Your MOST ASKED polishing questions-ANSWERED! Podcast 105

[@Snkrheadzz]

Detailing not only helps me keep my sanity and also be therapeutic, but I also love seeing my paint on my car become shiny, and clean and also know that paint on a car should look like this. I love it!!!

[@diydetailofficial]

Excellent

[@claypatterson1968]

I’m waiting for the PadWasher. Been waiting. $186.00 is currently impossible for me. I see the need. I see the greatness. I see my current wallet too! I will go ahead and start saving up to purchase your pad washer just as soon as you get it out there. I will even test run it, lol.

[@diydetailofficial]

Should be ready for the fall

[@Snkrheadzz]

Lake country pad washers are available on Amazon. I bought mine two weeks ago .

[@twcutting3]

I’ve had neurological issues stemming from surgery that forced me to begin a new season of life or to curl up and die. Since I’m unable to work within my vocation, while no longer able to compete in road cycling and racquet sports, detailing provides the physical therapy of eye / hand / balance coordination I’ve needed to stay healthy physically and emotionally. A true feeling of relevancy that had been missing. Thanks for keeping detailing fun and fulfilling.

[@diydetailofficial]

Wow, Thank you.

[@TimothyJohnsonBey]

@@twcutting3wow. Amazing.

[@delmilligan4584]

By far the best detailing channel on KZbin 👊🏻

[@diydetailofficial]

Thank you.

[@grand04gt]

I love detailing as it is a wonderful getaway from the stresses of work with the added bonus of having an enormous sense of pride when its super detailed shining like crazy. The two of you are a phenomenal team as both of you always encourage getting out and doing your best while sharing your tips and tricks that could make your life easier but also listening and engaging with the rest of us should we have any issues or concerns. That is just a small bit of what sets you apart its also that you listen to potential tips. Wish you guys the absolute best!!

[@diydetailofficial]

Thank you.

[@algiordano9214]

Tremendous amount of import info. Ivan your team is doing a great job. Al, NJ

[@diydetailofficial]

More to come!

[@algiordano9214]

​@@diydetailofficialIvan I just received your gold polish and your yellow, red and wool pads. When polishing what speeds do you recommend. Thanks.

[@eppyz]

Retired Peace Officer here as well. I grew up around cars, and my Father was a car fanatic so the groundwork for my obsession with cars began quite young. While working in Law Enforcement, it definitely helped keep your mind busy to work on the cars, detailing,, modifiying and whatnot. I must admit, I spent A LOT of time in the garage and not as much time with my family. Yes my cars looked perfect, but my marriage wasn't and I ended up getting divorced after 10 yrs and had 2 kids. That was very tough. Over the years, there has been SO MANY PRODUCTS and SO MANY OPINIONS on what to use and how to use it. For me? I am always willing to learn, I have learned some new things here, I relate closer to Yvan probably due to our age, we are of a similar age and life experience. There are more than one way to do things, but as I am getting older, I want to work smarter not harder. Being in my 50's living in an EXTREMELY HOT climate where my garage can get into the 120's while detailing the cars isn't as much fun as it used to be, throw in a knee injury, shoulder injury and a back injury that cut my career short (23 yrs) I just want to keep things as simple as possible. I do appreciate the approach you guys have, and your products I have yet to try them (don't want to waste the products I already have) I do find the approach to detailing that you guys have a nice change to a very confusing and at times cut throat business. I have never done this stuff as a job, but have done detailing for decades on my own not just my own cars but friends and family. I just never charged them. I just enjoyed the process. Keep up the good work. 👍

[@diydetailofficial]

Thank you for your service. Detailing doesn’t have to be difficult, it should be something that’s done for pleasure.

[@TimothyJohnsonBey]

❤❤❤ thank you for securing so many futures with applicable knowledge. MINE INCLUDED!!!

[@diydetailofficial]

You are so welcome!

[@barrybinning3849]

Awesome job on the explanation of what machine to use on enhancing paint and using app properly with the right machine 3mm-8mm. How app is designed to open the pores of the paint with a certain orbit rotation. Really clear things up. Thanks Yvan!

[@diydetailofficial]

Glad it was helpful!

[@patrickkeschl596]

For someone new to DIY detailing, I have neither an Air Compressor nor a Pad Washer. I am sold on the Pad Washer. It acts like an old fashioned washing board with the spinning action of the polisher performing like the agitator of a washing machine. Great invention. I will hold off until yours comes out this fall. Can’t wait. Thanks!

[@diydetailofficial]

Thank you. In the meantime kzbin.info/www/bejne/raTbiJZ5qtijq8ksi=m2oXqnQdNQb7F0Qw

[@border056]

I told my wife that it would take me probably 12 hours to clean, polish, and put the stack on my car. She didn't believe me until I crossed the 15 hour mark.... It would have been 12 hours if I had a pad washer. Looking forward to yours.

[@diydetailofficial]

Thank you.

[@jaimezoracle]

DYI Team, I am waiting on your full system to be delivered to start my first detailing project on my new car. I have enjoy your showcasing and training videos for the last few months and I feel ready to give it a go. I will start on my 2008 MB C300 Black and later with more practice due my new car. I can wait to apply my 8-3 stack. Thank you for your products and guidane. Regards

[@diydetailofficial]

Thank you.

[@JoseanAutoDetailing]

I have a 8mm and heavy swirled paint, I did a test spot at speed 3 with the wool pad, and jewel pad. But did not see much diferrence. Is the 8mm not enough for that job? Should i get another polisher or try it on a higher speed?

[@diydetailofficial]

Try a higher speed, and yes a longer stroke will help

[@kenbarbret6632]

I use a DA to polish. Does free spinning the pad on the DA, to rinse out the soap and water, wear out the bearings faster by not having resistance of a surface to control the wobble?

[@diydetailofficial]

Not at all

[@scootytamra]

I'm glad you said what you said Yvan, because my 15 year old Focus has had evil things done to it over the years, not by my hand, but from horrible people, and even though i take good care of it, i know her paint will never be perfect, she has key marks on the trunk lid, and scratches on the hood, a dent from a shopping cart someone did 3 months brand new, i wash and apply sealant to it every 12 months to try to protect it the best i can, she sits out 24/7 in direct sun in my driveway because i don't have a garage. I don't own a polisher, as i don't think these key marks will ever be improved, they seem so deep. I do own a black and decker hand sander but i don't know if i'm confident enough to do anything as far as polishing. She also, ive notice has slight clearcoat failure over the passanger side door from sun damage.I watch your videos, Thank you for your teachings!

[@diydetailofficial]

Thank you.

[@jamescaravello8482]

Not sure if this has been covered before. I have a 2022 Mustang Mach 1 with a flat black decal down the hood and vinyl striping. Do I need to tape that off before attempting polishing? I was planning to do a one step process just to clean up light scratching. If so what type of tape is recommended? Love the channel and watch all the time.

[@diydetailofficial]

Yes, best to not polish it.

[@alexjerome5429]

Thanks a lot to both of you! That was my exact question

[@stevecharnasjr.7241]

You guys are awesome! And I’m loving your products! Would love to take lessons on how becoming a pro with the rotary with you Yvan! Fantastic information and education!!!

[@diydetailofficial]

Thank you. It’s a short lesson, use our system ( polish, pads), techniques and don’t try to work the tool, lightly guide it.

[@stevecharnasjr.7241]

@@diydetailofficial Thank you!

[@garden_hooligan]

Thanks for the insights. Couple questions … Good info on size and on your rotary polisher can you add info about what to look for in one? Second one is can you talk about paint correction for older vehicles (2000-2010).

[@diydetailofficial]

Speed range of 400-800 at the low end 2400-3000 at the high end. No different for the paint correction.

[@nathanandkategarcia1804]

C6 APP, I have heard other detailers say not to use products that "swell" the paint. Is C6 safe for all types and ages of paint? Is there a situation aside from C6 pro coatings that you would say lets just use the panel prep here instead of the C6 APP?

[@diydetailofficial]

There are products that swell and fill, C6 Ceramics Adhesion Promoter Polish (APP) opens the pores and makes it more receptive to coating. C6 Ceramics are safe for all paints and coatings.

[@404notfound.....]

Great video gentlemen!! 🇨🇦

[@diydetailofficial]

Thank you! 👍

[@Minjoeman]

Thank you for the video! I want to use AP for my prep and would appreciate if you could recommend a cheap palm sanders from harbor freight, Home Depot that work with your red pad.

[@diydetailofficial]

Any one you find.

[@SLC_Eaglesfan]

Great video! One question off your APP discussion about how long it lasts in the bottle, how long does the Gold Standard Polish last in the bottle if stored properly? Thanks for the vids and keep up the great work!

[@diydetailofficial]

About the same

[@Spirited282]

Thanks for the jam packed video guys. Just wondering, i have gloss black wheels on my toyota and have noticed some scratches, i imagine gloss paint you must be extra careful while polishing. Keep up the great videos.

[@diydetailofficial]

Yes, gloss black wheels are not fun

[@mcflotty]

Hi guys, I have a new car with a coating I’m not in love with on it. Is the red pad enough to take it off? Want to do Hydro Lite. Car is cared for with your products now, decon and all.

[@diydetailofficial]

Best go with the gold pad

[@mcflotty]

@@diydetailofficial Thanks guys. I appreciate it.

[@vasilisk8208]

Can the wool pad and 555 method be used on chrome bumper and then finish with yellow pad. Would that be the correct process?

[@diydetailofficial]

Yes, but it won’t do much on chrome

[@stewzep]

I was polishing my son's car, and was using predominately the yellow pad. I had two spots on the car that had a few scratches that I wanted to try and improve ,so I used the microfibre pad. I was cleaning the pads with rinesless ringing them out and spinning in another bucket. the micro fibre pad seemed to wear out in the inner part so I stopped using it. Is that an issue and was I doing something wrong. I was polishing outside and in the sun, but was doing small sections and wiping with a damp rinseless and using ceramic gloss right away. Car turned out great.

[@diydetailofficial]

What pad, what machine, what speed?

[@stewzep]

@@diydetailofficialThe wool pad. 8 mil Maxshine polisher. Speed 3.

[@stevenv9224]

I don’t do much polishing but that 25mm is really great it’s my favorite. You can cover areas faster and quick and get great results 👍🏼👍🏼💪🏼💪🏼

[@diydetailofficial]

Great to hear!

[@gorillanismo]

Awesome podcast! Question about the app: if my car has another coating but the paint looks good, can I just use the app to abrade the paint or need to polish first?

[@diydetailofficial]

DIY Detail Gold Standard Polish is best, not enough abrasive in the C6 Ceramics Adhesion Promoter Polish (APP)

[@jeffc6832]

I was intending to apply the trim restore and protect today, but sadly my bottle of All Clean got tipped over and leaked out. I have a surplus of Optimum Power Clean, can I use that in place of All Clean and what dilution? I'm still going to use GSP and DIY Panel Prep as directed.

[@diydetailofficial]

Yes, that’s fine

[@chrisrousos4469]

Question: Would I be removing a ceramic coating if i did a light polish on a Rotary using the Red Jeweling Pad?

[@diydetailofficial]

Yes

[@Dontknowanything327]

Hi ! I have two cars , one that the paint is like a brand new car but, that I want to enhance before I put a ceramic coating on it and, my second car that need a lot of love. I don’t want to buy two polishers so should I be good with a 9 mm DA and the yellow pads for both? And keep in mind that my priority is the one with almost perfect paint

[@diydetailofficial]

Ideally get a longer stroke (21-25mm) and our yellow waffle and our wool pad.

[@Dontknowanything327]

Alright! I’ll do that!! Thanks for the quick reply!! Awesome channel!! Continue your good work

[@techups3082]

i'm getting some micro swirls after i'm done polishing... is that because of unclean pad? or I"m not using enough polish?

[@diydetailofficial]

Dirty pad, too much polish, mismatched polish/pad, and too much pressure are all possible causes.

[@CoolPilot71]

Hi guys, can you provide some insight on the proper steps for removing swirls and light marring on a ceramic coated car? Do I need to strip off the coating and start from scratch? Thank you.

[@diydetailofficial]

Unfortunately yes

[@HoomanR17]

Very helpful video. Did I heard you correctly that there is a benefit in using APP if my goal is to do a 3-8 stack? As a home DIY user not interested in polishing/coating my car too often, how should one weigh the benefit of APP over panel prep specially when in this type of scenario, only a few drops of APP will be used.

[@diydetailofficial]

The C6 Ceramics Adhesion Promoter Polish (APP) will give you a marginal improvement on gloss .

[@HoomanR17]

@@diydetailofficial Thanks.

[@KingRockets]

Can you cut with the wool or gold standard pad and then finish with the red jewel pad all on a palm sander from start to finish? Or is this not advisable?

[@diydetailofficial]

Yes you can

[@mtnmann72]

All clean is a super nice pre wash. I sprayed it on the exterior of my Weber grill and rinsed about 2 minutes after and the pollen/dirt and grease came off easily.

[@diydetailofficial]

Good stuff!

[@jfarm_1311]

It seems that trip is what turns pads black. Would it be best to do the trim last when polishing? And is a stained pad ok to use on another vehicle once it’s clean?

[@diydetailofficial]

Yes, staining is normal, and has no effect on correction.

[@rosmarin2438]

When will you sell the whole line up in bulk quantities? 5gal+

[@diydetailofficial]

No, because of the efficiency of our products and system, most users report that a gallon will outlast their previous suppliers 5 gallons

[@curse6of6me6]

Hahahahaha what dog shit reason. Marketing is why.

[@laxbeach2381]

3:49 that’s an interesting take. Couldn’t using the rinseless be similar to these companies that sale “pad prep” products? Or are those products a different chemistry? It’s does make sense what was said though. A lot of these consumer brands sale some gimmicky products.

[@diydetailofficial]

DIY Detail Rinse Less Wash does a great job. kzbin.info/www/bejne/raTbiJZ5qtijq8ksi=m2oXqnQdNQb7F0Qw

[@patrikkihlman6979]

Hi. Where i live diy we dont have diy unfortunatley but i really likes your videos. I just wondering. If I want to dampen my pad but dont have rinsless is there anything else i can dampen and clean the pad with?

[@diydetailofficial]

Where are you located?

[@patrikkihlman6979]

@@diydetailofficial I live in Sweden. And I now you have sellers in Europe but almost everybody is out of stock of something that I need. Most commonly the claytowel and Iam supposed to polish tomorrow thats why i Wonder of there is any alternetives to dampen the pad. Can you just use water ore some kind of drying aid?

[@diydetailofficial]

If you’re going to be ceramic coating after best to not use a detail spray. You can dampen the pad with water.

[@MrYandain]

I’m putting C6 hydro on my car can I use gold standard polish before APP?

[@diydetailofficial]

Yes

[@bernarddalpe2388]

Can you use a rotary polisher if you have PPF on your car?

[@diydetailofficial]

Yes

[@trd3786]

I just tried ordering products on your website. I am using a residential address not a PO Box but it says you do not deliver to this area. Do you not ship to Hawaii?

[@diydetailofficial]

We do not ship outside of the continental USA. We have a distributor in Hawaii Https://diydetail.com/pages/distributors

[@cherry2036]

When will the iron remover be back in stock?

[@diydetailofficial]

Hopefully tomorrow

[@skrsys]

I was looking forward to the app on wheels discussion you teased.

[@diydetailofficial]

You can hand apply, or use DIY Detail Panel Prep

[@ozs_sanction6732]

What do you do when you have a vehicle with bad swirls and even an aggressive pad with a cutting compound won’t get them out let alone a swirl remover with a less aggressive pad? Done many cars in my time but there’s the occasional one where no matter what process is used the swirls just don’t wanna budge.

[@diydetailofficial]

You leave them. Not everything should be fixed through polishing.

[@ozs_sanction6732]

@@diydetailofficial I thought so, thankyou for the confirmation

[@DonzAutoDetail]

I can't seem to find the DIY Detail Max Gloss Rotary Tool anywhere in Australia

[@diydetailofficial]

Its on the way

[@DonzAutoDetail]

@@diydetailofficial Thanks

[@vicjensik5985]

Does using a 6in pad on a 15mm imped correction quality vs a 5in on a 15mm? Thx

[@diydetailofficial]

Same thing

[@kevind_53]

That was a very interesting one, Thanks!

[@diydetailofficial]

Thank you.

[@GP-xc3ee]

Can I use the jeweling pad with a Random Orbit Palm Sander?

[@NoKingsNoGodsOnlyMan]

Yes

[@diydetailofficial]

Yes

[@YaBoiMilli]

The Milwaukee is 3/32” 2.4mm. Is that suitable for APP?

[@diydetailofficial]

Yes

[@keithcee6378]

Just grabbed my Decon towel, instructions say to break it in on glass. Is that still necessary or what is the actual break in process?

[@mariah.garridor.6997]

The new towels do not need to break on the glass but if you are not sure it will be one of the new ones I would do it just in case... anyway the glass should also be decontaminated.

[@diydetailofficial]

Just use on glass first to be safe

[@musashimusashi1105]

Car is new with only 7k miles on it. I just want to make it glossy before ceramic coating. I think im happy with the condition of the paint. 1. After full decon wash, do i still use gsp then app? Or can i use app directly? 2. Follow-up to #1, Can i use random orbital sander with jewel pad or do i need gold pad?

[@NoKingsNoGodsOnlyMan]

You can use APP with red pad and a sander if you like the paint and don't want to polish it first. APP is a dry wipe btw.

[@diydetailofficial]

If you’re happy with the paint, then C6 Ceramics Adhesion Promoter Polish (APP) is all you need after full decontamination

[@musashimusashi1105]

@@diydetailofficialwill APP add gloss or just prepare the paint to receive the coating?

[@musashimusashi1105]

@@NoKingsNoGodsOnlyManwill APP add gloss or just prepare the paint to receive the coating?

[@musashimusashi1105]

@@diydetailofficialwill i get better result if i use gsp first then app? I think i saw a video where i can put APP directly on top of gsp without wiping it off.

[@NO_OPEC_NO_PROBLEM]

GREAT GREAT GREAT VIDEO guys! Finally some great polishing FAQs sponsored by Yvan. Reminds me of FAQ session with Pan on Ceramics, I rewatch that all the time. I do need a small easy pad cleaner solution, while you’re at it… sell me one of those clear buckets with DIY Detail logo inprinted. “Correction = happens at prison” LOL! I always think is clear coat like your fingernails, you can polish them and make it shiny! Mil gauge is a must, what one do you recommend?

[@diydetailofficial]

The buckets you will find at a local restaurant supply store.

[@danparrett4763]

Bought your water spot remover for water spots on my glass. It did absolutely nothing. Any other suggestions? Thank you

[@diydetailofficial]

After using Water Spot Remover, try polishing. Try the yellow waffle pad first, paired with Gold Standard Polish, if that doesn't move the water spots try our Wool Cutting Pad

[@curse6of6me6]

So buy the water spot remover to then buy 3 more products to do what you are told the first product will do. My god. Lol

[@JLucasDetailing]

Can you use app with a ceramic based wax?

[@diydetailofficial]

Yes

[@patrickkeschl596]

If you ever produce your own Racatac (kneeling creeper) I would buy that too! They are way too expensive.

[@diydetailofficial]

We will soon, but it will be priced similarly. The Racatac is a great investment

[@jasonyantha2660]

Can u properly polish/paint correction with a polisher with bonnets???

[@diydetailofficial]

Yes

[@jasonyantha2660]

@@diydetailofficial any tips or tricks???

[@jasonyantha2660]

@@diydetailofficial which bonnet material for which process?

[@diydetailofficial]

Do a test spot, try different ones to see what works best.

[@gregplant8761]

It would be great if you guys visited the UK to conduct some training

[@diydetailofficial]

Ask your favourite distributor to organize a training

[@larryleerssen2562]

I have personal watercraft in the family can I put a 3in pad on the phendo so I can use it for 2 jobs

[@diydetailofficial]

No, 6 inch only

[@turboboost99]

If I have a question to ask, where do I do that?

[@diydetailofficial]

On clean paint

[@turboboost99]

@@diydetailofficial Sorry, I don't understand your answer. I'm asking how to submit a question for your podcast.

[@JoshPiland]

This was helpful! Thank you gents!!

[@diydetailofficial]

Glad it was helpful!

[@casey9551]

I love detailing my vehicles but my wife thinks I’m crazy but I just love to see the final product

[@diydetailofficial]

Get her involved

[@davidboyce6427]

Nick I’m repairing my tears in my seats using Geist products for rips,tears or holes in my bolsters and seats. My car is 16 years old old. It’s a competitor to Colour Lock.

[@diydetailofficial]

Sounds rewarding

[@cpt_sweettooth]

Tactical Details here. THANK YOU!

[@diydetailofficial]

thanks for watching!

[@DizConnected]

I almost panicked when you started talking about applying C6 APP until you confirmed my Hercules forced rotation polisher was okay for application.

[@diydetailofficial]

Good

[@TheMobileDetailShop1296]

When you had your shops did you do boats.and also are you going to have a 15mm polisher.

[@diydetailofficial]

Yes, and yes.

[@MichaelAbernathy]

5x5x5 for the attempt and shiny scratches after that. I spot reduce via the 5’s method on deeper scratches first and shiny scratches after. I’ve bought too much product for a few years “trying them all” and now to reduce my product before I retire I do freebie enhancements when I can. I’ve done a few dozen over a few years now and will continue to do so until we sell our house and move abroad next year. I will continue to use my own products and time for free as this is MY Therepy. I love to make people’s day. When they see their car after I’m done they can’t believe it. If they scratch it after they are still happy. I’ll do a wash, clay, seal and it shines for them again. I post a lot of my videos here on KZbin of me just having a good time doing this.

[@diydetailofficial]

Excellent, please link your channel

[@MichaelAbernathy]

Thank you for asking. Please remember to not judge a dude doing free enhancements for friends and family unless it’s good judgement 😁. youtube.com/@michaelabernathy?si=iW0k8dqh32cGBnRM

[@diydetailofficial]

You have a new subscriber

[@Duusin]

when do we get the rolling knee-sit chair :D

[@diydetailofficial]

Hopefully September

[@scootytamra]

I wash my car every third week, as i only drive it to appointments and errands. Winters i use rinseless.

[@diydetailofficial]

Thank you.

[@TimothyJohnsonBey]

DIY is an entity that gets it

[@diydetailofficial]

Thank you.

[@barrybinning3849]

Can you get away with a wool pad and jewel pad with the da on slow speed

[@diydetailofficial]

Yes

[@barrybinning3849]

@@diydetailofficial with a 3” with app?

[@diydetailofficial]

Not with C6 Ceramics Adhesion Promoter Polish (APP)

[@MikeKaufman-d7n]

Awesome!

[@diydetailofficial]

Thank you! Cheers!

[@shijushibu-jy5bm]

How to remove glass wiper mark

[@diydetailofficial]

Replace the windscreen

[@neilbenzie3618]

Sitting waiting with a wee dram in the hand ( sorry I mean whiskey 🥃) Scottish lingo 😂

[@diydetailofficial]

Thank you.

[@neilbenzie3618]

Your very welcome and very good podcast full of valuable information 😊, Question when are you coming out with a weather changing machine ? As all it’s done here in north east of Scotland is rain lol . So can’t get c6 hydro applied yet to my Mazda cx60

[@diydetailofficial]

@neilbenzie3618 you only need one hour without rain to apply the coating, or borrow a friends garage or shed for a few hours

[@neilbenzie3618]

@@diydetailofficial I can borrow my mates shed to get the car into ,but it’s the though of driving the car home and getting it dirty after a day spent polishing and coating 😂😂

[@diydetailofficial]

It will wash off

[@Snkrheadzz]

Question? Do I clean my pad after every section just to clarify?

[@andrewkennedy9704]

Yes. Never use a dirty pad on a new section.

[@Snkrheadzz]

Gotcha! TY for this clarification! I appreciate it !

[@diydetailofficial]

Yes, always

[@Smoothblue90]

​@@diydetailofficialThat was my favorite part of the video. Don't put new product on a pad that hasn't been cleaned.

[@1stfrompuertorico568]

Ready

[@diydetailofficial]

Thank you.

[@BackroadsAutoDetail]

did i finally catch an actual live 😲

[@diydetailofficial]

Yes

[@mateuszukasiak7675]

Music is way too loud

[@diydetailofficial]

Just at the beginning? Noted, thank you

[@mateuszukasiak7675]

Yes, cannot focus on whats said

[@Thankyou_3]

If you are professional detailer then use all these advices in this Q&A…..BUT if you are just a weekend warrior then use just elbow grease. Don’t even consider buying a DA or Rotary….think of clear coat like a thin sheet of gold. Once you wear out clear coat it is game over.

[@diydetailofficial]

Machine polishing is quite safe when following our instructions. How to Polish Paint for beginners! #detailing #polishing #paintcorrection #diydetail kzbin.info/www/bejne/mJWsf31jaLKWZrc

[@keithmelling8530]

Is it worth wetsanding factory orange peel on cars a few years old for ultimate finish

[@diydetailofficial]

No