2 жыл бұрын
Пікірлер
@Badassbass79 Күн бұрын
How far do you push the sea inl ?
@huntercumminsphotography8307 20 күн бұрын
Do you have a link for the t fitting at all?
@Out-Of-Alignment 20 күн бұрын
It's just a standard 1/4" NPT tee fitting. You can get one at any hardware store. There's a ton to choose from on Amazon too. Here's just the first one that popped up. a.co/d/ebIIHkv
@donwest5387 22 күн бұрын
or...a chest of drawers with the drawers the depth of the spray paint cans. leave the colored caps on
@donwest5387 22 күн бұрын
idea: put compression spring in hole saw to push out off cut(?)
@Badassbass79 28 күн бұрын
Was it 1 seal or 2? Was thier also one one the harmonic bal ? Becayse i have to change mine soon as i get the money.
@770Chase Ай бұрын
Have you ever had an issue with the heat not working after a coolant change? I'm wondering if I got air trapped in there somewhere. It isn't over heating though.
@Out-Of-Alignment Ай бұрын
I haven't had that issue, but if the car is not over heating, my first guess would be the heater core. You may have a blockage somewhere keeping the coolant from flowing through the heater core. The heater core has a couple of hoses that pass through the fire wall. There are some connectors on the hoses. Maybe crack the connectors to see if it's airlocked?
@terencekaye9948 3 ай бұрын
You don't know wgat your doing!
@RaceMentally 4 ай бұрын
Hello, just finished watching your entire build series. Loved it. How do I get in contact with you? Insta or FB?
@Out-Of-Alignment 4 ай бұрын
KZbin comments section is fine. I'm not much for social media.
@RaceMentally 4 ай бұрын
@@Out-Of-Alignment what was all in cost on that place? Property to final build? Also, is it pending currently? I’m wanting to build identical in AZ and CA. Care to share plans at all or help with the builds?
@Whitetrash_Customs 4 ай бұрын
1 &1/4" fitting???? You mean 1/4"?
@Out-Of-Alignment 4 ай бұрын
Yeah, 1/4"
@jv-nc7pw 5 ай бұрын
If you take just the last two bolts out, the calibers come out as on piece and reinstall as one piece.
@HuricaneB 5 ай бұрын
How did you remove the old seal?
@Out-Of-Alignment 5 ай бұрын
I just got the cheapest seal puller on Amazon and hooked one end and pried it out. Powerbuilt Seal Puller, Heavy-Duty Tool for Seal Removal, Easy Grip, Automotive, Mechanical, and DIY Application - Red 648494 a.co/d/dLfiPcB
@HuricaneB 5 ай бұрын
@@Out-Of-Alignment I've seen those and wondered if they work, so glad to know they do cause I need to replace my seal, wasn't sure if you could do it w/out pulling the cover. My harmonic balancer broke and I have already bought a new one but it ding the seal so I'm feeling pretty optimistic now! Thanks for the video you made my day!!
@Cutedge2 6 ай бұрын
Because I’m on the FAA Safety Team, I have to mention it. It’s illegal to fly rc Multirotors within 5 miles of an airport without filing a NOTAM, and especially over the runway. I fly jets off of that runway. And it gets the model airplane pilots in trouble that’s what caused us to have to pay the FAA and register our model planes and get remote ID put in them now because people are flying multirotors over runways. Especially that last shot was over the runway. You have a very nice hanger hope you get a good price for it. but stuff like that especially on KZbin is what’s getting that radio control airplane pilots in trouble. And we’re not the ones doing it.
@Out-Of-Alignment 6 ай бұрын
I was not the drone pilot, but I did question her before she started flying. She said she was registered with the FAA and had a lot more knowledge about the rules than me. She knew how high and where she could fly, and she had a radio tuned into the airport frequency. Once again, I'm not an expert on the rules, but she was a professional photographer and said she had shot drone footage at this airport before. If there is any additional concern, come over and talk to me. I can get you her contact information.
@Cutedge2 6 ай бұрын
OK well maybe she filed a NOTAM but it just never showed up. Definitely not your fault! We all wish the FAA would quit making useless regulations on everyone.
@brianworman1055 6 ай бұрын
I really enjoyed your build series! Your home turned out Great!
@dmcmaster3544 6 ай бұрын
Spectacular!
@mefmtx 6 ай бұрын
Wow! It's really beautiful. Nice job 👍🏻
@jeff11030 6 ай бұрын
Why did you cover your plate when 2 videos ago you gave us your full home address? Nice upgrade.
@Out-Of-Alignment 6 ай бұрын
Force of habit. Listed the address as the house is going up for sale.
@jv-nc7pw 6 ай бұрын
You may want to carry a cap to plug off the inlet in case the sender line breaks.
@Out-Of-Alignment 6 ай бұрын
Good idea. I'll keep an 1/8" npt plug in the glove compartment.
@jv-nc7pw 6 ай бұрын
Looks amazing. What a nice house with a super nice hanger/shop. High ceilings give it an open feeling. Big lot for adding any future structures. That upper loft area would allow you to double the house size with little effort. Such a nice property.
@hcr-motorworks 6 ай бұрын
As long as wherever your moving to involves land and living in a trailer while you design, plan, and build your next house im game for future episodes!
@Out-Of-Alignment 6 ай бұрын
While I haven't filmed any of it, construction on the next house has started. It will be a conventional stick frame home, but I am building a detached shop. Hopefully no travel trailers in my future, but you never know, ha!
@Dukeduke123-f1t 6 ай бұрын
Sir i like your design skills could you plz.share u r contact detail,,, i want design help please
@lindastreet-ely9780 6 ай бұрын
Thanks for the series. We were hoping to be neighbors, as our property is nearby. Best wishes to you and Kelly!
@Out-Of-Alignment 6 ай бұрын
I hope you got something out of the videos for your own build!
@lindastreet-ely9780 6 ай бұрын
@@Out-Of-Alignment We certainly did! Thank you so much!
@scannerson 6 ай бұрын
Thanks for the series. I’ve enjoyed each update.
@Out-Of-Alignment 6 ай бұрын
I'm glad you got something out of the videos. I enjoyed making them.
@4alphazulu 6 ай бұрын
I have been following this series of your build FOR YEARS. It even gave me some ideas should I build a hangar home. I really want to live with my plane someday. It looks amazing. I can only say that I am happy for your family and the new job for the wife - kind of sad I won't get to see any other updates from this build. It was definitely a great series. I watched some of the episodes during framing and electrical more than once. Thanks for a great run - hopefully you'll leave the videos up.
@Out-Of-Alignment 6 ай бұрын
Thanks for the kind words. I'm glad you got something out of the videos. I hope you get the chance to build your dream hangar some day.
@jeff11030 6 ай бұрын
I can echo the comments from above. I’ve watched every video at least once and several more than once. You were kind enough to answer my questions and even share the floor plans. I to am happy for Kelly’s new job, but sad you won’t be able to live in the house you spent so much time designing and building. I have always loved your house and admire your skills and dedication in building it up from plans to finishing home. Watching you and sometimes your dad helped me appreciate all the hard work you put into the project. I wish I could buy it! Good luck Zack, to you and Kelly. You should be very proud of your accomplishments. Jeff
@Dukeduke123-f1t 7 ай бұрын
Sir , I am from north dallas , texas i am impressed with your Design and plan skills .. i want connect you with.. could you please share your contact information
@Dukeduke123-f1t 7 ай бұрын
Sir , I am from north dallas , texas i am impressed with your Design and plan skills .. i want connect you with.. could you please share your contact information ...
@anthonymccartney2130 7 ай бұрын
Hey my name is AJ and I'm a street artist I use spray paint everyday of my life I call my art rattle can art cuz I don't tag walls or property I do it in canvas and poster bored I probably go through 300 bucks in spray paint a month and always have a few of every color I don't have all the tools you do to make the shop like you got, but I was wondering if you could send me off in the right direction to accomplish that goal
@Out-Of-Alignment 7 ай бұрын
The only "expensive" tools in this video were a table saw ($100 at a garage sale for mine) and a drill press ($40 at an estate sale for mine). You could easily do this with a circular hand saw and a normal power drill. Don't let lack of tools slow you down. Let whatever material you have on hand dictate the design. I didn't buy any material for this rack.
@dougbrun7789 7 ай бұрын
No lube on pad ears or glide pins
@wargboyz 7 ай бұрын
Nice video. Realy interesting. Please look at editing your audio, or investing in a better mic. There is a lot of compression on the high end and it hurts to listen to on headphones. Most likely you have the gain turned up too high, because the mic is too far away to keep it out of the camera shot. Better mic, or just put the mic in the shot, so you can get a stronger signal, and you won't have to boost as much. A little EQ will also help a lot with that.
@jv-nc7pw 7 ай бұрын
Where is the second one?
@stephendavis7812 7 ай бұрын
I hope that wall is not between your shop and your home...it will go up like napalm if there's a fire. Flammable items are best kept in fire proof cabinet if your home is above or attached to your shop. Less convenient and more expensive....but smart.
@brentking9263 8 ай бұрын
Where is ur airplane 😂😂😂
@30guarino 8 ай бұрын
this would be great for wine bottles.....as for the circles you can drill a center hole in each and glue about 7 on a rod. Spray adhesive , put sand paper around it and attach to your drill and have a spindle sander
@lancerussell3589 8 ай бұрын
I can't believe I watched this video only to find out that you didn't torque spec the crank bolt, I hope your not working on any of that aircraft!!!
@FixItWithMe 8 ай бұрын
A video teaching how to measure and cut the miters would be helpful! I just subscribed! :)
@Out-Of-Alignment 8 ай бұрын
Thanks for the subscription. This is a great video: kzbin.info/www/bejne/aGHUZHabe6yGY6M
@romanhamerski9192 8 ай бұрын
Thank you very much for your video.
@Out-Of-Alignment 8 ай бұрын
Hope it helps
@jeff11030 8 ай бұрын
You’re right, installing crown molding isn’t fun but yours came out looking great! Adds that “finished look” to the room. I admire your skills.
@mikenellis9238 9 ай бұрын
On another topic, are you finding the black roof to be excessively hot in the Texas summer?
@Out-Of-Alignment 8 ай бұрын
I actually haven't had a problem with it. It's got 2" of spray foam on the bottom, but there is a large mezzanine that separates the living area from the metal building roof. But, I think if I was going to do it over, I would go with just a white roof and keep the black trim. Some other hangars on the runway did that, and they look sharp.
@mikenellis9238 9 ай бұрын
I'm starting to build my own hanger home just SE of San Marcos, TX on a small runway with 14 lots. Re: the flooring, your system of laying the flooring (BTW, we have luxury tile in our current home and it's great) seems to have worked well but did you consider starting the first row at the center line and working outward? Since you'll be using baseboards, if there are any small variances the baseboard will cover them up.
@Out-Of-Alignment 8 ай бұрын
The planks I but down were a lot easier to install the way we did it with their locking mechanism. Trying to latch the underside in when the top piece was already down was a challenge. But, all the LVP options out there have different locking mechanisms, so maybe this is possible with other brands.
@owenzmortgage8273 9 ай бұрын
So you did it wrong from the beginning , your problem has nothing to do with pads. Wasting time.
@NotMe_NotMe 9 ай бұрын
I have had the same saw for 20 years. Great for scroll work and can cut anything within reason. So nice to have the bigger throat without using much shop space. It’s not for resawing (ha!). But i would not want to lose it. Between this and a 14” delta, i can do most anything. Do not dismiss this tool! And do use a thin blade (.025 or less, and “ultraflex” is a good idea)
@Out-Of-Alignment 9 ай бұрын
It's been a good little saw.I have metal cutting blade for it I have been meaning to try out.
@karenvick-n7s 9 ай бұрын
Great work
@Out-Of-Alignment 8 ай бұрын
Thank you so much 😀
@jeff11030 9 ай бұрын
Looks great Zack.
@Out-Of-Alignment 9 ай бұрын
Thanks!
@stickxxcummings 9 ай бұрын
Im hoping u get out of the wind
@SSterken 9 ай бұрын
This is a great idea. Just built some new shelves in my garage and was looking for better can storage and I like this idea. What were the measurements you went with? Obviously this can be build to any size needed but what did you end up going with and what angle did you lay the can holder out on? Thank you.
@Out-Of-Alignment 9 ай бұрын
I just used my hole saw that was one size bigger than a paint can. As for the angle, I just used what looks good, maybe 10°-15°. One side is up an inch higher is how I laid it out.
@jeff11030 9 ай бұрын
Looks good. I admire your skills. You have a great house in the perfect location.
@jeff11030 10 ай бұрын
Good save
@jv-nc7pw 10 ай бұрын
Did your wife help you with the trepanation?
@karenvick-n7s 10 ай бұрын
Great lesson
@jeff11030 10 ай бұрын
Welcome back. Probably looks easier to install than it really was. Looks very good so far. Sorry for your troubles with the bathroom tile, but you’ve overcome worse.
@Out-Of-Alignment 10 ай бұрын
Thanks, all in all, it turned out pretty good.
@FoxDuece 10 ай бұрын
Been watching this project for over a year… love the progression
@Out-Of-Alignment 10 ай бұрын
Glad you're enjoying the build series.