YOUR GUIDE TO MAKING SOFT PLASTIC LURES; Everything YOU Need To Know To Get Started Pouring Baits!

[@ljerasmus2550]

*Lures looks very realistic even prunked my friends with it.Looks very durable **enjoyable.fishing** recommend sunk very good into the water.Cons: Storage package could be bigger.*

[@bdfloresa]

Having fished multiple s in different sizes and colors, kzbin.infoUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 this is by far my favorite. One thing to be aware of is the sided willow blade. One side is silver and the other is the green/orange shown. This is not bad, just unconventional. In terms of fishing, I have found the lure works just fine without a tail like a craw or shad. That addition is up to you. Also, the hook part where you attach the swivel snap or tie the line is a problem on baits these days, since it's able to slide up and down. However this lure seems to be tight enough that that doesn't happen often, and you can solve it by putting a thin slice of medical tube over the hook before attaching the line. Like others have said, it's really magic on a good windy day.

[@jordanfriar8732]

Dude, you deserve more subscribers

[@WorldsWorstFishing]

Jordan Friar Thanks man..trying my best to break out haha

[@idkwhattomakemyname101]

yeah its a shame there's almost 67k views and only 19.4k subscribers

[@nathanroberts5854]

I have been thinking about getting into making my own plastics, I never knew what actually went into making them. This was a very informative video that really peaked my interest. I priced everything I wanted to get started, it's def. not cheap to start, but I think in the end I will get a lot of enjoyment out of it. Thanks for sharing, tight lines!

[@hhall7152]

A huge thanks for the videos you make. I'm about to take the plunge and start making my own soft plastics and having watched most of your videos I'm a little more confident than i would be without them.

[@WorldsWorstFishing]

H Hall my pleasure..many more videos to come

[@skatemetal5062]

Best intro ever so far for the show . Tight lines

[@copperheadfishing7258]

Great video. I’ve already purchased my essentials and getting ready to start. Subscribed 👌

[@SlimeDonkeyTV]

Right on man! Stumbled upon your channel, making your own baits sure saves a whole lot of money once you get everything! Good stuff!

[@WorldsWorstFishing]

Yeah it's the "once you get everything" that sets you back thousands up front lol.. depending on how many shapes you want and how many color options you want, it can get outta hand quick haha. A fun hobby nonetheless

[@danieleatherly1135]

Worked with lure craft and there June bug was black purple and green flake but love your take on it .

[@fishingmn4517]

Pretty sweet stuff i plan on making my own soft plastics so i can make what ever colors i want lol

[@robertcates2549]

I use to hand pour and made my own molds by silicone. I got away from it but I really enjoy your videos, great job. I copied all your websites and have started to shop around as I'm going to get back into pouring. Thanks for the info and videos.

[@WorldsWorstFishing]

Flippen fish sounds good..I'd miss it if I quit plastics

[@robertcates2549]

Maybe you could help me out I'm on spikeit, they have soft, medium, hard, etc. When I use to pour I got plastic from MF manufacturing co. It was just plastic. Which is the best to use??

[@MrArcher0]

Remember Folks: Glitter is the Chlamydia of the tackle crafting world.

[@WorldsWorstFishing]

hahaha...its sure gets everywhere and never leaves!

[@basscatlildave]

Excellent video. Thanks for sharing your tips with us.

[@WorldsWorstFishing]

What video/colors would you like to see next??

[@ayvineidsness8220]

World's Worst Fishing you should make a pink senko

[@tylergibson2535]

Can you make another make the baits and catch fish video. I really liked the one you did in frogs.

[@WorldsWorstFishing]

Tyler Gibson Outdoor Adventures yes definitely..gotta get my boat back first 😂

[@jordantharp5899]

I would love to see a color similar to the Little Creeper All American Sunfish blue chartreuse. I've tried a couple times but not gotten quite as close as I'd like to and would love to see your take on it.

[@user-wo7rp6bc6t]

anything you making is fine. love your video. by the way Zman type plastics

[@basscatlildave]

I meant to comment earlier about the great job you do on plastics how to’s. I’m very new at this and you’ve helped a lot. My next major purchase will be a dual injector.

[@WorldsWorstFishing]

basscatlildave thanks..many more videos to come!

[@BigChungus1291]

Love the Thomas Lang drumming in the background!!

[@WorldsWorstFishing]

You know your drumming! He's the ultimate beast!

[@MrArcher0]

I have watched several of your videos after being recommended by my buddy at Marling Baits. Great informative videos. Great detail and organization. My only negative critique would be to knock down the background music by 30-50% in volume. Subscribed!

[@WorldsWorstFishing]

Yeah i have since stopped the background music...you probably wont find any in the past 4 months or so. I used to love it, but now I like it better without the music.

[@toddhodges7]

Awesome video. You inspired my to buy an injector and molds. Tried melting down some old plastics yesterday but couldn't get the plastic to melt all the way and it smoked like hella crazy haha. Literally I pulled out a piece of hell from the microwave. Would love for you to make a video on how to melt and shoot old plastics.

[@WorldsWorstFishing]

i have a few videos on remelt, check em out

[@benaudet1002]

Once I scorched a batch really bad and when I was walking out of my garage with the cup, the smoke from it blew in my face and it choked me up like there was no oxygen left.

[@WorldsWorstFishing]

oh dang that sounds bad...def be careful man

[@fatmaninayak1264]

Great video and thank you for answering all my questions and I never asked you. I would love to do this just was not sure where to start. Thank you love your video's

[@WorldsWorstFishing]

Fat Man in a Yak My pleasure..that was the point of the video. Tight lines

[@grindstonelures694]

Do you mind if I share this to my Facebook group called "Soft plastic Bait Makers" ? I believe this would help alot of the new guys out. Also you do amazing work keep the videos coming

[@WorldsWorstFishing]

grindstone lures Yes by all means..I'll have to check out your page!

[@grindstonelures694]

World's Worst Fishing it's posted bro thanks again an tight lines

[@WorldsWorstFishing]

grindstone lures no problem..tight lines to you too

[@scottiegrishamthequietfish3126]

Sure go ahead and post

[@briancash2149]

Do you have a full time job, or is this bait business just that? Very much enjoy all your soft plastic videos and have learned so much from them! As always THANK YOU!!

[@WorldsWorstFishing]

Brian Cash I work a normal full time job like most people..the baits are more of a fun side business.. although I started it with the intention of doing it full time.

[@jeremyhood5206]

Chris what how many ounces was your favorite injector? I remembered you said it's no longer available, but I'm fixing to order mine in a few days, and was need to know what the size of it was. Thank you, and once again thanks for all the info, and help you've given me!

[@WorldsWorstFishing]

It's a 9oz from baitjunkies..but he doesn't make them unfortunately..glad you like the channel

[@lightningstrikelures2393]

This was really good...Thanks a lot!

[@WorldsWorstFishing]

thank you

[@thecompleteangler580]

Thank you very much! Great job!

[@WorldsWorstFishing]

thank you for watching!

[@scottiegrishamthequietfish3126]

good info great video

[@northfloridafishing4272]

Nice video man we need to collab and do some fishing. I live in Crawfordville, Fl and would like to do a collab with you if you would want to. Nice videos man I'm just getting back to fishing I hurt my back early last year and I am looking for a friend that likes to fish to lol. I also have a Fishing Channel and about to start making my own baits myself this video helped out a lot.

[@bigbassboys4263]

do you need hardener and softener

[@JoeNorero]

You did a great job with covering everything thanks so much! Sub/liked/commented ;)

[@WorldsWorstFishing]

LA DUBSTAR Thank you! There's still so much I need to make videos on haha

[@michaeldob2153]

Hi! I am very impressed by your work and dedication!!! thumb up. I learned a lot from you. I am just wondering what you do with the staff that did not turn out or get damage? Did you melt them again ( even multicolor baits?) Or is there a way to buy the broken baits from you? thx Michael P.S. Merry Christmas

[@drysflys3046]

Good vid good tips try making baby bass color I liked and subscribed

[@WorldsWorstFishing]

Dryden Luther that's a good idea..and thanks for the SUB

[@northernshaver3111]

awesome video very educational brillient

[@manifestgtr]

Great music in the background. Very Allan Holdsworth meets animals as leaders 🤙

[@WorldsWorstFishing]

Thanks man, it's a Song arranged by one of the most technically advanced drummers alive, Thomas Lang, who has actually done joint drum clinics with Virgil Donati who has played with Alan.

[@tylergibson2535]

Congratulations on 1000 subs

[@ayvineidsness8220]

When will you know who won the baits

[@liamjesionek7489]

Love this thanks for the video

[@WorldsWorstFishing]

Liam Jesionek my pleasure..glad you like the video

[@Memorymode]

Can you do a double boil setup to melt the plastic?

[@bluegrassbass8798]

very helpful video

[@WorldsWorstFishing]

Thank you.. currently working on an updated version of this Video

[@gregthomas4605]

Great beginner video. Thank you. Do you know of anybody on social media that is airbrushing soft plastic?

[@WorldsWorstFishing]

Travis Crosman with Stankx baits does it.

[@gregthomas4605]

World's Worst Fishing thank you

[@Darkman-Fishing]

I have enjoyed all your videos, great instructions. How did you make the Degasser or where did you guys it? That a good way to save some cash

[@WorldsWorstFishing]

Erick Darkman Prado Bought the vaccum chamber online..glad you like the videos.

[@markchase9299]

Do you ever add any salt to any particular baits? Awesome video i enjoy watching them.

[@WorldsWorstFishing]

Mark Chase I only add salt to my senko worms, unless a customer says otherwise. And I'm glad you like the videos

[@VincentKearney1967]

Great video ! What would you use to make a floating trout worm ? Is there a special type of plastic you need to use or does all plastic float ! Also what is salt used for soft plastic baits ? Thanks for the video , you have a new subscriber!

[@WorldsWorstFishing]

Vince Kearney I would add a floating additive to the plastic for a true floating worm. Salt adds weight for better casting and makes a bait sink. Thanks for the Sub!

[@Ozzierob]

awesome thanks mate

[@bdcustoms3774]

Great video!

[@WorldsWorstFishing]

BD Customs thank you..

[@_usa_4155]

Try to make a silicone mold

[@WorldsWorstFishing]

MW Global Never done that actually..I've done POP molds and a resin mold..

[@mystic_tacos]

I'm wanting to try my hand at soft plastics but I want to try hand carving them and making the molds. Do you have any advice on the equipment (not the carving bits) one would need to make the molds?

[@toddlisby1018]

What kind of injector do you use? I like the handle!

[@JoePeanuts68]

Great video, but couldn't hear you at some points because of the music, especially around the very useful tip of using the hand vice.....I've subscribed to your channel.

[@WorldsWorstFishing]

Check out my most recent guide to soft Plastics video...audio is much better, thank you for watching.

[@JoePeanuts68]

@@WorldsWorstFishing This is great...just got into jig making....figured I'd do plastics as well. There are some good FB groups that you can promote your video(s).

[@GainingDespair]

Have you ever tried using silicone? What would the plasticizes silicone version be? I enjoy watching these videos and I do not know why but every time I do it just makes me want to try it but with silicone. I know Zman uses silicone and it floats, they like to put salt into the mix but after about 5 mins most of the salt seems to dissolve or at the very least enough does causing it to float when rigged weightless (my preferred method). Always felt adding a some ultra fine sand could prevent the floating, also wish Zman would at least try it but I highly doubt that will ever happen, I love their soft plastic... soft silicones but they mostly become useless to me after they start to float...

[@WorldsWorstFishing]

to my knowledge the zman plastic is not a silicone base..I have heard a few people in the industry talk about that stuff..regardless of what it is, it is injected totally different than how plastisol is, it is not heated up into a liquid, it is injected in a more solid stuff with special equipment that uses much higher pressures. Needless to say, the Zman plastic is not available to the market and is expensive to actually use.

[@kiyanooshC4D]

super.... txxxx

[@ronrodriguezjr.6062]

What name worm mold made those worms? Love the size

[@drewfreeland8792]

Subscriber 1000!

[@WorldsWorstFishing]

DREW FREELAND Dude!! Awesome..email me..you're gettin some baits!

[@jasonclark8921]

Great video great information really like that worm color. What kind of Rolex are you wearing I collect watches myself..

[@WorldsWorstFishing]

Jason Clark Thanks..glad you like the videos..sadly that GMT Rolex was made in China haha..what pieces do you have in your collection? I love the new Omega SMP and my two Grail watches are the Vacheron Overseas and Patek Nautilus

[@jasonclark8921]

World's Worst Fishing I have a few invicta dive watches and a few bulava chronograph I am looking at some different omega's I would like to get.

[@WorldsWorstFishing]

Jason Clark Omega is such a great watch..and half the price of a Rolex. They are my favorite brand

[@Aaronhowlett123]

How many baits can you make at a time? Do they sale molds for more than 6?

[@BiggameTechJourney]

Great video I just sub you. thank making video how to make your own soft plastic. You do deserve more sub bro. Keep good work bro I alway watch and support you.

[@WorldsWorstFishing]

thank you so much!

[@E-Weezy95]

There are different types of plastisol which one should I get?

[@randybuchanan2110]

Nice video. You from Tallahassee? I'm from Madison, Fl. I bass fish the small rivers for red eye bass. I'm going to try my hand pouring some 4 inch swim baits. Good info for me to get started.

[@WorldsWorstFishing]

Randy Buchanan yeah I'm in Tallahassee. Always wanted to catch one of those Suwanee bass!

[@nazeerfaras1666]

Sir I want Mould.. How I purchase How many price?

[@the-boogeymanofbruce6424]

What size are those metal hand clamps?

[@bunchamisftis6102]

is it okay to use a burner instead of a microwave?

[@mikel2817]

Hey bub where did you get your "grass grenade" mold from? I love that one..

[@WorldsWorstFishing]

Angling ai

[@richardmills8401]

My problems with injection molds is the plastic cooling to much before I finished injecting.

[@WorldsWorstFishing]

Happens to me still sometimes. Although once I shoot a few rounds my Injector stays pretty hot and the problem goes away.

[@CatboyChemicalSociety]

i mean i could just technically use isopropanol to remove the plasticizer from chewing gum till appropriate consistency is reachhed and then heat a bunch in the microwave and pour into moulds.

[@WorldsWorstFishing]

Ha now that sounds like a fun expiriment

[@waterwolffishing62]

How would you know when the baits are heated up fully

[@FrankDussaultFishing]

Ugly enough to gag a maggot 😂😂😂😂😂 You do a excellent job, thanks 🙏

[@WorldsWorstFishing]

haha thanks man

[@estott112288]

What plastic are you using for the majority of your baits? Is it soft? Or medium? Are you adding any softener or hardener to your mix? Not looking for an exact formula mix, just trying not to buy any unnecessary items for my initial start up. Thanks in advance

[@WorldsWorstFishing]

I'm a medium man.. Lureworks medium and dead on plastix jerkbait formula

[@tracynewman5246]

I’m looking at molds to get started what is your opinion of the Cast aluminum molds.. based on price are they juke?? or invest in the machine aluminum which are way more( I’m looking at CNC molds)

[@WorldsWorstFishing]

I would invest in the real deal..the cast aluminum won't make shiny baits.

[@tracynewman5246]

World's Worst Fishing.. thanks I figured as much 👍

[@milbanc4u]

What worm mold is that?

[@fishingbanhock]

Please add scent attractant on your video and it will be perfect

[@willb750]

What colors should I start off with

[@willb750]

Like the dye and stuff and the glitter

[@mikewest712]

Do you have any lizard/salamander molds? The black salamanders with yellow spots are in high demand in my area.

[@WorldsWorstFishing]

I do not have any of those molds.

[@garretthoward2226]

Pyrex cups/glass is made in my town🤘🤘

[@bombzgoboom2]

Ghost fan!! At 2:09

[@beerus1]

I need to make a copy from soft plastic lure. help thank

[@owenpoutdoors4605]

where do you get your molds

[@LennynSquiggy912]

The link for landisthelimit isn't opening.

[@therealfreekshow]

Go my stuff i have a 4oz injector how long should heat up 4 ozs ? And reheat if needed

[@WorldsWorstFishing]

i dont heat my injectors but I usually cook the plastic 3 minutes for 1 measuring cup depending on the microwave

[@christophelellig9723]

Bonjour, vendez vous des moules ??

[@Redreefmedia]

How do they do it in China? Are there bigger machines?

[@WorldsWorstFishing]

not sure, but chinese factories are the only ones that do it, I found only ONE american printer who was capable of printing the right kind of bag and they were 4 times more.

[@claynix961]

Is a vacuum chamber necessary to start out and were can I get the cheapest dual injector

[@jacobwatters170]

Clay Nix a vacuum chamber isn't necessary if you buy plastisol that is already degassed.

[@PudgyPastures]

Hey Chris...what do I use to clean the injector? I've seen you mention worm oil and a brush in a couple videos. Is that it?? Just got my plastic last night and shot a couple practice molds. AWESOME!! Also, do we need to do any prep for the molds? Thanks for all the great info you've been putting out. Keep it up!

[@WorldsWorstFishing]

Yeah just a brush and worm oil is all you need man.

[@Growbrojay]

where did you get the injector with the handle

[@WorldsWorstFishing]

Baitjunkys

[@sports4life720]

Where do you get your frog molds from

[@WorldsWorstFishing]

Sports4Life Designed it myself and had the molds made custom

[@nsmith7192]

You used a 2 cup pyrex, is it okay to use 1 cup pyrex?

[@bassnbluegill1406]

Yes

[@victorbanuelos8435]

Where did you get your Injector from?

[@WorldsWorstFishing]

Baitjunkys

[@carlomartinez5823]

where can i buy the ziplock bags that you use on your videos?

[@WorldsWorstFishing]

custom printed worm bags have to be ordered by the thousands from China, it's a very big investment so you want to make sure you're ready for it before you decide to get bags

[@fisherman2469]

Hey even better for mixing, an electric drink stirrer.

[@waterwolffishing62]

And are ready to pour

[@RSMdrones]

Where did you get the injector from

[@WorldsWorstFishing]

Baitjunkys

[@sarahschoaf3540]

Can I order those exact frog swimbaits off you that are in the thumbnail. Or better yet are you open to orders?

[@WorldsWorstFishing]

Yes I sell my frog and that color is fairly simple to make.

[@sarahschoaf3540]

@@WorldsWorstFishing If possible I'd like that frog in the green, and if you have them either 6 or 12 inch trick worms in the junebug. Just tell me how to place an order

[@amosdelapesca868]

how many senkos you get per cup of plastic?

[@WorldsWorstFishing]

Aldo Fraijo 20-25 if I don't make any mistakes

[@MrAlbeanz]

Where did you get your twin injector

[@WorldsWorstFishing]

Basstackle

[@MrAlbeanz]

Is that the 3oz or 6oz

[@MrAlbeanz]

Thanks

[@WorldsWorstFishing]

this is a 9oz version

[@Vyacheslav_klim]

Это просто супер 👍Я хочу твоих приманок, у нас нет таких цветов.. может получится мне отправить????🙏

[@walterholcher9239]

What about salts

[@alexdockrill]

What was the Latin that popped up ??

[@jonhanson8098]

I wish you would let me show you a cheaper way a safer way and a safer way for the environment. My baits are the same as live bait and are biodegradable with U.V light with a self life of 3 years. Yes a night crawler or Bloodworm that is good for 3 years

[@WorldsWorstFishing]

Email me at [e-mail]

[@thecompleteangler580]

What brand and size injector do you use? Thank you!

[@WorldsWorstFishing]

its a 9 oz

[@915hookinem1]

Where do you get your molds?

[@WorldsWorstFishing]

915 HOOKIN' EM check out the links in the description

[@915hookinem1]

World's Worst Fishing okay thank you, BTW you got me into making plastics

[@915hookinem1]

World's Worst Fishing when do you put in the dye and the glitter after you heat up the plastisol or before?

[@WorldsWorstFishing]

915 HOOKIN' EM before I cook it

[@WorldsWorstFishing]

915 HOOKIN' EM I do glitter after it's cooked

[@yakamarezlife]

I don't want to make them can you sell me some

[@kengarrett5015]

WHERE DO I GET A VACUME PUMP

[@WorldsWorstFishing]

Ken Garrett just look for one online, that's what I did