It would be nice to show how the wires are setup and set on the Aqualink.
@Decal0327Ай бұрын
F'k yeah! Thank you, man!
@mattthewlloyd2969Ай бұрын
What are the 2 products called me number please
@TBBartlingАй бұрын
Is there a reason you used different T-pipes for connecting in the water in/out versus the acid and chlorine injection? Also, did you just use connectors provided in the Intellichem kit, or did you use additional parts?
@keithramirez6427Ай бұрын
If connecting to the Eero Max 7, you do indeed need to create a "Guest Network" to connect, at least I did. The light on the iaqualink app took a few minutes to turn from red to green so I didn't think it worked at first. Once you connect through the "Guest Network" and the light in the app is green, you can switch your phone or tablet (whatever you're using to control the iaqualink app) back to your Primary Network and the app stays connected. I also enabled the "iAqualink" skill in Alexa. That actually took almost 24 hours for everything to propogate.. but all of my pool equipment now shows as a device in the alexa app. It's awesome to be able to turn on everything with voice commands... waterfall, jets, fountain, aux lighting, etc. 😎
@lumberjakmatt76832 ай бұрын
My intellichem keeps going into alarm for no flow but everything is running fine with the filter
@Gabriel835802 ай бұрын
Great video. In your opinion, what does this system mean when it's on Alarm red light and it screen says no flow detected? but everything actually is flowing and working.
@seantweedy1232 ай бұрын
Thanks for your help. I ended up having to reset the entire pool system because Iaqua wasn't responding. Once I did that I was able to follow your instructions and get it all set up on the new router. You're the man.
@Bradley1900TRD4 ай бұрын
Make sure to pause your VPN on your phone if you're getting connection errors. That fixed my connection issue. Once the initial connection is made you can turn your VPN back on with no issues.
@anuduckworth80075 ай бұрын
How did you get the available network on the location at the beginning of the video?
@bobbyg525 ай бұрын
I found that turning on my eero routers guest connection and connecting to it was the only thing that got me back on line
@MissMandie218 ай бұрын
Thank you for this!! Super helpful!
@southocpools7 ай бұрын
Glad it was helpful!
@Ozzzstriker2 ай бұрын
Used the same procedure for my aqualink 2.0, but I had to setup a guest connection for the new eero setup. It’s the only way that it connected quickly. Thanks for the help on here.
@user-rx6dj3nq1i8 ай бұрын
!!! With EERO Mesh, you need to enable the guest WIFI !!!
@oskr300c9 ай бұрын
What do you do if you have 2.4 MH something higher??
@southocpools7 ай бұрын
iAqualink will only connect to 2.4GHZ wifi signal.
@kaylef111111 ай бұрын
Thank you so much you saved my butt. They changed my internet and my aqua link was not working. 🥰
@southocpools7 ай бұрын
Your welcome!
@brandonlavergne650211 ай бұрын
Thanks this was very helpful!
@southocpools7 ай бұрын
Your welcome!
@fasteddie9475 Жыл бұрын
THX, u saved my ass, lol
@southocpools7 ай бұрын
You are welcome! happy to help!
@CR250RidR Жыл бұрын
I hate the display/interface so much lol so old school for what it is
@southocpools7 ай бұрын
If you connect Intelichem to Intellicenter controls or Screen logic it has a pretty seet and modern display right on the phone and the touch screen.
@TBBartlingАй бұрын
@southocpools can the intellicenter app interface be used for initial setup of the intellichem?
@Quarks0010lss Жыл бұрын
Thank You!!
@southocpools7 ай бұрын
You are welcome!
@mkwcpsigwilkinson8567 Жыл бұрын
I appreciate the details in the WiFi navigation steps. You helped me out where do many videos just got me half way. Thanks
@southocpools7 ай бұрын
Your are very welcome!
@rolandramos3927 Жыл бұрын
Hi there! I have salt pool system and I’m interested in installing pentair Intellichem. Do you do installation?
@southocpools Жыл бұрын
Yes we do installations!
@dianajepsen535 Жыл бұрын
THANK YOU VERY MUCH!!! This worked EXACTLY as you explained it would.
@southocpools7 ай бұрын
Your welcome! 👍
@bludika Жыл бұрын
can you pre mix with 5 gallons of water in a bucket then dump? not saying i'll dump the entire bag in the bucket but could i do that with multiple buckets so that it'll mix better?
@Emie8230 Жыл бұрын
iaqualink NEVER displays as available on my phone ??? please help!
@southocpools Жыл бұрын
Do you have iAqualink 2.0? Maybe the Antennae was wired up wrong. You may want to call a local pool repair company that has experience repairing these. If your in Orange County, CA give us a call. You may also reach out to Zodiac / Fluidra the manufacturer at 800-227-1442
@NN-tk7uw Жыл бұрын
Our float (white cylinder) can move freely but doesn't stay up at the top. Yet, the flow alarm only came on twice. I can replace it but I'd like to understand.
@southocpools Жыл бұрын
It sounds like you may need to increase the flow. You could possibly have a clogged pool filter, clogged filter on the intellichem. It could also be that you may need to raise the RPM on the pump if you have a variable speed pump. You may want to reach out to Pentair tech support or a Pentair dealer that knows the Intellichem well.
@jeffscott3755 Жыл бұрын
Thank you sir very helpful. I’m am installing my first intelichem tomorrow. From Chicago
@southocpools Жыл бұрын
Best of luck!
@neptunepoolsserviceandrepa2529 Жыл бұрын
Where do you hook up the com wire? What color goes where? How did you program the aqualink?
@ArizonaGrandpa Жыл бұрын
An issue that some new routers are facing is that they will no longer connect to the iAqualink 2. After much frustration I discovered that if I enable the roaming feature on my new mesh router system connection fails. Disable this router function and once again there is connectivity. After consulting with Jandy, I was told I would need to upgrade to the the iAqualink 3 to eliminate this problem. A rather expensive solution, I tried to piggyback my old router onto my new system with a specific mac filter to allow this single device access. Although it worked, it created frustrating reliability. I finally bit the bullet and directly ran ethernet cable, completely bypassing the WiFi capability. Jandy pricing has become completely ridiculous.
@southocpools Жыл бұрын
Thank you for the info!
@HavenPermaculture Жыл бұрын
Thanks! Looked all over to find a video that matched the system I'm using today. Best one I found
@southocpools Жыл бұрын
You're welcome!
@patriotwoodworker6092 Жыл бұрын
How did/do you sync the lights?
@southocpools Жыл бұрын
On this job- to sync the pool and spa lights we wired the pool and spa light to the same power wire. With this device, if you want the pool and spa light to be independent you will need to of the color LED controllers. Also, there is a new model controller from Pentair. The new one has the ability to control the lights from your phone also. Link below to the new device and the app it uses. Color Sync Color Controller www.pentair.com/en-us/products/residential/pool-spa-equipment/pool-lighting/color-sync-controller-color-led-pool-lights.html?queryID=ed06783d669eaaadda6d60133ddb3385&objectID=www.pentair.com/en-us/products/residential/pool-spa-equipment/pool-lighting/color-sync-controller-color-led-pool-lights.html&indexName=prod_pentair_products It will allow you to control the lights using the Penair Home app- www.pentair.com/en-us/pentairhome.html
@xtolhim Жыл бұрын
Didn't 103' use to be the limit? That appears to no longer be an option. Any reason why?
@southocpools Жыл бұрын
The limit in the iAqualink is 104 degrees Fahrenheit. You can limit the temperature directly on the heater display itself if needed.
@cdfornal2 жыл бұрын
Where did you get the threaded compression fittings for your tees?
@southocpools Жыл бұрын
I believe this is the part number you are looking for, 606000100Z. It is listed as "Fitting 3/8” Tube x 1/4” NPT" in the Pentair parts list. You should be able to find it online or at a pool supply store. Here is the link for the parts list from Pentair. www.pentair.com/content/dam/extranet/nam/pentair-pool/residential/parts-sheets/automation/intellichem-chemical-controller.pdf
@someguy59272 жыл бұрын
Thank you!
@southocpools Жыл бұрын
You're welcome!
@bludika2 жыл бұрын
how do you control the Calcium hardness when using salt systems?
@southocpools Жыл бұрын
The salt system should be cleaned out as needed. Usually 2 times per year is good. If you have high calcium hardness in your pool, you may need to clean it more frequently or consider draining the pool and then filling it with fresh tap water that should have a much lower calcium hardness level than pool water that is several years old. Old pool water usually has high calcium hardness as the pure H2O evaporates but the calcium hardness stays behind in the pool of water.
@daviddemoya56502 жыл бұрын
Thank you, I was able to change my iAqualink, rather than pay the 120.00 service fee for them to come out and change it.
@southocpools Жыл бұрын
Your welcome!
@briclc562 жыл бұрын
Took 3 minutes -- Thanks!
@southocpools Жыл бұрын
Your welcome!
@Dlemonaid2 жыл бұрын
Very clean, nice job!!!
@southocpools Жыл бұрын
Thank you!
@sharoncouncil39292 жыл бұрын
Thank you!
@southocpools Жыл бұрын
You're welcome!
@superrgm2 жыл бұрын
Thank you 🙏🏼
@southocpools Жыл бұрын
You’re welcome 😊
@patp47892 жыл бұрын
Thank you! As mentioned previously, it was extremely helpful to see how the wifi networks interfaced on the phone. Quick and easy. If only my other smart home devices worked as easily, I'd be a happy camper! lol