Just a heads up. You can rent the device at ORilleys and return so really just be out $8

Thank you so much for this video! You explained EVERYTHING so well! Also saved me some money!!!! Thank you!

My biggest problem is with the glue gun. It puts out a bit of glue and then stops like it's getting gunked up, and then there isn't enough to apply to the tab effectively. I haven't figured out what I'm doing wrong so far.

I just got my actual spare tire kit delivered today from Ford for $289.00

presumably this would work for motorcycles too?

Can you show a video where to plug in the flasher module

I have Polo 2015 can this be installed in it ?

Hey man have you done any more on the cougar?

Any plans to make a update vid on the 128? Love the videos btw

looks sweet

Excellent, thank you!❤

I have done this for my own car and two other cars in the family now thanks to this video! still coming in handy,thamk you

Why not use lacquer thinner on the rag also?

Why doesn't mine have an adjustment screw???

Great idea. Going to give a try...thanks

- I think it fits your VW really nice! 👌🏻

Mine never even bubbled like that

Anyone know where to order side skirts for a sportswagen? I have 2009 and I'm guessing the wagon is longer then the jetta ( rocker length)

Thanks

You just saved me so much trouble. Thank you!

Wow, I’m so glad I found this video. I’ve been having the same issue on my Corrado SLC since my VR6 was REBUILT after I drive the car and get up to normal operating temperature then turn the car off, the fans never go on. Do you think it’s a bad thermal fan switch? Also, they say that if you don’t have a low temperature thermostat and just put a low temp thermal fan switch in that your car will not run cooler and it will also waste more gas and cause your car to stall. Is this true?

Great job man, thank you so much for taking the time and walking through every step of this. What would you say this replacement costs compared to having it done at the dealer?

Can you please send me the tire name and size… I can’t find anything decent for a 19 in rim and here you are helping me with my oil change and making me jealous

Thanks for posting this video! I just ordered rear bumper fillers for my '77 Buick Regal from Replica Plastics, as the original ones are crumbling. Your advice will help me with my installation. I looked and looked all over the internet, and Replica Plastics was the only company I found that will make these fillers for my car. I hope it turns out as nice as your '73 Monte Carlo. Thanks again!

Thanks - A real result finding your video as was struggling by not knowing the pull handle had additional fixings 👍

Ive got someone trying to trade me this car. Didnt realize how crazy that engine bay was lol

Do you have the part number or link for the the replacement emblem?

just replaced it on mine, srill not kicking on

I used a 1/4 chisel to tap the bolts out. As soon as the torque was broke, it was easy turning them the rest of the way out. This video has been so helpful; thank you. Edit: My 2008 VW Jetta started! God bless you for posting this video.

Excellent video ! now i got my light working ! Thanks alot :)

The larger o ring can be soaked in gasoline for a few seconds. This lubricants the o ring so it can be slide over the injector into place.

A fuel injector tool is still made for pulling out injectors you can buy, making this job easy. Or if you see a picture of the tool online, one can easily be made with a piece of sheet metal. These o rings tend to get hard and need replacing every few years, so a must to have this tool in your tool box.

Thanks buddy!!

Duuuuuude TYSM 🎉❤ you DONE saved me a drive to the dealer for no reason , whenni called my dealer the person on the phone at service was absolutely no help 😅

Was the transmission dry when you did this? I didn't see any fluid come out. Mine appears to be leaking fluid but may only be when it's up to operating temperature. I redid the pan seal and still getting fluid on the pan seam but only below this.

Need help, for some reason when i adjust that screw it stays on 44.7 and doesnt even move a bit. Its driving me crazy

Great video Question... Can l the plastic engine cover be reinstalled? Looks like I will have to remove mine on my 2016 GT to install it. Don't know if the tower strut interfers with the removal. Any thoughts? Thanks

Thanks for the info - I want a cover like this.

Bought the tool on Amazon and it actually came with a new seal. Great instructional video. Looks like an easy job.

A small bottle of that blue stuff at Repco Australia costs $84!

Got dam man that was well explained great job bro !

The startup chime brought me back to my old 97 GTI. My then-GF thought I was a total dork but I loved the VW song.

This video is incredible. How well put together and easy to follow. Good job man

Nice ride! Wondering why you have the plexiglass over the cowl?

Without needing to depress the accelerator pedal overly exaggerated, just normal steady pressure through 2nd to 4th gears, it had a very pronounced beautiful rapidly crisp responsive acceleration behavior.

That car was the best car I've ever had. The one I had was a 1978, a station wagon (Brava Wagon 4-door). It had a 5-speed manual stick. The chairs were supremely comfortable. Very *wide* chair. It could corner in turns tabletop flat with absolutely no leaning. It had the most comfortable, interesting ambiance interior and cabin. My stick shift was not angled; it was straight down into the center console. It got about 30mpg. I bought it for 500 bucks (over 2 1/2 decades ago) and it started and ran without needing anything. I didn't even change the oil for 3 months, drive to work everyday as a tradesman, and drive it Saturday and Sunday too. 7 day a week daily driver. I was into buying a different 300-500 dollar used car every 12-15 months back then. I've owned 77 used cars in my life so far (since 15 years old) and 1 new car that has zero miles on the odometer, once.

If the problem is the section which the key goes into can’t you just remove that and replace without having to take everything apart? Or Is it generally the metal cylinder that is at fault? Mine is jamming /getting stuck mainly when I try to turn off ignition I have to wiggle the key in lots of ways and eventually it will turn off

What’s the link to the mounts you bought?

Those wheels are nice. But they are a bitch to keep clean.😊

That's a beautiful car. 😊