You've Never Seen This Before, Great Idea PC817

[@JD-kg3mx]

This is great! When I was much younger and back in the day, (way back) I used to troubleshoot CRT's, stereos, radios, etc., then moved to PC's especially the old 286 CPU, MS DOS machines. The most fun I used to have was repairing many of the "suite case" PC's (Compac's). I never got tired of watching what I repaired start up and run. I remember my old soldering lessons and always got a kick out of LEDs, even made gadgets with blinking Leds inside of a composite plastic case, stuck an antenna on it as a fake security device. Moved on to listening circuits (9-volt battery powered), got into antenna tech, etc. Electronics are a great hobby.

[@ГеннадийГлухов-д8ъ]

Дурдом!!!

[@rubenscorreamoreira8891]

Quem vai pagar o meu tempo e esse comentário?

[@garbo8962]

Was taught 60 years ago to make sure a joint is mechanical bound before soldering. This person makes his method look easy. My old hands are no longer steady enough to attempt such soldering. Still have my 100/140 Watt Weller soldering gun and two pencil soldering irons.

[@KalatSaar]

it looks easy .. but only a couple of Joints are solderd .. the rest is only "hot glued" !!

[@clarencegreen3071]

I have a Weller 8200 that's about 55 years old. I still use it on a regular basis. But, the lamp bulb burned out. Dang!

[@rzmiscera]

Why? Blinky winky could be good for making sci phi movies.

[@mickgibson370]

I still have my 100/200 watt Weller soldering iron! Old tube radios and TVs, had to had own with enough watts to solder on the steel frame! Pencils where replaced every 6 months!

[@JoséAntonioRossetto-c8n]

Quer vender sua pistola de solda Weller? Brasil.

[@т2ю]

Почитал отзывы, дело не в супер мультивибраторе !!! Дело в том, что человек сделал красивую поделку, все показал, и теперь начинающий радиолюбитель сможет это с легкостью повторить !!! Спасибо, молодец !!!

[@AVadim]

Другой вопрос, зачем? Ну спаял, посмотрел 2 минуты и забросил в дальний ящик или разобрал? Вот я для своей собаки ещё примерно в 1991 делал мигалку на ошейник, чтобы в темноте её было видно, на совковых аккумулятора и далеко не супер-ярких светодиодах. Использовал КР1006ВИ1. А сейчас мигалки уже с современными яркими светодиодами доступны для покупки.

[@Владимир-ч4м4ч]

Начинающие сейчас Ардуино балуются, причем на беспаечных макетных платах. Здесь ни описания, ни схемы нет - какой интерес начинающих к этой поделке?

[@АндрейМилованов-у9у]

@@AVadim чОткий пёс у тебя был в ""святые 90е". Бабло хоть поднять он успел с этим ошейником?

[@liftConnect]

Тоже смотрел и думал, что что то интересное будет. А тут бесполезная мигалка и зря потраченное время.

[@AVadim]

@@liftConnect более интересно было бы, если бы автор показал, как изменится характер мигания при изменении ёмкостей конденсаторов и резистора.

[@luisr.3855]

oh man ... I miss the days when I would spend hours troubleshooting and repairing. I still find myself opening up discarded electronics and collecting components. I know its a sickness. Love this I will be looking for more

[@СергейАндреевич-у8ь]

WELL... THAT *Z LIFE HUCK NEW YEAR LIGHTZ.... China - Turkish...

[@Mars-j8q5y]

А ты в курсе, что так ты помогаешь Природе, так как выброшенная электроника не загрязняет Природу, плюс получаешь Бесплатные оригинальные радиодетали, а не левак с Алиэкспресс.

[@sibrezerv9785]

Мультивибратор, помню собирал такие на МП25 лет 40 назад

[@russuoctavian8568]

Причём, можно было задавать частоту, при помощи подстроечных резисторов! Правда нагрузкой служили лампочки накаливания на 3,5в., а для звуковых мультивибраторах - наушники или ГДШ-0,1, (тут меняли параметры кондёров и резаков). Хм.., - на таком звуковом, сделал на базе "датчика дождя" из журнала "ЮТ" (Юный Техник), - для новорождённой дочки, (в 90-м) - "Датчик смены пелёнок" ! 😆 А, при помощи сборного переговорного устройства из магазина "Сделай Сам" - слышала вся семья, когда присупать к процедуре..! (И опрелостей не было, впрочем, как "радио-нянь" - (они потом появились) и памперсов...)😆😅🤣 Также, слышали, когда дочка просыпалась и плакала. (Жили в частном доме и территория с летней кухней, беседкой). Желаю мира всем!

[@alexanderkislov3129]

Ха, я то же самое написал - мультивибратор, два любых транзисторов и два резистора всего!

[@ragevanych]

Детство...

[@СтудіяЛесь]

@@alexanderkislov3129 І конденсатори треба.

[@RegisMichelLeclerc]

at 3:52 it says "220uH", which would be an inductor, but it's a 220uF, a capacitor.

[@appinventor7740]

Right !!!!

[@randyaivaz3356]

Could use a BC 547 or a 555 Timer, lot less parts. Good Bends, Good Soldering.

[@darrennew8211]

I miss the days when there were stores around where you could go in and buy parts like this in the ones and fives quantities.

[@a.karley4672]

The "high street" company where I used to do this - about 200m from where I now live - went bust 6 or 7 years ago. Not enough custom or customers. Sad.

[@MrJay_White]

all on ebay now

[@SpikesStudio3]

In Australia, we had "Dick Smiths" he was an engineer who got really rich and gave back to the community. Could get every part you would need. 👍

[@switchjim]

I went to Radio Shack, back when it was all about these parts and a free flashlight or free battery each month ... LM3909 is the unforgettable integrated circuit I adored

[@scott.koopmann]

Check out Micro Center. They only have 26 locations in the US, but if you live near one you may want to stop in. The one near me made Radio Shack look like...a shack.

[@wolfman7393]

Not knowing a lot about simple electronics, I find these small builds fun to watch..

[@ixwillxeatxurxbabies]

It's a good way to learn about electronics by watching these small builds, though it's a little more helpful with narration of what and why they're doing things...

[@alexanderkislov3129]

В итоге получился обычный мультивибратор, как реле поворотников автомобиля. Но зачем-то слишком переусложнëнный. Намного проще сделать то же самое на двух абсолютно любых транзисторах. Там и паять меньше - три ноги вместо четырёх. И деталей меньше - всего два резистора, два транзистора и два таких же конденсатора. Светодиоды - в цепь коллекторов.

[@СашкаТвёрдый-й2ь]

Санёк! им нашу школу не понять!!!! эти обезьяны радуются всему, что у них в голове не укладывается! для них это ЧУДО-ЧУДНОЕ!!!

[@НиколайСоркин-ы3п]

вообще не мультивибратор,скорее генератор случайных импульсов...мигает не синхронно

[@lookerona]

@@НиколайСоркин-ы3п Не синхронно потому что резисторы в плечах разные!

[@felixcotov1435]

​@@НиколайСоркин-ы3пмулььивибратор. С оптической обратной связью . Токи светодиодов разные

[@Den4ik_1981]

@alexanderkislov3129 А в итоге мы потратили даром 6 минут драгоценной жизни!

[@INO_BETTER]

We used to build TUBE circuits like this on a desk in High School ! Oh the high voltage shock!

[@averageguy7136]

The best part of this video Is the skillful soldering. Otherwise the blinking circuits by themselves are fairly boring.

[@LittleXtra]

Soldering was not great either.

[@53-herbie39]

Sorry, but to produce a multivibrator its not necessary to use two optocouplers. 2x NPN-Transistors, also the LEDs u used and some resistors with 2x Caps do the same job. And the unit Caps do use is not H (Henry) but F (Farad, µF)... But perfect bendings and also soldering is really good. You use a really good soldering tin.

[@DikiyUgar]

Ага двы штук 3107 и 3102. Для м в вполне хорошо.

[@NathanHassall]

I made one of these for my son and we are on better terms now.

[@СанекСанечкин-р6ч]

Да,все верно. Моя жизнь после просмотра видео разделилась на до и после.

[@karhukivi]

Interesting use of optocouplers to make a flip-flop - thanks!

[@ALEFILES]

Minute 03:53 Is 220 uf NO "220 uH" There are capacitors, no inductors... Greetings from Argentina❤

[@umitsayman]

Sure. Sorry for mistyping. (on behalf of Zafer)

[@ALEFILES]

@@umitsayman No problem! we all help each other! Greetings from Argentina!

[@paulcohen1555]

Has anyone replicated the circuit with success?

[@livingdeadbtu]

Stil got it!!! as soon as I saw you were making a pump circuit I knew what it was going to do!!! Awesome movie set flashy light console thing! Christmas lights, attention getters on a sign, etc.

[@ozboomer_au]

F'me, the most interesting aspect is that the frequency of each 'half' is slightly different, meaning the pairs of double-LEDs will slowly go in and out of phase... 😊

[@GregJedi]

I enjoyed watching this (at the normal viewing speed) remarkable demonstration on how to solder LEDs in sequence to obtain a strobing light effect. And besides there is a lot of soldering and the correct diods and what have to put in place. I am no electrician, so i need all the help to achieve what you have demonstrated in this. I am sure there are people like me interested in how you achieveed this.

[@damatron3509]

Moi quand j'étais adolescent je montais mes circuit sur des clous monté sur une planche de bois. Ça me rappelle cette époque.

[@góticoesoterico666]

Me gusta distraerme con vídeos de electrónica 🤘🏼🍷🕯️⚰️🦇

[@davethurston753]

Very steady hands!!!

[@jpsholland]

I can remember TV's were soldered together like this in the pre- PCB era.

[@tof3275]

As a retired Electro-Mechanical Engineer ( H N D ) we never went down as far as components more the heavy stuff, three phase etc. So after watching "You've Never Seen This Before, Great Idea PC817" I have now subcribed. 👍👍👍 Keep up the good work.😎☝

[@Slimecraftgaming1]

Good job, friend 👍

[@PinePondCTDevilsHopyard-fy3hj]

Zafer works all the time thinking up new simple ideas to keep us hooked on his KZbin channel! Great job!

[@MoppedGhost]

It's not a multivibrator. It is two independent, unrelated oscillators. As far as I understand, the generation is due to charging and discharging of the capacitor. The potential on the emitter of the transistor changes, and this opens and closes the transistor, despite the fact that the optocoupler LED is constantly emitting. BRAVO ! Это не мультивибратор. Это два независимых, никак не связанных между собой генератора. Насколько я понимаю, генерация происходит за счёт заряда и разряда конденсатора. Меняется потенциал на эмиттере транзистора, и это открывает и закрывает транзистор, не смотря на то, что светодиод оптопары постоянно излучает. БРАВО !

[@jozefnovak7750]

Super! Thank you very much! Great idea!

[@АликЮсупов-к8е]

Это я ещё в школе делал, обычный мультивибратор на двух транзистороах мп 42

[@taikong7952]

Thank you for sharing this very useful clip. You are skillful, beautiful pictures. Sorry, there is no circuit diagram

[@cemalcan7340]

sayende elektroniği sevdik. emeğe saygı. teşekkür ederiz.

[@josemendoza.l]

Muy buena la idea, Saludos desde Valencia-Venezuela...

[@objektifphone]

Zafer abi güneş paneli videolarını izlerdim zamanında 5 bin abonen yoktu, Şimdi ise 800 binden fazla. En kısa zamanda 1 milyon aboneye ulaşman dileğiyle. Teşekkür ederim yaratıcı videolar yaptığın için 😊

[@jordangibson695]

Blinking lights. Wow...never saw that before

[@altvamp]

That's blinking amazing.

[@leszekpawlak7243]

W filmie wkradł się mały błąd, nie 220 uH tylko 220 uF. Pozdrawiam 🫣

[@J-Justice666]

Nope... never seen blinking lights before..... totally amazing.

[@abysspegasusgaming]

The 12VDC supply was unnecessary for a drive voltage, tell tale by the green LEDs illuminating in a yellow-to-red color spread., symbolizing that they were being overdriven to their breakdown voltage and would eventually fail due to said breakdown if not dying to thermal breakdown instead. Something along the lines of 6 to 9 VDC would've sufficed. I've blown up enough LEDs due to voltage overdrive to know that the colors changing to something they weren't made to be is the sign that they are dying and quickly.

[@ВОЛЬНАЯТРОПА]

Можно добавить оптический элемент и простенькую схемку управления чтоб включалось с наступлением темноты.Красный-оставить мигать редкими вспышками а зелёный-настроить на постоянное свечение.

[@z3r0c00l2]

Very very interesting 🤔😊

[@mahdibaghdadi5012]

12v is so much. I hope you make such this works with 3v. 👍👍👍

[@the-erro1]

Nice! A bike flash light! I’ll make one too

[@mehmethasipgunes6948]

Üstadım çok güzel şeyler yapıyorsunuz fakat bu yaptıklarınızı kullanmak , daha faydalı bilgiler edinmek ve daha fazla bir kitleye ulaşmak için Fikrimce sadece altın ve madeni gördüğünde öten bir aparat yapılabilir ve toprak altında kalan altın kullanılabilecek bir mekanizma yapılabilir kolay gelsin 6:22

[@bipinshaw2357]

Super maza aa gaya 👍

[@MR-ub6sq]

What is the point?

[@berryj.greene7090]

A full schematic would be nice. What chips are they? PC817 are opto couplers. What is the purpose?

[@sparkfishes]

PC817 are opto coupler

[@sparkfishes]

To isolate any feed back from the caps

[@berryj.greene7090]

Thanks @@sparkfishes

[@Electro_JK]

You're all contents are just awesome ❤

[@robc.5745]

you got a steady hand.

[@afandash]

Ну, очень красиво!

[@АллаГридасова-н1с]

Только желательно для каждого светодиода подобрать свой резистор. Так схема прослужит дольше.

[@evgeniyh3323]

Фейспалм

[@ronz101]

The burned insulator material on the holder is a lesson in itself. 😂

[@はかまだれ]

Thank you for showing us your interesting circuit. On a different note, I believe you are using flux in this production. Could you tell me the flux you are using? I'm curious as to what kind of flux to use to achieve such beautiful soldering. I'm sorry if it's difficult to read because I changed it from Japanese to English using Google Translate.

[@PinePondCTDevilsHopyard-fy3hj]

Probably lead solder with Flux core.

[@clarencegreen3071]

Look for a flux for electronics applications. One brand is Kester. It comes as a paste in a small can or as a liquid. Get the paste. Note: do not use an acid flux; it will corrode.

[@a.karley4672]

@@PinePondCTDevilsHopyard-fy3hj Extremely hard to get lead solder these-decades. RoHS (Restriction of Hazardous Substances) Regulations killed it in the early 2000s. Since Brexit, Britain has had the OPTION to revoke these laws ... but lead remains very toxic, and even if we did revoke the laws, nobody would dare to face the liability issues of using it. Electrical solder is a range of tin-bismuth-cadmium alloys these days. None of which are nice chemicals, but none are as bad as lead.

[@sergeykurpich9680]

Очень полезная штука на Ж/Д переездах. Главное что бы на шлагбауме их было побольше.

[@SLSERVICES2012]

εξαιρετικη ιδεα....2 otocoupler και ενα καρο υλικα και συνδεσεις για να αναβοσβησουν δυο ledακια....

[@sambearing7687]

Impressive.Bravo!

[@aliffarhan6538]

Keren sekali boss..boleh cuba pasang pada truck

[@AnetaDebnarova]

Supr je to 😃 😃😃😃😃😃😃😃😃😃😃

[@ozboomer_au]

'tis nearly 40 years since I enjoyed mucking about with these things... and for me, it was to put a flashing light on a boomerang so I could do a time lapse photo at night to analyse the flight... Maybe an NE556 dual timer would've done it simpler with a smaller parts count? ... but it would likely be more $$$.... YMMV...

[@faellyn_nnaa]

wow rumitnya🤓

[@Ministry_Of_Silly_Walks]

Very good soldering technique

[@xavierdelfinoscripnik59]

Precioso trabajo!!! ¿Y cuál es su utilidad diaria en un hogar promedio????

[@hugogarcia7060]

Fantastic!!!! 👌

[@GrenPara]

Hello, Great video thanks for making it. Just found your channel and subscribed to it as I think it is great.

[@kugeldrechsler866]

The red LED in front left Position has been connected in wrong direction - other than indicated in the video ! :-) Best wishes!

[@glennlove461]

it still works, so how can it be wrong

[@ZAFERYILDIZ52]

👌

[@FunkySpunkyJunky]

@@glennlove461 he removed it and turned it around before the end of the video.

[@joseairton5300]

Nossa senhora! É cada projeto massa e eu adoro ver isso não só v mas fazer também . Parabéns meu caro Deus abençoe

[@ZAFERYILDIZ52]

Não entendi muito bem o que você quis dizer, mas obrigado mesmo assim.

[@mkarslan66]

@@ZAFERYILDIZ52 "Bizim hanımefendimiz! Her proje harika ve bunların sadece görülmesini değil, yapılmasını da görmeyi seviyorum. Tebrikler canım Allah razı olsun" demiş :)

[@lucianomendonca121]

Só não explicou qual é a fonte de alimentação.

[@mkarslan66]

@@lucianomendonca121 look at 05:26 please. Power is 12V DC

[@коткотофеич]

офигеть цветомузыка на диодах)) бля прогресс)) мы раньше на 100 ватт лампах делали и обходились всего лишь тиристорами))))))))))))

[@pierremainstone-mitchell8290]

Nice one indeed!

[@Hultis-Funkbude]

Thanks for the video. Nice work! 👍

[@ShadowGPSDFX]

For what purpose

[@teist111]

Навесной монтаж это круто выглядит здорово

[@ZAFERYILDIZ52]

Спасибо

[@teist111]

@@ZAFERYILDIZ52 Сам пытался разобраться в электронике вроде просто но мне честно ума и времени нехватает

[@MRNDESO-ps7bz]

​@@teist111 anda harus berubah menjadi sekecil elektron untuk bisa memahami bahasa atom 😁👍

[@martindekker8203]

Hey how would you build an led system where the main power supply switches polarity from a slide switch button and flashed 2 led's if button is switch to the left and 2 different led's when switch button is moved to the right. The button switches polarity when switched from right to left and led's flash. Cheers

[@sparkfishes]

Thank you for this video......I wish I could be so neat ....Did I miss what was the applied average (Vcc) Please?

[@АлександрКоробкин-й7х]

Похоже на полицейскую мигалку. 😀

[@ulrichwalter4171]

Hallo, gibt's hier auch irgendwo Stromlaufpläne?

[@ThachXuyenchannel]

This is light for police, right?

[@laerciouam]

Só queria aprender à soldar como você, e já estaria muito bom!

[@HarryHound]

Nice

[@ZAFERYILDIZ52]

Thanks my friend

[@PremKchura-i6w]

Tr ke project bnaya kro bhai jo asani se mil jate ho jaise ki 547tr 😊

[@donotwantahandle1111]

Substitute a blue light for the yellow and put it behind the front grill on your car. See the traffic part to let you through!

[@malcolmdrake6137]

...right to a jail cell.

[@ВладимирШабалин-и2г]

Как всегда лайк.

[@nizarkailani6463]

if you have the same size capacitors why does the yellow light up more than the red?, are the resistors different ??

[@bencoss7003]

Work good as a flasher catch somebody's attention be good for your own personal use, plus the exercise of putting things together to see how things work especially if you started out with a just breadboard and to make and build your own skill level. Good job I got some yellow lenses that would be a easy Mount to fit it in.

[@robinbrowne5419]

Cool 👍

[@narayanBajaj-nj5ec]

Kya ye 4 4 led ke set ko jaayega ya jyada led laga sakte hai

[@ИгорьМарачев-о9ф]

Какой долгий и кропотливый процесс! Я ждал от него какого-то чуда... Чуда - не произошло. Обидно!

[@selamibayraktar8292]

Usta maaşallah ne kafa var sende Allah işini rast getirsin Tebrikler

[@MES6664]

Great job 👍

[@jeyarajkichu15722]

Good job... Watch at 2x speed

[@claytonsimplot9554]

Great idea,why does it work?

[@muratkoyluoglu80]

Zafer bey kapasitif sensör iki kablolu yapımı hakkında video yaparmısımız lütfen

[@HungLe-dz1jy]

Hay quá ❤❤❤❤❤❤

[@Technotronic27]

Мультивибратор - только в оригинальном исполнении, с оптической обратной связью, где базами транзисторов управляют диоды оптрона😉

[@АликЮсупов-к8е]

Точно и я об этом, я, собирал на мп 42 б

[@isidrodeleon673]

Best with the CI NE 555 or 556

[@Hararion]

On the video 3:53 there’s an error, there is220 uf, not 220mh…

[@starydedecek]

SUPER

[@lesjones5684]

Are you feeling better today 😂😂

[@billdomitilli8125]

Capacitance is in Farads, not Henrys, that's for inductors.

[@raby_65]

Really?… A pump circuit?… You must be targeting junior highschoolers…” here’s something you’ve never seen”….🤣😂😆🤣😂

[@md.sabirhussain237]

Kindly include the schematic diagram also.

[@Craig52-zq1bt]

Micro Farads, NOT micro Henrys.

[@crosstalkvideo5595]

@ 3:55, I've never seen a cap in uH. I am sure the author meant uF.