7 ай бұрын
11 ай бұрын
Жыл бұрын
Пікірлер
@mnomadvfx 2 күн бұрын
It needs something soft like silicone rubber around the edges of the moving part to prevent it making a noise when it snaps back together, and to properly seal it when closed. Trust me when I say we have one for each extractor fan in our house and: #1. They don't stop all the draft - not even close. #2. When the wind is above 25-30mph that thing will rattle back and forth A LOT. It does with ours and it's hella annoying.
@Endpoint101 2 күн бұрын
Agreed; having a thin o-ring of silicone rubber would be ideal, but I've not found one which has that. We also hear it tapping in high winds.. we reduce this by closing the door of the room with the extractor & that usually helps a lot.
@brothersofthebackrow 3 күн бұрын
where is the software found
@Endpoint101 3 күн бұрын
You can download it directly from Logitech's website
@DjGiluk 3 күн бұрын
Thanks for sharing, mine was the last one as well, now working again 👍🏻
@Endpoint101 3 күн бұрын
Mine too! It took me a while to realise that was the problem.. now I just tap it with my foot to make sure it's got a good seal :)
@DjGiluk 3 күн бұрын
@ you did well to work it out, my work around was titling it backwards and forwards multiple times and then it would of resealed 😂 and I would never turn it off until I was finished! Now I know 🫡 thanks again
@q3aki 4 күн бұрын
thnx for the answers - my colors were messedup, now it works!
@Endpoint101 4 күн бұрын
Great!! So glad it worked for you :)
@bradleejaymz 5 күн бұрын
Worked!
@Endpoint101 4 күн бұрын
Yessssss! Glad it worked for you :)
@Hussen-f8n 5 күн бұрын
Oo
@KrisClark-e4d 6 күн бұрын
Thanks for the video which answered my questions in particular what is the benefit in getting the adapter instead of just putting the drill bits directly into the screwdriver. Perfect.
@Endpoint101 6 күн бұрын
Glad you found it useful.. it was the kind of review I wanted when I was wondering why I should get the adapter, so I ended up doing what I wanted to see 😀
@dovinbaan9410 7 күн бұрын
Thank you very much!
@Endpoint101 5 күн бұрын
You're welcome! Peace and quiet :)
@Abdelkhalek9 8 күн бұрын
What the best upgrade for this model
@Endpoint101 4 күн бұрын
Best upgrade to put inside it, or to replace it?
@Abdelkhalek9 4 күн бұрын
@@Endpoint101 replace it i have celeron b820 170GHz and 4 GB Ram
@Endpoint101 4 күн бұрын
@@Abdelkhalek9 It'd depend on your budget really.. and what you want to use it for. I'd start with sites like Trusted Reviews to get an idea of what's good at various price points.
@vimalvayalikkada1024 8 күн бұрын
Thank u.. Helps a lot❤🎉
@Endpoint101 5 күн бұрын
You're welcome 😊
@beyyoudhhatim4932 10 күн бұрын
Thank youuu
@Endpoint101 5 күн бұрын
You're welcome!
@rheylew 10 күн бұрын
This video in INVALUABLE!! Easy to follow and literally brought all my laser guns back to life!! I used WD-40
@Endpoint101 5 күн бұрын
Brilliant! So glad it helped!! :)
@Johnthecube 12 күн бұрын
Can u do it without erasing the data? Most of the apps I have on my new iPad cost money and I don’t want to delete them while transferring the apps to my other iPad…
@Endpoint101 11 күн бұрын
Yes, the data isn't erased on the one you're copying from 🙂
@alexofficial36 12 күн бұрын
Very very thanK U My Problem Is solved❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@Endpoint101 12 күн бұрын
You're welcome :)
@alexofficial36 12 күн бұрын
@ ☺️
@ascalt7868 13 күн бұрын
Can you use the grommet hole?
@Endpoint101 13 күн бұрын
For the monitor stand to go through, or do you mean after modding the desk to fit the arm?
@flywithgaurav163 13 күн бұрын
You're my hero bro. You made my life so easy with such crisp and accurate video to set up my mouse with my ipad. All the best brother
@Endpoint101 13 күн бұрын
Awesome! Thank you for taking the time to comment 😊
@starsagar94 14 күн бұрын
@ my gamecube has the yellow, white and red cable. Behind the tv it looks like it has the ports. I need to know for sure before buying it 🙏
@starsagar94 14 күн бұрын
Can you play retro consoles like n64 or gamecube?
@Endpoint101 14 күн бұрын
As long as the console can output to composite, then this TV has composite connectors that should work with it
@starsagar94 14 күн бұрын
@ my gamecube has the yellow, white and red cable. Behind the tv it looks like it has the ports. I need to know for sure before buying it
@Endpoint101 14 күн бұрын
@@starsagar94 It does have ports for those, yes. Just double check the spec on the website you're buying from to make sure it mentions composite inputs, just in case they have a slightly different model from the one I've shown here.
@starsagar94 13 күн бұрын
@ i got the tv and it works!!!! Yes yes yes!
@Endpoint101 13 күн бұрын
@@starsagar94 Brilliant! Have a great retro game weekend!!
@starsagar94 14 күн бұрын
Can you play gamecube or retro consoles?
@Endpoint101 14 күн бұрын
As long as the console can output to composite, then this TV has composite connectors that should work with it.. check it out at 1:14
@starsagar94 14 күн бұрын
@@Endpoint101Gamecube would be Yellow (video) , red and white cable. Please is it possible you can confirm it will work? Look up gamecube connection on google. 🙏. Cause im planning to buy the tv
@CurvedSlightly 14 күн бұрын
Nice one brah!
@Endpoint101 14 күн бұрын
😊
@Muddy1033 15 күн бұрын
I lost 25,000 dollars on cs2
@Endpoint101 14 күн бұрын
Oh man, bad kitty!
@adrenaliner1916 15 күн бұрын
Merci pour ce tutoriel !
@adrenaliner1916 15 күн бұрын
Merci !
@kimmanhnguyen5981 17 күн бұрын
Thank you sir, you did help me🎉
@Endpoint101 17 күн бұрын
You're welcome 😊
@AYOADEGANIU 19 күн бұрын
Please i need help i change the picture setting to standard but it keep going back to dynamic after some minute😢
@naidruvbettadapur3283 19 күн бұрын
What app should i install to connect ps4 to Android via cable
@Endpoint101 19 күн бұрын
This one is great & has low latency; kzbin.info/www/bejne/bnTQfYBppZmSars
@sebastianobagnolo9276 20 күн бұрын
Tysm
@Endpoint101 20 күн бұрын
You're welcome.. I still really like using mine, rather than loathing the old style one that ended up rusting up so easily!
@ajaicopia9681 21 күн бұрын
What brand of thermal printer is that sir
@Endpoint101 21 күн бұрын
You can find it on AliExpress from Phomemo (which is the same name as the app).. but there are a tonne of companies selling it on sites like Facebook and Amazon, e.g. LabelCreate, ThermaNote, and CyberPrinty.
@pantherapixels 22 күн бұрын
Hey, 3 years later and very helpful for me. Thanks mate!
@Endpoint101 22 күн бұрын
Glad it's useful 😊
@TrudieWilliams 24 күн бұрын
Is there something similar for a cooker vent/ extractor fan ? My kitchen is freezing and when it rained it was coming in though the vent , until my husband fitted a different cover.Thank you.
@Endpoint101 24 күн бұрын
You could fit the backdraft shutter nearer the outside wall than where the extractor fan is.. that way you don't need to mess with the cooker hood, just go in from the outside wall. Just make sure you fit it the right way round! :)
@TrudieWilliams 24 күн бұрын
@@Endpoint101 ty for your help 👍
@AbhinavPrasad 25 күн бұрын
Hey! My sensor is working on my spin bike. But the reading only shows when i spin it backwards. What could be the issue?
@Endpoint101 25 күн бұрын
Has it always done that? I'd check the sensor in the same way I show in the video.. check it hasn't been dislodged somehow.
@trisa_artika 26 күн бұрын
What if I have XPro 2 camera?
@Endpoint101 26 күн бұрын
Look around the menus for a similar setting, or check your manual, or Google it specifically for your model 🙂
@123willbishop 28 күн бұрын
Useful video! My valve started doing the exact same last night, and have ordered the same part to see if this solves it. Will have a go at fitting it later 👍
@Endpoint101 28 күн бұрын
Awesome! I'm glad it was useful. Let us know how you get on 🙂
@123willbishop 27 күн бұрын
@ All sorted, was as straight forward as suggested in the video, and much quieter too! Cheers!
@Endpoint101 26 күн бұрын
So quiet, right?! When I first turned it on I thought I'd broken everything 😂 It was quite a rush when I realised it was all good and the motor was just silent.
@Endpoint101 26 күн бұрын
Btw, please ‘like’ this video if you haven’t already.. it really helps my channel 🥰
@Resistor.1 Ай бұрын
Thanks for the advice.
@Endpoint101 28 күн бұрын
No worries!
@cloudsong64-p4L Ай бұрын
Found a nickel in there which resolved the intermittent loud noise issue. Thank you for taking the time to make this video!
@Endpoint101 Ай бұрын
Brilliant.. So glad it helped 😊
@ChristopherStanton Ай бұрын
Hah, that 2k camera looks like it purely has a wide angle lens on it, and a sharpening filter! Look at the state of the bush at the end of the garden there, highlighting every leaf, and then at night you can see the noise on the sensor as it highlights what it can detect. The sensor seems very poor in comparison to the 1080p camera, feels like they've cheapened on the sensor and then tried to compensate for it with the lens and filter. Unfortunate.
@Endpoint101 Ай бұрын
It’s little wonder they cost almost the same 😉 Having no control over the bitrate also doesn’t help the situation. I still like the cameras.. they’re good for the price, but you just need to be ok with their limitations.
@Nose-r6c Ай бұрын
I have one of those but it doesn't move, it just makes its sound. 😢
@Endpoint101 17 күн бұрын
😢
@ColinDH12345 Ай бұрын
Using the spanner the wrong way around. I can hear my grandfather (engineer) turning in his grave 🙂
@Endpoint101 Ай бұрын
Oh interesting! I didn't even realise you should use it the other way! Thanks!!
@ColinDH12345 Ай бұрын
@@Endpoint101 That's OK. It's designed to mimic your thumb (adjustable bit) and first finger (fixed bit). You push with your thumb. Doesn't slip off that way ;-)
@Endpoint101 Ай бұрын
@@ColinDH12345 Awesome; I always thought it was my cheap spanner that was the problem! 😂
@konLVdon Ай бұрын
does it work on bank apps or WhatsApp?
@Endpoint101 Ай бұрын
Like a call on WhatsApp?
@ladyg6549 Ай бұрын
no think in the settings to say how to change the time,what a useless phone
@ladyg6549 Ай бұрын
i cant see any where to change the time
@ladyg6549 Ай бұрын
how do i get the right time up
@kohlerk30 Ай бұрын
thank you.
@Endpoint101 28 күн бұрын
You're welcome
@SherylMcintosh-s8r Ай бұрын
What does CAL mean?
@Endpoint101 Ай бұрын
It's not a code I've seen. Is it not in the manual?
@alastairferris247 Ай бұрын
mate you're a genius
@Elysewoodmusic Ай бұрын
Hey! This is a longshot, but I recently got the same model at a thrift store, and I'm looking into modding it similar to yours. Is it possible for you to upload the final result?
@Endpoint101 Ай бұрын
Hi! I never got around to creating a final look at the result. I do have a few pictures of it from Oct 2022 but intended to do a video showing it in action, together with how to set the screen orientation. Due to the low number of views on the series I guess I lost enthusiasm, but really should do a Part 6 to finish it off! I'll see whether I can put something together, so hit Subscribe & you'll get notified on my uploads. In the mean time, the other parts give you what you need to do this mod yourself, but feel free to ask questions if you hit anything you want a hand with.
@Roolenstein Ай бұрын
REEEEEEE!
@ingmatuss4163 Ай бұрын
Nice one
@Endpoint101 Ай бұрын
Glad you liked it; I found the designs so useful in Phase 4 & 5!
@conseilnumTL21 Ай бұрын
Many thx!!! I needed to know the exact motion of the blades to undertstand why my hedge trimmer is not working anymore...
@Endpoint101 Ай бұрын
You're welcome; glad it might be useful :)
@alloydcyber557 Ай бұрын
What picture setting did you have it on? Dynamic is fine but standard and natural are way to dark and movie is awful.
@Endpoint101 Ай бұрын
Check out this video for the settings I'm using; kzbin.info/www/bejne/Y5eyaquJqqySr6s