You’re awesome bro! This is the info I was wanting to know
@deadpavuk765711 күн бұрын
It's great that you're interested in such old weapons, but be a little more modern and post videos at least in 1080
@bretnmannn13 күн бұрын
Aluminum/ bronze cast and quenched it much harder to cut on my mill than 4140- but it's softer than 1018 if it's not quenched ( hardened) A barrel needs to made from this!
@ScarletRebel9613 күн бұрын
Christ is King ❤
@jmjones789713 күн бұрын
Outstanding. Lotta things going around here( in Saint Louis) Lotta evil folk running roughshod over a good portion of this Earth that we were meant to Steward. Pretty timely and oddly appropriate for me personally Been a while since I've cracked open The Book. Do believe that ought to change Thank you brother
@PalKrammer13 күн бұрын
Fascinating video. I did not realize a drill bit could drill into that bolt steel without either the bit or the bolt shattering or seizing. What about heat and friction? I thought injection of oil or water be needed - apparently not. Lastly, if the (carbide?) button is strong enough to go through the steel bore, what grinder material is used to cut the rifling pattern onto the button? Thank you for this video and sharing your knowledge.
@TheIdahoanShow13 күн бұрын
I do try to add a few drips of cutting oil to the hole or drill bit periodically as I'm drilling the hole, but continuous forced injection isn't necessary. The rifling button that I used is just made from hardened tool steel, so most grinding bits would work on it. But if you can get a carbide blank, a diamond dremel bit will still grind it.
@kal-el553519 күн бұрын
It’s essentially turns it into a dumb dumb round which is super illegal. I’m sure there are no laws specifically against firing a mini ball backwards but the damage it causes is banned by international law.
@TheIdahoanShow17 күн бұрын
For the record, the term "dum dum" applies to any bullet designed to expand on impact, including all types of hollow-points. International convention prohibits their use in war, but they are perfectly legal (and widely used) for hunting, self-defense, and domestic law-enforcement.
@kal-el553517 күн бұрын
@@TheIdahoanShow It’s hard to tell because the musket is technically “rifled”, and technically will “expand on impact” if fired backwards. But it wasn’t “designed” to do that. It’s only designed to expand when fired. So it’s hard to tell if it wouldn’t fit the legal definition if fired at another person.
@parsoakhorsandmusic23 күн бұрын
Very well explained!
@taterbug7024 күн бұрын
Next time make a squeeze bore rifle and projectile. See how much faster that will go.
@isaal-magyari920325 күн бұрын
you've done the two hardest parts of an automatic, barrel and magazine
@gmanshackshack682226 күн бұрын
Your line of sight is not perpendicular to the target, so some of your error is being created due to the angle of intersection. Place your target at eye height when firing to alleviate. Add to that paced out, rather than measured ranges...
@colint26 күн бұрын
You are correct, that might have been the worst ever experimental procedure I've ever seen. So many things wrong.
@BearMeat4Dinner26 күн бұрын
How do you make this kind of barrel?
@pilgrimm2326 күн бұрын
how geek. YOU are an engineer. I took notes :)
@nogmeerjan26 күн бұрын
How do you determine whether your sight is on the first or the second hit distance?
@davidjernigan816127 күн бұрын
Could the deviation be due to the fact that when shooting you didn't have the bore of the rifle parallel to the ground and at the approximate height of the target?
@davidjernigan816127 күн бұрын
A real offender in this are Air force PCP air rifles.
@rickoshea813827 күн бұрын
Nice play on words. For short ranges a low HOB is advantageous. For medium to long range a greater HOB is beneficial. I say this before watching the video.
@xxxlonewolf4927 күн бұрын
A thing tactical shooters practice to know. I've not seen anyone do the math in an equation for it though. 😊 Very interesting & cool, good data. HOB is only really cared about with optics because they are so much higher than most irons. But that being said, irons on an AR they higher then most "traditional" iron sights on "older style" rifles. Still, having a decent 'guess' before firing rounds is a very good thing.
@Valerywiseart27 күн бұрын
in such cases, you can use a periscope mounted on the front lens of the sight,as well as a side sight, I often aim from the side when shooting at close range
@louislarose661327 күн бұрын
Great Video Sir ! This is actually valueable data. Thank you for sharing your efforts with us.
@ZappyOh27 күн бұрын
Snow in August?
@rickoshea813827 күн бұрын
Clearly the video capture, editing and release don't occur on consecutive days.
@gslavik27 күн бұрын
I like guns, and I like math. Both in the same video is even better!
@LuizHBarosoАй бұрын
This guy made a gun with pipes? Now I know why the life estimative of mens is shorter.
@poiuytre11111Ай бұрын
🤠😎
@scapegoat1313Ай бұрын
Thank you for proclaiming the Word of our Lord. I am praying for you and your family, brother.
@MO123rulesАй бұрын
Mix egg nig with gingerale. It's surprisingly good
@DavideRamboPTАй бұрын
Idea why not make ULR-50 But a 308 version
@Chsarge1885Ай бұрын
Bro needs quick reload
@RogersGirl88Ай бұрын
“So how’d you blow out your right ear drum, dude?” -“Here, lemme send ya a link to a vid.”
@johnpapa8554Ай бұрын
i dont get why this great video hasnt thousands of likes...
Thanks for this video. I've been making harnesses for Scuba tanks using solid copper rivets but wanted to try copper pop rivets and needed to know how to finish the back side. This video has been very helpful.
@ResearchPcАй бұрын
this man is a living legend
@1957StrokerPanАй бұрын
I don't know about the waking up part, but this video put me right to sleep 😂
@youngbloodbear9662Ай бұрын
I like the idea of
@sinisterthoughts2896Ай бұрын
that's a cool hack indeed!
@BeercanBushcraftАй бұрын
Reading light on a timer works for me, I'm usually awake before it turns on! Nice one mate 👍 Cheers and all the best to you and yours 👍 🍻
@rickoshea8138Ай бұрын
I cover my face with a dark T-shirt, to block light from my eyes and keep my bald head warm. So, no light short of a thermal lance is going to wake me. I would like to be woken by bird noises. These would start gently, then increase in intensity over 10 minutes, until it seems the room is replete with dueling roosters. The Australian market might prefer the sound of Tasmanian devils fighting.
@VikOlliverАй бұрын
I got the biggest wifi RGB LED bulb Icould find (an Athom one) and control it with the free HomeAssistant software. This does not send data to the mothership and does a lot of other home and horticultural control stuff.
@ghostbanana271Ай бұрын
I hooked a piezo transducer to Arduino, placed it under my mattress and when my wake up time approaches and I move in bed it beeps once a minute.
@GF_BurkeАй бұрын
Nice man! It's frik'n hot here in the Owyhees.
@ZappyOhАй бұрын
That's a pretty nice idea. I think I want one of those :)
@TOMAS-lh4erАй бұрын
HI from Arizona, long time subscriber, FYI , I'm still using the RED bandanas I bought fr9m you a long time ago,
@xxxlonewolf49Ай бұрын
A cool use to re-purpose the tech :)
@xxxlonewolf49Ай бұрын
My alarm clocks blasts a chosen piece of music...as jolt me awake, unless I am just totally 'dead' to the world :P
@crookedaxleАй бұрын
You run an unshrouded wire wheel with no eye protection? Good luck with that.
@quirty8642 ай бұрын
Just found this, guess they are not pushing your channel. Pretty darned chuffed to see some work on this. Good job, keep on trudging.
@youngbloodbear96622 ай бұрын
Id go through the integration to calculate it but nice to have the answer handy