guy3 ай бұрын
Dude that natural born killers edit with snakeskins was FN MINT!!!! U should have went the whole 9 yards and made him the devil and threw in that ending song lol love it
@aleksandarvucicevic55663 ай бұрын
Same chainsaw like Alpina 070 also made in Italy.
@eldoradoboy3 ай бұрын
this is awesome!!! love seeing old things restored!!
@Supertech-863 ай бұрын
Podunk Shrinkflation, it went from Taryl Fixes All to Taryl Fixes Some!
@michaelreynolds18923 ай бұрын
I have a 1957 Homelite 6-22 running saw, might fit on your wall but would need a heavy duty hanger, 22 lbs.
@martinbenton7423 ай бұрын
I had a Sachs Delmar or McCullough chainsaw that had that "helper oiler". Pretty handy on old hardwood trees.
@melisabeauchamp84723 ай бұрын
I thought to check spark, you have to first get a friend to grab hold of the plug wire, then you pull the engine over😂
@SteveIglesias3 ай бұрын
Those Italians make quality good stuff that's a good quality chain saw,if the saw was going to be used to deal with the air filter issue would be a good idea to use a pre filter.
@LiveInOC3 ай бұрын
It’s the Lamborghini of chainsaws… Italian engineering
@christopherlgirard27323 ай бұрын
It's going to a museum. No need to sharpen the chain!😂
@geraldharkness88303 ай бұрын
great old saw taryl
@user-neo716653 ай бұрын
I have some old saws from the 60s that are mag cased but you would have to hang them from chains. They would laugh at those wire shelves. One has a 2 foot bar on it and the other has a 3 foot bar. They belonged to my great grandpa who used them logging.
@antoniomarc71743 ай бұрын
Nice piece of history that you have recovered. Love that wall you put together in you museum new building is coming along nicely…👍👍
@brianagee26473 ай бұрын
That’s a really neat saw!!! And yes that chain tightening system is really cool!!!
@shoptalkwithbrett65723 ай бұрын
Neat little saw, Taryl. Maybe it’s just me but, it bears some characteristics to a few of the old Lombard saws.
@MissouriOldTimer3 ай бұрын
the Pioneer 2071 had the spring chain tensioner , the saw was only made in 1971 and 72, I had one , it worked well .
@DaleSanders-cd7ql3 ай бұрын
Thanks again Taryl! Always inspired to fix it myself. We have a large shade tree and a picnic table where i do my repairs. I now have five chainsaws. People get rid of them before learning how to clean and maintain them. Thanks for all the how to videos. A fan in Northwest Missouri
@user-mn8ku5tm8o3 ай бұрын
nice old saw. I also have some old saws.
@petesliwinski91843 ай бұрын
A truly European adventure watched in Sheffield England 🏴👍
@johnb55193 ай бұрын
Those older saws aren't high rpm zingers like the new stuff, but they have more torque. I find the lower chain speed seems to keep the teeth sharper longer, especially through dirty wood.
@TGMForum3 ай бұрын
I'm surprised STIHL don't adapt their spring tensioner system they use for tensioning the belt on their Paddys Motorbikes. Surely they can do similar for their chainsaws.
@iamburl26673 ай бұрын
Wow very thoural video, my compliments to tyrals knowledge and the camera mans patience, thank you all so much
@scottmason50483 ай бұрын
There is new air filters on fleabay but their expensive. Great video
@Mcfeo43 ай бұрын
So glad I caught this one. It's been awhile since I've been able. Really appreciated Taryl's chainsaw class! The sleeve work around, the coat hanger (I've spent an hour looking for my extraction tool, could and should have just used a coat hanger), the machined side of the carb! Plus, Tary seemed to be in high spirits during filming which really adds to the watchability part if it. Thanks fellas! Can't leave w/o mentioning the camera guy. Loved the new angles or new camera??
@roaridanbuzerak87613 ай бұрын
that chain sharpener, its like staring at an angel. blew my mind today good sir, and now i long for that machine. why would you show us something so amazing. Please taryl, do a video on just that chain sharpening machine. does it do .404 chain? how big or small? i need to know.
@silent19673 ай бұрын
From what I see online most start at about 1000 bucks and go up from there. 😢
@Phatty0573 ай бұрын
He does have a video on that machine...:)
@rogerstlaurent87043 ай бұрын
@@Phatty057 yes he has done a video on that machine Payed good money for it
@jeffpiatt38793 ай бұрын
If Jay Leno were into lawn equipment his museum would look like yours.
@xr7coug3 ай бұрын
Every shop needs a museum!
@bucketsgarage3 ай бұрын
Now that is a cool saw!
@rickyh47963 ай бұрын
I just started collecting saws, and I have never heard of this one. But really like it. I just got for free an older Redmax G621avs saw. Same issues as yours with a bad fuel line. Replaced it and runs like it's new.
@JohnSmith-pl2bk3 ай бұрын
Taryl...does the fuel tank clunk filter hose not need to be really flexible normally... so that the filter can flex the tubing to allow the clunk filter to fall to the far reaches of the tank.. or even the top of the tank when the saw is upside down? That Tygon tubing seems to allow that.....
@alasdair41613 ай бұрын
Those carb diaphragms can be easily restored by soaking them in brake fluid (ethylene glycol) for a couple of days. They come out soft and supple like new.
@ristomattikolsi57113 ай бұрын
It's good looking saw. Italian design.
@rebkhai3 ай бұрын
I don't know what it is, but when Taryl cuts the tube it has a satisfying pop. Maybe the camera? Or his Tarldactal strength?
@DaleEarnhardtsSeatbelt3 ай бұрын
man doc neon knocked it out of the park with those signs.
@n8BDetroit3 ай бұрын
Very cool! Taryl is #1!!!!!
@williamcarl42003 ай бұрын
I paused to take a good look at the layout of the flywheel cooling vanes. I wonder if the different sizes improved air flow?
@joeanton30783 ай бұрын
The chain tightener is a great feature, but now a days no manufacturer would spend the money to do it!
@dougthornton68843 ай бұрын
Super video !! I like that saw. And I like your sign and saw wall !! Old is good. Like you Taryl. Huh Huh Huh......
@ianahmet92863 ай бұрын
Hi Taryl that chain tensioner looks like a great idea simple to use ,another great video thanks Taryl
@rustyrepairs25653 ай бұрын
Like naming your son "toaster oven" ! LMAO.
@BFG_20023 ай бұрын
Nice work as always Taryl. You gotta do a video on that old electric start McCulloch.. I wanna see that baby live again too!!
@Jim-z3c5 күн бұрын
That was a masterpiece possible academy award
@stan10273 ай бұрын
Not that I think you would need it, but there is an illustrated parts breakdown for this saw in the interscreen