POOL PLUMBING INSTALLATION - TIMELAPSE - HOW TO PLUMB A POOL

[@UltimateTechHub]

This video is our Pool Plumbing Installation. We hope you enjoy it! Thanks for watching!

[@meliketanberk2173]

How sad are you liking your own comment?

[@bambamflintstone5242]

Latinos at work. God bless them all!

[@Big_Blue_Eyeland]

Not an instructional video… However I actually got the information I needed “pipes covered with sand “ this helps protect the pipes from the soil which expands when wet and contracts when dry. This can cause large shifts which can crack the pipes or cause glue joins to come apart.

[@brinleynicholson4588]

As someone who is currently dealing with a underground leak on a 20+ year old pool, I feel bad for you if you ever have any. That amount of pipes looks excessive, and most run directly beneath the pool making them probably unrepairable.

[@WesProphecy2032]

Most pool decks are made with pavers so you can access the pipes in an event of a leak. If you have concrete then you need to use concrete saw to cut out the section where you suspect a leak. It's probably a leak on the return side, just cut out the old pvc reinstall up to a good portion of the pipe and connect with a slider repair sleeve. If it's a line somewhere under the pool, just isolate that line near the pump. If you have enough returns you should be ok to keep that one closed off.

[@brinleynicholson4588]

@@WesProphecy2032 no bud, it's worse than that. Already sawed and jackhammered it up and replacing all jets and lines to the pump. Whoever uses "flex" PVC has one coming lol

[@WesProphecy2032]

@@brinleynicholson4588 Not sure why they ran so many lines under the pool. Should only be one drain line and everything else along the walls.

[@SaveOurSnipers]

@@brinleynicholson4588 it’s the torching on the pvc that does that. That flex is ruining the pipe 100%

[@victorperez1368]

Awesome

[@UltimateTechHub]

kzbin.info/www/bejne/enK8Z3ajgb6nmqc

[@desertcamel3573]

Great video! do you do swimming pool plans for permits? How much?

[@Waikatotek]

Awesome pool. Great build vid 👌

[@UltimateTechHub]

Thanks for watching I really appreciate it. I have quite a few videos on the entire pool building process from start to swim!!

[@infinitest1996]

You must leave in an area where your next door neighbor is a mile away!😅 pool equipment location needs to be 5 feet setback from property Line. Yours is an area where at most you have 4 feet and you are within those four Feet. Did you build this with Permits? Just wondering your lucky if your city is more flexible with building codes.

[@UltimateTechHub]

We had an inspection by the city and passed with no issues. Las Vegas may have different codes for pools.

[@mikekennemer7737]

Only the heater exhaust needs to be 5 ft if it is by a fence where you have another home. ICC

[@thedudefromU]

Would've liked detailed explanations of each plumbing line and component from the plumbers

[@Smooleo]

Absolutely great epic work guys 👍

[@eduardopreciado3987]

Plumming looks good! The only think when u have a inspeccion they goint to tell you its no good to heat the pipe!

[@stephanweaver1960]

Covered w sand to protect it. You cannot pour concrete directly on pipe and in broader process inadvertently damage piping

[@UltimateTechHub]

Thanks for the great information. I thought that was probably the reason. Make sure to check out my finish pool build superlapse it's only 8 or 9 minutes and you can see the finished pool. Thanks for watching.

[@jejrock925]

You mainly cover it to keep the grade and flow perfectly where you want it

[@luisfabian5995]

They forgot the rebar

[@UltimateTechHub]

Its later on in the next video.

[@kennypayton5103]

Regarding is after plumbing

[@JoshTheGamerOfficial]

They mood the pipe for roller coasters

[@sarathak2392]

if in case any leakage happend in future how you will rectify the leakage?.. you will break the pool?

[@UltimateTechHub]

Yes they would have to break the concrete to fix it. But all plumbing was pressure tested before any concrete was poured. Thank you for watching I really appreciate it.

[@jonathansantos2271]

Awesome example. Helps so much. Thank you.

[@UltimateTechHub]

Thank you for watching!

[@jonathansantos2271]

I was wondering, do you know how much water pressure can most pumps endure or service?

[@user-w395]

very questionable heating up pvc pipe to bend it vs using sweep 90! might shorten life or make brittle . flow is better tho

[@kevinoliva680]

Not questionable if you’re actually familiar with the material

[@chuckschillingvideos]

This is a common practice and reduces the number of cuts and glued connections (aka "leak starters").

[@jasonk876]

​@kevinoliva680 why not use PEX if you want that. There is a lot of potential for errors and malfunctions when you heat PVC like that. It's an undeniable fact. Maybe it will be OK and maybe not. It isn't spec'd to be bent like that

[@SaveOurSnipers]

Torching that pipe is gonna be reason for a break in your future. Call me for a repair 😘

[@ardilanprasetyo3890]

MANTAP 👍👍

[@jarvisbradley9132]

Can you tell me more about the 22 pool cleaners?

[@MrBmxbrawler]

Its a floor cleaning system. The return water forces dirt to the main drain

[@desertcamel3573]

good job! are you guys in California? Can you explain line by line? I have escavation done. Can you explain step by step

[@pointblank6702]

Did you ever get this figured out.

[@Musa.9766]

Super

[@UltimateTechHub]

It was fun to watch them install all those pipes and watching them bend the PVC with the torch was amazing.

[@johnmorgan1313]

Actuater ?

[@conqueringlion420]

Mexicans are amazing aint they

[@GokuSon-fk9pm]

Why so many pipes and most are capped at the end ?

[@UltimateTechHub]

They are capped until they pour the concrete and plaster. You don't want the concrete to get inside the pipes. There are many pipes for the infloor cleaner.

[@chuckschillingvideos]

Only one drain? Where I live two drains are required for an inground pool.

[@UltimateTechHub]

I live in Las Vegas and 1 drain is all that's required.

[@chuckschillingvideos]

@@UltimateTechHub That's what I'd do too. I hate the double drains in my pool but there isn't much I can do about it.

[@EPTRotorsports]

They cover them with sand so they stay in that position when they poor the concrete. If they poor the concrete and it damages a pipe they are fucked.

[@UltimateTechHub]

Thanks for the great information and thanks for watching!!

[@ajaybhatt9642]

@@UltimateTechHub What depth of sand between pipe and concrete is recommended for a south florida pool?

[@Siobhan-zn4uh]

Very fucked served

[@MrBenaustingoodtimes]

How much would a contractor make for this installation?

[@joshualopez5976]

How much would it cost to do the plumbing phase?

[@UltimateTechHub]

Probably about 8 to 10 thousand with the pump and filters.

[@danej1up124]

For when their going to sent it

[@ToNYD2WiLD]

Just had this done today confused why this method over rebaring then doing plumbing ?

[@kevinoliva680]

You ever plumbed? lol...if the rebar is done, how are you going to fit pipes in between the form and the rebar? You can’t

[@navy79930]

@@kevinoliva680 I was like WTF did he just say? Lol

[@Chrisxantixemox]

Imagine one of those lines under the pool cracks or starts to leak and you have to demo and rebuild basically the entire pool to fix it... EEEK

[@AM-pl4vs]

Did not explain which pipe for what.?

[@quevenmz8456]

Was there a shortage of fittings?

[@UltimateTechHub]

Nope

[@chuckschillingvideos]

Fittings take time to align and glue up. It's a lot faster/cheaper to bend the pipe into the shape you need than to kinda/sorta get there with fittings. There are only so many elbow angles available in PVC, as you may not know.

[@jaymayfishing3576]

How long did it take them to do all that in the video?

[@UltimateTechHub]

2 days

[@hugoperez3387]

Im a pool plumber,here un Dallas tx one job Like that is for 1 day

[@ivannavarro504]

@@hugoperez3387 so true, same amount of people in our crew here in Vegas and we get that job done before lunch hour.

[@cw8537]

You’ll be calling another pool company to come dig up leaks in a few years. Like a handful of spaghetti, PVC is designed to withstand pressures in ONE direction. By heating it you weaken the material along its strongest axis. You’ve said many times in the vid “they’re doing this, and I don’t know why.” Your pocket book will know why in time.

[@UltimateTechHub]

No leaks after 4 years, so we are good! Thanks for watching and for commenting!

[@arunarunkumar9974]

Bottom fast leyear Steel after pipe work

[@robertvazquez8706]

what's the actuator?

[@quevenmz8456]

An actuator is a motorized valve that helps open a jandy valve. Mostly used on a 3 way valve. These are set if a homeowner doest want to physically go to the equipment and be changing the valves all the time. They can also be programmed with the ez touch so you can contol it from the phone or throught the panel.

[@CruJonesBeatBartTaylor]

@@quevenmz8456 What valve would the homeowner need to change on a recurring and regular basis?

[@JC-hp3cx]

How much did you payed for plumbing?

[@chuckschillingvideos]

Bet it wasn't cheap, but good things never are.

[@rock-afire-fan]

why only 1 main drain?

[@UltimateTechHub]

I never see more than 1 main drain in a pool this size. Maybe in larger pools. Thank you for watching!

[@rock-afire-fan]

@@UltimateTechHub I want to build one of those 1950's style pools with walls that curve down to the deepest part like bowl. Like the pools people skateboard in after they are abandoned.

[@maiconcosme1301]

diretrizes da comunidade

[@steverenan5941]

Why a lot of pipes? Not explained well what are those purposes..

[@UltimateTechHub]

Inground floor cleaners. There are 5 zones with 3 to for pipes per zone.

[@SaveOurSnipers]

Mexicans. This is AZ

[@UltimateTechHub]

Las Vegas

[@richiet7150]

they have to heat the pipe to bend because of the state of the dig to contours with ground levels ! you could buy bends ?? so many things wrong here ..... a machine and competent driver would have created perfect levels ... all rigid pipework too? wonder how long that will last, I'm guessing not a long time and good luck repairing any leaks. don't try this at home

[@richiet7150]

so so wrong

[@maiconcosme1301]

Comentárijos ko kKkK coil você não

[@guadalupetorres2760]

Do not heat the pipe at not time 😑

[@UltimateTechHub]

Too late. Lol! My pool works great after 4 years. You should watch the full build! kzbin.info/www/bejne/enK8Z3ajgb6nmqcsi=mj4Qf0jS8qjX0qyt

[@chrismcnally8506]

I thought this was a builder, this is just a home owner taking video of professional pool builders doing their thing.. must be real annoying to have someone taking video of you while working all day. Explaining what's going on, when you really don't know what's going on.

[@maiconcosme1301]

Comentárijos 69 ko kKkK coil você não

[@mikekennemer7737]

Don't know how to plumb a pool! What fool don't pressure test water lines with a 10 ft up right for water weight?

[@Siobhan-zn4uh]

Britjules tool with a Sam for suck

[@MichaelAnderson-ib9bn]

Not helpful if you don't know what all the components do then why make a video total pointless for anyone looking for some tips