ZL1 Addons Rock Guard Install - Toyota GR Supra

[@luisr.gerstenmaier7294]

I am concerned about the portion of the pushed in rivet falling into a close area and making noise when driving. Thanks

[@CarGuy11]

Nah it fell out plus it’s small light plastic you wouldn’t hear.

[@AstrobioMike]

@luisr.gerstenmaier, that bugged me too, making noise or not, ha

[@highboost1454]

I looked at the rear bumper area and we have the exactly the same wear spots. I've ordered Armaspeed version of the splashguards.

[@CarGuy11]

Nice! Thanks for watching and hope you check out more Supra videos on the channel!

[@highboost1459]

​@CarGuy11 I thought you sold Supra. You still have it?

[@CarGuy11]

@@highboost1459 Yes sir. My latest video is with Supra.

[@davidhorne2326]

I put a set on mine yesterday! Back ones were a bit testy, as I didn’t take the back tires off. They should help out.

[@CarGuy11]

Yeah rear would be tough without removing wheels.

[@huntjunky1]

Worked out great...most would not even realize they are there and have become a necessity running the same 13 mm spacers w/ 305s rear and 275s up front. Thanks for the info...before I road blasted the paint. I also added clear protective film, just in front of the rear wheel well, where you'll pick up crap from the front tires. I think the $110 investment, between the two, is money well spent.

[@CarGuy11]

Cool glad to hear it worked out!

[@stevepearson5511]

Just what I was looking for. Running 305s on rear and 275s up front w/ 13mm spacers all around. These guards in conjunction with clear film should do the job. Thanks

[@CarGuy11]

Nice! Thanks for watching!

[@stephendibari5010]

Watched this one again today. Love these and they look like OEM Definitely saving this video for my future Supra !!

[@CarGuy11]

Nice yeah I like them!

[@josephhall1070]

I added these a couple weeks ago and I think they look good actually especially for 50 bucks or so. Super easy to install. I run 13mm and 15mm spacers so the added protection is nice.

[@CarGuy11]

Yeah I think it’s worth it.

[@TheCarCrazyGuy]

Looks good. Could you have placed the rear protectors behind the wheel well liners like you did in the front?

[@CarGuy11]

Thanks! No there are no slots for adjustments.

[@joemessman1]

Sure beats getting the paint chipped. I have the XL guards on my Z06. I'll put anything on to keep the paint good. They look fine on the Supra. I just don't like rivets. When the sideskirts were installed on the C7 at the dealer I had them use screws instead of rivets.

[@CarGuy11]

Ah ok thanks!

[@andylam4350]

Is there anyway to install the rear without removing the wheels?

[@CarGuy11]

It would be very tight but I guess it’s possible.

[@lambbosbread123]

Dont love the look of them, the rear looks fine but the front ones just look strange. but they are a good to have if your worried about rock chips

[@CarGuy11]

Yeah I actually hear less stones flinging on inside lol.

[@lambbosbread123]

@@CarGuy11 well thats great news !

[@stephendibari5010]

ACS Composite makes them for Corvettes. They’re are kind of expensive but the XL one is super wide, much wider than the OEM. I’ve watched the install and it’s much easier than the Supra

[@CarGuy11]

I have the OEM Corvette ones on C7. They are very subtle.

[@jerryjin3427]

Wait. So you just leave whatever fell in inside?

[@CarGuy11]

Yeah the small plastic pin should fall out when you drive.

[@autonut21]

Great vid! They look as good as splash guards can look. 😂 My only concern is the rear ones don’t have some sort of washer to spread out the load. I wouldn’t be surprised after some track days that the head doesn’t tear through the plastic splashguard.

[@CarGuy11]

Thanks! Yeah I’ll have to get some black washers for them.

[@thedrunkenredneck4898]

Do you have aftermarket wheels?

[@CarGuy11]

No factory rims.

[@thedrunkenredneck4898]

@@CarGuy11 pardon if this is a dumb question but what's the purpose of the spacers?

[@CarGuy11]

To bring the wheels flush with the fenders as shown in the video.

[@JimmyChang-i2e]

Is it possible to remove the rivets punched through the liner?

[@CarGuy11]

Yes most will fall out when you drive.

[@JimmyChang-i2e]

Awesome! Just about to perform this installation. Thanks for the quick response!

[@chiefjoe528]

Looks good and nice video.

[@CarGuy11]

Thanks man!

[@jefflee6975]

Nice. Just ordered some through your link!

[@CarGuy11]

Thanks & hope you check out more Supra videos on the channel!

[@jefflee6975]

Yep, subscribed, keep them coming.

[@EmanuelRolla]

Nice mod 👍

[@CarGuy11]

Thanks & hope you check out more Supra videos on the channel!