Your PC Can Look Like THIS Now!

Check out the Sharge ICEMAG at bit.ly/SHARGEICEMAG
Check out Acronis Cyber Protect for businesses at
go.acronis.com/LTT
We've seen a lot of 3D printed supports for soft tubing to make it look cleaner, but finding 3D printed hardline was a challenge. So naturally, we decided to try it ourselves. Any guesses as to how long it will last under pressure?
Discuss on the forum: linustechtips.com/topic/15704...
Buy an EinScan Pro 2X V2 3D Scanner: geni.us/tcAJj
Buy AESUB Blue Scanning Spray: geni.us/Q1REG
Buy Self Glowing UV Resin Colorant: geni.us/C5KMh3
Buy Monocure 3D TUFF Resin: geni.us/BdtSX (At SPOOL3D Canada: lmg.gg/xZkNF )
Buy a Elegoo Saturn 4 Ultra 3D Printer: lmg.gg/11DPq
Purchases made through some store links may provide some compensation to Linus Media Group.
► GET MERCH: lttstore.com
► GET EXCLUSIVE CONTENT ON FLOATPLANE: lmg.gg/lttfloatplane
► SPONSORS, AFFILIATES, AND PARTNERS: lmg.gg/partners
► EQUIPMENT WE USE TO FILM LTT: lmg.gg/LTTEquipment
► OUR WAN PODCAST GEAR: lmg.gg/wanset
FOLLOW US
---------------------------------------------------
Twitter: / linustech
Facebook: / linustech
Instagram: / linustech
TikTok: / linustech
Twitch: / linustech
MUSIC CREDIT
---------------------------------------------------
Intro: Laszlo - Supernova
Video Link: • [Electro] - Laszlo - S...
iTunes Download Link: itunes.apple.com/us/album/sup...
Artist Link: / laszlomusic
Outro: Approaching Nirvana - Sugar High
Video Link: • Sugar High - Approachi...
Listen on Spotify: spoti.fi/UxWkUw
Artist Link: / approachingnirvana
Intro animation by MBarek Abdelwassaa / mbarek_abdel
Monitor And Keyboard by vadimmihalkevich / CC BY 4.0 geni.us/PgGWp
Mechanical RGB Keyboard by BigBrotherECE / CC BY 4.0 geni.us/mj6pHk4
Mouse Gamer free Model By Oscar Creativo / CC BY 4.0 geni.us/Ps3XfE
CHAPTERS
---------------------------------------------------
0:00 Intro
2:09 The Process
3:10 The Problems
4:15 The Solution
7:15 Linus and Alex React
10:06 Conclusion
13:07 Outro

[@LinusTechTips]

Thanks for pointing out the issue with the Sharge sponsor read, we're removing that short portion from this video and we'll reshoot it for future integrations.

[@Mrbigcheesecompany]

Wow 1h ago

[@shellderp]

is this a trick to make me watch the ad spot

[@jamesch7428]

Gaming subreddit toxic, nice.😂

[@donc-m4900]

Does the ECC all have AdBlock? (I know it's not a yt ad.)

[@easiers]

There goes the 100,000mAh dream 😔

[@Jourei_]

3D print a case. Make it be the tubing and reservoir.

[@GoldMike_]

That is an incredible idea but would be hella complex to make

[@barnett25]

Metal 3d print the case so it can be the tubing, reservoir, and the radiator.

[@asicdathens]

They already printed a case. Nice one

[@wilppuse]

thats actually genious

[@wick174]

That case already exists. Uh. I don't know the name. I saw it on one of the Asian pc build channels

[@Kytetiger]

remember kids, the difference between doing something stupid and doing something for science is that for science you take notes of your results (and shout "FOR SCIENCE!!" )

[@alexdavis9324]

You also have to share your findings(notes) with other people

[@Renegade605]

"The difference between science and screwing around is writing it down." -Adam Savage

[@Physicus9]

@@Renegade605I came here to quote this exactly... thank you! :)

[@TheHmm43]

Gave me nostalgic Bill Nye vibes too.

[@NothingXemnas]

Empirical testing and knowledge is the backbone of the scientific method, afterall. There is no science behind the scientific method; it is just a structured/formalized format for messing about.

[@aaronrdaniels]

Honestly one of the coolest videos LTT has posted in a while. Please go down this rabbit hole. Im sure more will be uncovered of how viable this might actually be

[@austinclark3495]

This!

[@ryantakahashi9130]

There was a recent post in the r/SFFPC subreddit where a user 3D printed molds instead. Then used regular hardline tubing and used heat to fit them to the mold. Was able to achieve something super complex but without having to go resin and print the full tubes. It would work great for an SI when they have fixed configurations, they could just premake all the tube runs with ease.

[@boxhead6177]

Custom Scientific Glass Blowing has a similar process where they use regular tubing and stock glass to form custom pieces for laboratory and manufacturing use which has to be of a high standard for professional use to withstand heat and pressure tolerances fit for purpose. Or if you think of it as a prototyping route, make a model test fit... and then go completely over the top and follow an artistic route glass blower/sculpter to make the final product. The looks you could pull off like go full glass crazy straw, mad-scientist labratory glass kit, abstract art like a glass knot or klein bottle, or waterflow sculptures.

[@sykesmcenzie]

If you don't want to resin print you can fdm print casings to hold softline tubing, you just thread the tubing through the printed casing and you have your shaped tubing

[@slothnium]

Open loop splashing water on a tower heatsink would be hilarious. You'll probably have to top it off every week due to evaporation, but it'll double as a humidifier.

[@toddblankenship7164]

Auto refill with a toilet filler thing like recently did on the server cooler thing

[@jsVfPe3]

@@toddblankenship7164 How about a PC that uses your home's toilet bowl as the reservoir?

[@FrietjeOorlog]

Ah yes, the algae breeder 9000.

[@Zolo4213]

Have it be refilled by a Swipe+ bidet on a RasPi with a level sensor.

[@noth606]

Every week? Eh, if the capacity is like common loops, several times a day to once every hour or so running an i9 with load on it. You'd have to demineralize the loop once or twice a day or your pump won't make a full day without seizing. Realistically you'd have to automate refill based on some level point or you'll cook stuff or have auto shutdown due to thermal alarm constantly. Think of it this way, would you want a 100w+ air humidifier?

[@caddyguy5369]

I didn't realize there was a scanning spray that cleaned up with sublimation. I was only aware of ones that required manual cleaning. Going to have to give it a try.

[@Sirotaca]

I use it all the time in my job. It can take quite a while to fully sublimate, but even if you end up having to clean some of it off manually, it's still a lot less messy than dealing with the non-sublimating stuff.

[@ians7184]

I have never even heard of scanning spray before and even I was super excited about it sublimating to remove itself

[@charliebridgman9144]

It works really well but it’s quite expensive. I usually just use foot spray unless it’s a very complex component

[@shounaksarkar5917]

I am kind of glad that they brought the intro back. Honestly I feel like linus should do more off script stuff. Makes the video more genuine and spontaneous

[@NexGen-3D]

About time you guys tried this, I did this years back with my Anycubic Photon, only did a few difficult bends, but 4 yrs later they are still in daily use.

[@tomjansen629]

You are mad

[@smashed_penguin]

He is mad scientist

[@gen8901]

Mald*

[@AndyIsHereBoi]

Bald too

[@LordKosmux]

Maid

[@Sol4rOnYt]

Yep

[@pancakeforge]

Ah yes, the Dreamcast pc

[@TheHammerGuy94]

Mosquito coil?

[@ernieoporto1111]

This was my first thought. Glad someone else came to the same conclusion!

[@thehorsefromGOTs8]

bah, I didn't like it until this comment now I have to have it.

[@datoaster4991]

I see you a man of culture as well

[@Kawayolnyo]

Dreamcast IS the PC, since it's running on Windows CE, has a keyboard and mouse, and can go online (even still, due to fan-hosted dedicated servers).

[@RadikAlice]

Saw the snail spiral, the color and genuinely thought "Dreamcast?"

[@error-uq3mf]

I 100% hope you do have Alex do that. It sounds awesome!

[@bradybalaban]

"You're a mad man" -Someone to Linus probably

[@labhamjain3915]

@tomjansen629 said.

[@LordKosmux]

Linus to Linus*

[@KamielDV2]

Probably all his employees on a regular basis

[@braydonpugs1271]

Me to linus

[@Tape30]

He did it. He actually did it. The absolute madman.

[@gnarr]

Yeah, yeah, but your scientists were so preoccupied with whether or not they could that they didn't stop to think if they should.

[@Weepsy_]

Can't wait to see Linus on the r/madlads

[@fountaingoat6802]

This is cool. If you have a small resin printer, you could conceivably print separate tube sections with each end having a male/female end that fit together and glued with resin. Each section can be oriented for best quality.

[@thundervr8441]

Man I have been 3d printing for nearly 6 years now and this is very cool tbh I’m very surprised no one thought of this before but man you guys did a great job keep up the brilliant work guys your all the best.

[@aadityakhetwani6314]

The orange spiral loop looks like a JALEBI.

[@_D_P_]

Never heard of them. Looks yummy.

[@ark_knight]

@@_D_P_ if you like sweets and sugar syrup, you will be at home.

[@CyberNacho]

Need Linus singing jalebi baby on an update

[@ark_knight]

@@CyberNacho no

[@vivindeenathayalan9975]

Came to the comments section looking for someone to say this and found out that its the second liked comment

[@mwurman]

Okay I will admit that is pretty awesome...been watching a ton of custom loop videos since my next build I want to finally do my first hard line...and this is just cool!

[@jimmysgameclips]

I didn't know scanning spray just fades away!! That is gonna change a lot for me. Wonderful!

[@bighammer3464]

Linus took off his metal challenge gauntlet, slapped Charles Harwood across the face, took his puppy, and stomped over his flower garden and said this isn’t a challenge. 😂😂😂

[@YouareGodsAnointed]

wow

[@maxi2702]

Saying that something isn't a challenge make it a challenge.

[@Justethann_]

“I paid for the whole tube, i must use the whole tube” ahh cooling tube

[@KokoroKatsura]

A N I M E N I M E

[@Solomon_Pett]

THE INTRO IS BACK YESSSSSSSS

[@NotAnAmerican]

literally all i like to see in an ltt video

[@viyer00]

This is sick. Some of your best content yet.

[@TrigTrig]

UV reactive resin mixed with classic neon signage bends would look amazing on a cyberpunk style build

[@Ikxi]

Damn you promised an NDH-15 waterfall cooler Will wait to see that!

[@dinfernosev]

As a user of shinning 3Ds scanners! It’s great to see this company get some exposure! Nice

[@RylTheValstrax]

Resin toxicity varies dramatically depending on the formulation - and there are low toxicity formulations that are dramatically safer to use, but be aware that to achieve low toxicity tradeoffs in cost, mechanical (ex, tensile strength, glass transition temp), printable (viscosity, curing wavelengths, curing time, etc), optical (coloration, UV stabilization, opacity), or chemical (water sensitivity, ozone sensitivity, etc) must be made, so do your research on what you need to make the print actually function in its intended role and its compatibility with printers/curing lights/etc. I personally work with a very low toxicity PMMA/acrylic formulation for most of what I do personally, but while its got pretty decent mechanical and cost properties, it does make notable tradeoffs in chemical (high water sensitivity causing hydrolysis of the plastic before being fully cured), optical (low clarity on "transparent"/translucent prints), and printable (high viscosity) properties

[@ansonmoyer2600]

"im confident enought to risk my own 4080" *nudges the pile of 10 behind the table

[@tobiasjennerjahn8659]

This is the kind of shit that I love ltt for. It’s crazy enough that I’d never try it first, but now that they’ve done it I’m kind of intrigued to try. Great video 👍

[@JohnSmithYoutube]

I can totally imagine some viewers doing this at some point, you can use your phone to scan objects and there's plenty of affordable home gamer SLA printers out there. Love this kind of stuff!

[@tuttocrafting]

I have 3d printed some mold for a custom loop I did for a friend it required a tube with 4 precise bends and to make it square I created a series of dies to properly bend the PMMA pipes.

[@Dmanjack]

This is a tech tips video , so glad you found alex his video's are always fun.

[@JupiterGuy1]

12:37 umm this should be 10,000mAh rather than the 100,000mAh stated in the video... (If I'm not mistaken)

[@staffie85]

Glad I wasn’t the only one who spotted the Engineer’s numerical disabilities

[@donc-m4900]

Don't you have to be < 99,999 mAh to be on a plane?

[@JupiterGuy1]

@@donc-m4900 yea that's the legal limit, also on the powerbank's website it says 10,000mah so he said the wrong number

[@JupiterGuy1]

@@staffie85 (he's a writer not a engineer)

[@mechatr0nix]

@@donc-m4900 The limit is 100Wh. For a 14.4V laptop battery, that would be 7000mAh

[@manojsahu-hr9qe]

*Dreamcast startup intensifies*

[@mme725]

Thank you, I too was thinking Dreamcast lol 🍥

[@GimpyDingo]

Mashes the start button.

[@VitalVampyr]

Looks more like a resistive heated stovetop to me.

[@802Garage]

You could also 3D print the reservoir, distribution block, and fittings with O-ring grooves. Plus you could vary the width of tubes, adapt between sizes without fittings, and make structural or decorative components that are part of the loop. Even FDM prints can be water tight, though it depends on material and print settings.

[@shebyjlo]

Thaaanks for the link of sharge. I was looking for something like that 👍👍👍 already order it

[@oliviaradecki142]

I'm not prone to seizures myself but I really appreciate the approach taken to the warning here because they give ample time in the warning and indicate when its okay to look again. No one ever indicated when its okay to look again which just makes no sense.

[@TheSkcube]

It did say it will be okay to resume watching when you hear a ding, and there was a ding. Though I would prefer a noise similar to the warring one but a different tone.

[@tronosgamingwizard]

12:36 - 12:39 "100,000mAh battery capacity" Hey Alex, you've got some info the printer doesn't have? Cause it printed 10,000mAh on the powerbank (as shown at 12:44)...

[@edithocastillojr.9249]

Yo! Linus, this is one of the reason why I keep watching every video release you guys have.. This surely will change a lot for Hard line tubing a computer, and yeah.. having a waterfall as part of the water cooling would be an awesome idea, checking the effectivity for thermal I'm pretty sure that will be a game changer. The concept is phenomenal and the applications if proven effective for thermal cooling, has tons of potential. ~Im watching here all the way from PH.

[@ThingsIdRatherBeDoing]

I've never water cooled anything and don't know anything about it outside what I see on this channel, and this is still a super cool video.

[@nidhisingla7880]

Its insane that this doesn't leak like hell

[@hed420]

Oh it will. I thought about doing this almost 6 years ago. Turns out that resin prints dissolve in water. Hope that the resin they used resolves this issue.

[@Konigstiger]

@@hed420 There are plenty of resins that aren't water soluble. In fact, can you guess what kind of technique dentists use nowadays? Surprise! Resin 3D printing.

[@MaethorDerien]

Well resin has been known to be water tight for years. Most of the resins for hobby use don't stand up well in water. That said there are plenty of ones that are water safe. Some of the new ones that you can thermal cure on top of the UV cure so you don't end up with the uncured internal resin issues although it is absurdly expensive and I don't think I have seen clear.

[@JohnSmithYoutube]

​​@@Konigstigerwhilst resin is very good it does have its limits. I've got both mercury amalgam and the new resin/ceramic composite fillings, and the amalgam one hasn't changed in over a decade, still even looks like shiny, freshly cut metal. The resin one is starting to degrade and the dentist says it'll probably need redoing, or require a veneer, within a few years. They can only usually guarantee them for 10 years, amalgam lasts until death 😂

[@Waldohasaskit210]

You can add a bit of adjustability into the tube as well by adding extra bends that allow some 'squishiness' in certain directions, depending on the rigidity of the plastic used.

[@DarthPoyner]

The resin is usually very rigid. And putting more bends in it than necessary could lower your efficient fluid movement. You can't just heat bend it like the plastic or the glass.

[@conorstewart2214]

You absolutely can use FDM printing to produce watertight objects, I have done it myself using PETG and even in vase mode (where the wall is just a single continuous extrusion). You just need to have well tuned settings. PLA isn't good for watertight objects but most other materials are absolutely fine. Yes prints have layers but if your settings are right then the layers should be fused enough that there isn't any gap.

[@ztonner5166]

I’ve been trying to figure out a good way to do all the tubes for water cooling a computer and this literally is my answer. I already know how to do all of this and it should be easy for me. Thanks for being guinea pigs for me.

[@imperialdra-mon5907]

i miss the beard

[@deleted_handle]

don't we all 😞

[@Metal_Maxine]

He says it's staying off until he's finished painting his motorcycle pink.

[@Bupcis7]

I don't.

[@watercannonscollaboration2281]

You know who is also as mad? Our sponsor, Acronis! Okay jokes aside this is really cool. It’s even done in a SSUPD case with the Barrow combined pump/reservoir/block

[@ryanpiggs6566]

Thank you for this video! I was thinking of this idea.

[@johnflapper]

This could be combined with that Humble PC and look absolutely incredible

[@sphygo]

Scanning the case is certainly an option, but bending a wire to the run you want and then measuring that wire would be a heck of a lot easier. And cheaper. Still a cool project though

[@201bob]

maybe watch the video next time lol they literally said you could measure and that 3d scanning was overkill

[@emanggitulah4319]

Definitely overkill... They had to justify the purchase of the 10k 3d scanner

[@demoninveins]

​@@emanggitulah4319Yeah, that's kinda part of the channels whole thing. Using sub-zero cooling is also overkill, yet they did it

[@emanggitulah4319]

@@demoninveins sure it is.... It's like the question why does the dog lick his balls?

[@KokoroKatsura]

a n i m e n i m e

[@deltacx1059]

4:04 means your settings are not correct, although it's less relevant because you can coat the stuff in epoxy. I printed a part in petg for a hydrolic tank and it is indeed water tight. There is a alternative where you fill the part with sand and put it in a box of packed sand then heat it enough to somewhat melt which will also seal the print.

[@the_undead]

Maybe on a high-end printer I would agree with you, but on a lot of the extremely low quality low-cost consumer models, I would not expect those prints to be water tight. And yes, there are solutions for that problem but coding an entire tube in epoxy at that point, why don't you just use traditional hardline methods because it's impressive enough for way less manual labor

[@deltacx1059]

@@the_undead because you can do shapes that are impossible for a normal tube. Also I do this crap on my used cr10 max.

[@xXlURMOMlXx]

​@@the_undeadI made water tight stuff on an ender 3 lol

[@the_undead]

@@xXlURMOMlXx but can you reliably do that with relatively thin tubes? And also can you do that from printer to printer because something that you need to understand Is these cheap consumer models? Do not have high tolerances so you could get one that's capable of amazing precision and you can get another one that couldn't print watertight tubes to save its life, especially because a lot of these companies do not care about the tolerances they're they are just trying to sell you really cheap garbage

[@xXlURMOMlXx]

@@the_undead that's a skill issue. The printers are cheap because you have to build them and calibrate it yourself. It's a pita but you get what you pay for. Spend a little more for a bambu and it's a non issue

[@-B.H.]

It's pretty fun in seeing how far 3D printing continues to progress!

[@diegon7781]

Love this type of videos, it inspires me to go and try that on my machine xD

[@CerebroJD]

It looks like a stove element hahaha i love it!

[@unknowndragon2831]

"You're definetly a mad man" -Someone who watched all linus dropping stuff scenes

[@jojobobbubble5688]

I would never do this myself... But this is soooo frickin cool man!!! Also, please have Alex do the video you mentioned. Sounds super cool too!!

[@Bernatchly]

I just appreciate the fact you're using a Meshlicious case! (I think...). Love mine a lot, despite the trickery in routing things!

[@LichtVoltere]

Linus do you prefer bagels or croissants ?

[@Atomy111]

i like tortoises

[@the_undead]

Food

[@aravindvissamsetty]

12:35 That power bank sure doesn't look like it does 100k mAH

[@aaronmdjones]

I don't think I've ever seen someone write kilo milli before. They're literally opposites; just write 100 Ah.

[@fkosh2]

​@@aaronmdjonesbruh. Different measurements. They don't cancel each other out.

[@pitecusH]

@@fkosh2 yeah, they do. But 100 Ah is quite large even for a car battery. It must be 10.

[@aaronmdjones]

@@fkosh2 They do cancel eachother out; please learn the metric system. Kilo (k) means thousand, Milli (m) means thousandth. 1000 * 1/1000 = 1.

[@Syddy_]

this is a great idea for creative ideas with your tubing

[@ForeverSinz]

High quality content as always!

[@-Jozef]

He’s only mad without the beard

[@JupiterGuy1]

Printed 3D PC when?

[@donc-m4900]

What's wrong with the cardboard PC?

[@VitalVampyr]

They already made a 3D printed computer case.

[@JupiterGuy1]

@@VitalVampyr but not a fully 3d printed one idk maybe add 3d printed screws, GPU riser water-cooling blocks (and using the stuff in this video) + 3d printed monitor stand mouse and keyboard

[@JupiterGuy1]

I want to download a PC

[@ElectronStarCollapse]

1 out of 10 of these I own (B17 Bomber). This definitely gives me quite a few ideas for games to hunt.

[@3lbsObacon]

This is one of the only times I was ahead of the game with one of your sponsors. We use Acronis for a number of our IT needs and it has definitely made my job a crap ton easier. It's also super affordable compared to anything close to a competitor.

[@4MB1T1OUS]

Linus- I'm not a mad man ❌ Also Linus- Creates the weirdest PC cooling known to mankind✅

[@christianlaney9670]

5:51 if you guys didn’t know why he suggested using uv paint it’s because if you watch one of his older videos he shows off his old pcs and one of those pcs had custom water cooling and uv reactive paint and a crap ton of I’ve lights. I just wanted to point this out because that is really cool that he still to this day loved uv pcs

[@chemicalhorre]

I want to try and build custom distroplates with this idea. Finding one for each case is insane, but with this, you could beef it up and counter sink the screw areas for the fittings.

[@eagledude]

one of my favorite vids in a while

[@DarkKitarist]

Linus is legit good at front of the camera... Like he makes me sooo invested in the video...

[@DarkKitarist]

It's like he's talking to me specifically not just talking at the camera...

[@CannaKitty]

He talks like an overproduced, hyped up kids presenter 😂😂 you're joking

[@mycelia_ow]

He does have 16 years of experience doing that

[@CannaKitty]

@@mycelia_ow nah, he never used to act like he's jacked up 😂 been watching him be consumed by corporate for about a decade lol

[@the_undead]

​@@CannaKittydid you watch all the way through with the video?

[@kazi1]

Damn

[@CreativeNameOfRX]

first comment

[@b0Stark]

I actually have an Acronis True Image license. Sure, it's for the 2018 version, but I've upgraded it once before that, and it saved my behind more than once.

[@walterwhite415]

This opens a lot of opportunities! Why even have tubes, when you can have any shape? Why not build in additional little coolers at places where you have additional space? Why not build in LED and go crazy on the material, to create something really funky? You could really build individual custom PC and you could try out cooling solutions that have not been done before.

[@syazwanirfan7142]

6:20 GYATTTTTT

[@Ila43Hernandez]

Tube clear that's pretty cool. You got a fan out of me.

[@robertgrant6698]

3d print the fittings as well. Also square OD tubing with a circular ID works best

[@loganfoster8681]

First mod video I've seen in a while where i actually have most of the equipment. Really appreciate the link to a good scanning spray. I've been looking for one for my einstar for a long time and haven't been willing to buy and test multiple. One slight correction i feel i should make to the printing part of the video is pla is non-toxic and generally considered safe to be around while its being melted without an enclosure. Its ABS and especially resien printing fumes that are dangerous to breathe.

[@Jsteri]

That is super cool. What a time to be alive really it is.

[@cppctek]

This is awesome ❤ I could use this on my water cooled rog ally project

[@pesoen]

one thing i would love to see now, is a small reservoir built into the tube(so for instance the spiral could be filled out, and used as a reservoir) and it could make water cooling a tiny form factor pc better, since you can fit the tubes in where there is space, and make a small reservoir where there is space for it, and even a fill cap located in a convenient spot, and a drain port as well.

[@thetimecapsule1680]

Yes! Make alex do more sketchy cooling projects, always a favorite of mine!

[@G3ML1NGZ]

if you clearcoat the resin print you can achieve translucency. I have lightly wetsanded some resin prints, clearcoated them and ended up with parts clear enough to easily read text through. Resin prints can continue to cure in sunlight and end up cracking so a UV clearcoat is a nice way to mitigate that

[@Klaevin]

We didn't use this brand, but I used 3D scanning during my studies. We then cleaned up the model using CATIA V5. This mostly taught me how to modify STL files I download, using a Linux Iso of CATIA V5. But hey, it was fun

[@Derived_One]

In case you have not tried it, white PLA/PETG is great for LED diffusion as well.

[@PatrikHlebecStor]

Amazing concept

[@Lianpe98]

2016 Linus is back (I haven't watched ltt in a while but the white coat and camera angle are rather nostalgic)

[@liftedplane]

I use that same case for my office pc, I kind of want to do this to it now.

[@benjawiBen]

Remember that old multi-coloured pipes screensaver? You could literally make that into a case now... love it. Also kinda want to see it

[@Xjere]

I've printed a PLA showerhead without any leaks, so theoretically You could make hard tubing using PETG, but it would take some serious fine tuning to keep the walls small and not cause micro-leaks.

[@sebastiangreen8369]

Lamina flow idea is awesome

[@4RILDIGITAL]

Watching the 3D printed tubing in action felt like witnessing the future. The possibilities this opens up are insane.

[@TheRealNanoz]

7:25 yeah Charles 😂

[@Enazel]

Very interesting experiment, and look forward to seeing where it goes. :)

[@chasr34]

if you do have trouble making PLA water tight, you can also change the settings to completely infill the model, and also make the extruder hotter to meld the layers together far better, ive made a water fountain with PLA and was able to keep it water tight just with this trick

[@thorium9190]

Recent iPhones have LiDAR sensors that you can use to generate 3D models with apps like Polycam. It can be a lot better if the app is more refined.

[@AugmentedPixel]

In my state we can print bottom receivers of pistols with resin printers using engineering resin as long as it isn’t sold and it’s so much stronger than you would think

[@user-lx5oi1lj3c]

Best video in a while love it

[@aeonspast]

This is super cool but the GENUINE excitement just makes it all the cooler. Can't wait for the waterfall cooled PC.

[@Teh-Stig]

The crazy thing is I have all the tools needed for this craziness at home. And went through the same process to redesign my 3D printer internals recently (though with $2 dry shampoo rather than $40 Aesub). Scanners are cheap now too if you don't need an Einscan.

[@MisterSixty]

Dear Linus, Bless your heart ☺️. "What are *'we'* going to think of next!" Alex sighs. 😂😂😂 Thank you for the video!

[@Secretlycat31]

This is a really cool idea