Zoom H4n Pro - import & mixing tips - How to use 4CH and MTR for combined recording - create mix

[@GaryLet]

Thanks for the video, I decided to use the H4n for something quick and didn't want to deal with the latency of my DAW so I went to drag a file from computer to H4n and couldn't get it to play in the mtr mode until I saw you karoke switch step about 14:50. Saved me from "gasp" reading the manual. :)

[@stephencervantez7018]

very nice work

[@AndiPrill]

Great Video! Thank you very much. Is there a way to do a multitrack recording of at least two voices at the same time? So every voice gets an own track while using two microphones/headsets. For example an interview or a podcast. Thanks in advance.

[@BBWalkerTV]

Yes You can record 2 tracks in MTR but not in all configuration. Press Input 1 , 2 and Mic buttons on the left side to see which combination is available

[@GirardNicolasQc]

Do you have a custom device for keeping the unit stable and in angle on the table ? Thx

[@amitabhaagupta9073]

Thanks ..was very knowledgeable...I get a lot of hissing sound of the mic ..how do I get rid of it while recording..do is need to reduce the mic level while recording..pls let me know..thanks in advance

[@BBWalkerTV]

Please Tell me which mic are you using an external or those built-in? The general rule is to set the level as low as possible to avoid gaining the noise however is the signal strength is too low the only solution is to move the mic closer to the source of the sound. If recording level is too high the build in compressor starts working but the noise will remain on the high levels

[@amitabhaagupta9073]

BB Walker TV external .. XLR input (senheiser 600 shot gun mic)

[@ignasgalbogis2191]

Hello there, I can't find solution for a problem so asking ones who maybe know. I tried to record audio from desk mixer record out to left and right inputs on the H4N, but left channel is much louder than right, is that an issue with a recorder or I dont know something ?

[@BBWalkerTV]

Have you checked the input levels on zoom h4 you press 1 or 2 and volume IP down simultaneously.

[@ignasgalbogis2191]

@@BBWalkerTV it's very unusual, I tried this with two different mixers, left channel is very sensitive, so I need to set it left channel input to volume 3, while right to 84 to make it equal. But for example if I plug it to my octatrack (L & R channels) it works perfectly with 1/2 link.

[@bobbythrillz]

Yo imma need the link to that hit single

[@BBWalkerTV]

You mean link to buy Zoom H4

[@orionstarr5313]

I believe theyvare talking about the song!

[@michaelpaoli3962]

Is there way to directly record everything to ONE file right away?

[@BBWalkerTV]

Use simple stereo mode - everything will be mixed down into 1 file (stereo)

[@mattmarkus4868]

Is the filename that ends in M from the mics built in to the recorder, or the external mic connected to the recorder?

[@BBWalkerTV]

M is for microphone built-in & I stands for input 1 and 2

[@zanatoll6760]

Hi thanks for the tutorial I'm wondering why you record vocals with an other micro than the two in the H4n Is there a big difference ? Thank again

[@BBWalkerTV]

That is a good question - I will try to make a video with comparing build in mic which each other. I use external rode because 1. I know its characteristics. 2. It is better to organize - singing directly into Zoom requires special adapter and it is not very convenient to operate it in that position. I think those mic pair is best for interviews, journalism - when Zoom stands on a tiny tripod on a table - but it is worth to check it. Thanks again for the comment.

[@zanatoll6760]

@@BBWalkerTV nice I'll check your uploads soon Thanks for your clear answer

[@sarahhey8654]

You my hero 😢😂😍

[@ErickThePianist]

can i record a yamaha digital piano that only has a headphone jack.? dosen't have a output line, but it still can be use with an amplifier or external speaker... (Yamaha p45)

[@BBWalkerTV]

Sure you can - the lack of output is not a problem - the only difference is that your speakers will be muted if you connect do phones out.

[@jamcamp06]

Mine H4NPro doesn't show a mixer in the menu options.

[@BBWalkerTV]

Are you in 4CH mode ? and Disable Stamina mode

[@muraleesadhush863]

I have a yamaha psr670 keyboard I used to make beets on that But when I played it on my laptop It sounds horrible... How can paly it on a computer...

[@BBWalkerTV]

You are using midi to record. Just record this using audio recorder

[@BBWalkerTV]

In video you shouold find some interesting answer to your problem - escpecialy how to move WAV into computer with separated tracks (drums and acmp from voices) kzbin.info/www/bejne/r36leoiXp6p2lcU

[@satishkumarpatil2867]

How to connect mixer

[@BBWalkerTV]

General rule: Output L / R from keyboard to Line in in mixer - in my case 1/4 ich mono cable for each channel. Please give more details what do you want to achieve - then I will be able to help

[@AlfaMedtech]

To connect the h4n pro 2020 black model to a mixer do I need an attenuator?

[@BBWalkerTV]

No, you don't. To be sure please give the mixer name

[@AlfaMedtech]

BB Walker TV I’m new at this and I just ordered my zoom h4n pro. But everywhere it says I need a attenuator-20 to plug it to the mixer so I can record of it

[@BBWalkerTV]

The fact is that those inputs are mic levels but I set the 0.1 volume for record and There is no problem with quality or distortion.

[@AlfaMedtech]

BB Walker TV when you say volume you mean the gain level? Thank you so much for the replies !

[@BBWalkerTV]

@@AlfaMedtech Yes, on Zoom H4 when you press source number and Minus button on the side