Amazing DENT Repair Tutorial | TESLA Model Y With Unexpected Fail 😩

This video is a FULL ON How To, and or a Tutorial on HOW TO Repair the most common dent on a Tesla Model Y Tailgate.
Forget the Bit Where I Messed This Dent Up! 🫣
I made sure to capture every moment of this repair so that you, the viewer can really see how it’s actually carried out. No rubber plungers, hot water or welding tools and certainly No Filler or Paintwork
This repair took around 8 hours to complete. In real world times this would take around 4-5 hours (without any filming etc)
I started off the repair using a lot of heat and a soft cap rubber tipped PDR bar
After struggling to push the dent out I released a lot of tension above the bodyline which really helped.
Still putting up a fight I decided to use Lateral tension to stretch the panel and this gave me a lot of help!
Lots and lots of fine pushing and tapping down until eventually the dent was up.
The bottom panel edge was the toughest part of this repair and with my handy technique of repairing this I had it looking amazing.
A few last tweeks and I created a chip in the paint and I was horrified.
Yes the paint had been compromised from the accident and these issues don’t often happen but still. I’m fixing dents without paining and this is real life.
I’m not perfect but il happily share my skills and knowledge, and help you with showing my repairs to you.
-----
I hope you can take away some information from this if you’re a new dent technician or really interested in the job.
If your a potential customer looking for an accountable technician then I hope you are happy with how we operate, you can see our many repairs and this will give you the peace of mind when booking your repair in. We repair many customers vehicles up and down the country, we are in Beverley and we set aside all the time in the world and look after you if you travel to us.
.
Paintless Dent Removal or PDR is a method of removing minor dings and dents from the vehicle bodywork without the need for filler and paintwork. This is a highly skilled process in which the dent(s) is massaged from the rear of the panel or sometimes from the front using glue pulling methods.
💚WE NOW HAVE MEMBERSHIPS!
Join this channel to get access to perks:
/ @dentremover01
Repaired, Filmed & Edited by Martin Sadler
Please SHARE this video and give a LIKE & SUBSCRIBE to keep in touch with all the latest videos…
For more information on what we are about
www.dent-remover.co.uk
All Soundtracks by Epidemic Sounds
Under Licence
--------------------------------------------
See you soon
Martin Sadler
#paintlessdentremoval dentremoverbeverley #youtube #collisionrepair #dent #carrepair #cryptotrading #supercars #watchesformen

[@Hambini]

Wow, I remember when you came around to fix a dent in my garage door and before that in my subaru! how times have moved on and you've got your own place, well done.

[@dentremover01]

Thank you for watching and I hope you enjoyed it? I’m trying to remember your repairs! A garage door? Not done many of those! I hope I made good repairs

[@user-ot6lg1it7n]

Хорошая работа,снимай побольше видео

[@dentremover01]

@user-ot6lg1it7n Спасибо. у меня еще 3 почти готовы

[@1st_track_dents]

Another in depth video from the PDR master, well done Martin! 👏👏👏

[@dentremover01]

Thanks Jake! I try my best as always! Appreciate your feedback from the PDR Master !!

[@DentZero123]

You are so very missed my friend outstanding job in your video. Keep them coming. You definitely should be a teacher. You explain everything so very well. I’m very proud of you for what you have done. Hope to see you at MTE next year.

[@SIHRA2]

When its large dent I still can’t get my heard around how he can see the tool tip when pushing on a large dent. With my small experience I would be tempted to use fog light but there’s a reason why he’s so good. Lovely work. Keep going brother. Thanks for the videos.

[@MrSiViF]

Hat's off for showing the mistake you made. It happens and you owned it. Much respect!

[@dentremover01]

Thank you very much. Got to be honest on a job as not every job is perfect

[@MrBogdanoww]

Привет Мартин) я прям восхищаюсь твоей работой. Сам занимаюсь PDR вот только пол года) смотреть как ты работаешь и все объясняешь, одно удовольствие)

[@dentremover01]

Thank you so much! I hope the subtitles worked if you chose them. And thank so much for watching and enjoying my videos I really appreciate it

[@MrBogdanoww]

@@dentremover01 могу сказать точно, из многих мастеров, вы у меня в фаворитах) я смотрю ребят на многих языках, но в итоге вы лучший) каждый раз как фильм) продолжайте еще ))) (наши мастера уже снимают фильмы, с музыкой с графикой, я считаю это лишним) прям в живую бы поговорил с вами, очень интересно, но к сожелению языковой барьер)

[@alexandruszilagyi1176]

Hi Martin,you do a great job with Pdr ,Great technician ,and also editing the video I know take time to do everything until the clip it’s done. All the Best 🙌

[@dentremover01]

Thank you Alexandru 🙌🏼

[@billramsey800]

Hey Martin that looked to be a very complex repair with an excellent result but for me with all due respect to Ev owners they really are computers on wheels. Quality video 😎🦘🇬🇧

[@dentremover01]

Thanks Bill hope your well? We are a lot of damaged Tesla’s. Done a few of these but I know where I went wrong. Won’t happen ahainn

[@user-se4vm7hn4s]

You are amazing. I'm always watching videos. Thank you always for the good video.

[@dentremover01]

Thank you so much

[@kevinborden2477]

Impressive work Martin. Great Repair!!

[@dentremover01]

Thanks Kevin

[@LearnPDROnline]

It's a horrible feeling, I did similar on a BMW bootlid a few years back. Fixed a nasty dent right on the top edge but then in the final stages, tidying up the finish and with a metal knock down, I put 2 small chips in. I was gutted... Great repair though pal and thanks for sharing the good and the bad 👍🏻

[@dentremover01]

Thanks Tom. I remember you saying about that job! Who Dares Wins “sometimes”

[@Garage48-Andrei]

Good morning and afternoon. I am not a PDR master, but a tinsmith, although I study PDR repair myself and understand how difficult and responsible it is. I believe that you should not worry about the little things in the repair, which the client may not even see, because your work is done super well!!! p.s. I'm watching you and learning. A subscriber from Russia

[@massimo6770]

Hi Martin, as always you have done a great job. What matters is the end result, which is great. The little damage to the paint is just bad luck. I remember my teacher, who used to tell me that 'the best is the enemy of the good'... You’re still the number one!

[@dentremover01]

Thank you Massimo very kind of you. I’m only human I don’t glass every single repair and I mess quite a few up which is “Just Life” it’s a repair at the end of the day 🤷🏻‍♂️ thanks so much for watching and enjoying the video and commenting I always enjoy your comments 🙌🏼

[@channex8179]

Another cracking video mate, we all make mistakes sometimes at least your honest. There are too many rogue traders within the many fields of our industry. I aim to balls something up at least once a day it keeps me grounded lol

[@Francedsp.]

Amazing repair and amazing Job Martin 👏🏼👏🏼👏🏼 Very instructive 💪🏼

[@dentremover01]

Thank you kindly Francedsp

[@craigdeakin7956]

martin thats a cracking job there mate,I really love the video,s Thanks

[@dentremover01]

Hey Thanks Craig! Really appreciate your kind words and support

[@MTLJack]

amazing job sir. It is not your fault , Tesla paint are so bad that its not really good for PDR. Also, the used teslas resale value are so low its not even worth saving by PDR

[@dentremover01]

Thanks Jack lol! Appreciate your kindness

[@damianstones6975]

Unbelievable repair 👏🏻👏🏻👏🏻

[@dentremover01]

Thanks Damian

[@darrenm2371]

Thanks for another great repair video Martin

[@dentremover01]

Thank you Darren !

[@inversioneselexodo2360]

Excelente trabajo bro, eres un gran maestro....saludos Ruben Ibañez Guatemala

[@dentremover01]

obrigado Ruben, espero que as legendas funcionem ??

[@spencerwvcmoon]

Amazing repair very tricky .

[@dentremover01]

Thanks Spencer!

[@dentdetailpdr]

Nice repair and video mate

[@dentremover01]

Thanks Mr Tesla dent man Uk

[@billseay6399]

Looks good to me

[@dentremover01]

Hey Bill thank you for watching and commenting 🙌🏼

[@grantssmartrepairs]

great video mate 👍👍👍👍

[@billy2terranova]

wow !! amazing job and grat video!!

[@dentremover01]

Thanks Billy

[@victorbarranca2910]

outstanding, you are good.

[@dentremover01]

Thank you very much!

[@craigsmith4419]

Nice repair. 500 was a deal if thats the ballpark you charged.

[@cyrilsid5823]

Loving the videos!! where did you buy the white tap down with the leather tip?

[@alfredorecalde3528]

Que maestro!!! Gran trabajo y sienpre tus videos tan claros!! Saludos desde Argentina Martín!!👍👏👏👏

[@dentremover01]

Thank you so much for your kind words

[@SIHRA2]

Amazing job!!!! How long did that take you my brother?

[@nicoballini9005]

Complimenti!

[@dentremover01]

Thank you

[@williamlloyd3769]

Good nit of education!

[@dentremover01]

Thanks William 🙌🏼

[@oldgitsknowstuff]

So it wasn't written off then. EVs burst into flames 6 months after a little tap...so they say. Nice job though.

[@Brulserz]

500 pounds ? Kidding ,right?

[@dentremover01]

Yes and that’s very reasonable

[@Brulserz]

Sorry, but not in the real world.

[@dentremover01]

@Brulserz that’s cheap. See what the guys in USA charge

[@oldgitsknowstuff]

He means £500. Sterling not 500 Pounds weight.

[@Brulserz]

Wow, really?