I keep having issues with leveling that no matter what i set it to the filament gets flattened and alot of it just sticks on to the nozzle making a mess on it and not sure what i could do next
@zaneellzey10845 сағат бұрын
You solved my problem! Didn't know to push the little extruder lever on the left to 'unlock' the feed... Did that, pushed a piece of filament through and the broken part came out. THANK YOU!
@alarcon996 сағат бұрын
Best explanation by far! Bambulab should have your video on their site. Thank u!!🙏
@Thunder-YouTube9 сағат бұрын
Thank you so much I replaced filaments after there was a problem with the filament ripping and then I thought it would just go back in once I pushed it back in and it got clogged instead, and I was freaking out until this
@Rakshasa8415 сағат бұрын
Thank you very much for this! I realized the other day that the maintenance reminders hadn't popped up in over a month or so. Today I decided to hunt for a video that went over this whole process in better detail and so I can set a schedule to make sure I never miss it again. This was absolutely perfect for someone who is still quite new to maintaining these devices. Thank you so much for the clarity, and showing not only the tools but how to use them. You left nothing open to interpretation which I greatly appreciate.
@nickmarugg8972Күн бұрын
Thank you for keeping me from strapping 50lbs of tannerite to my Ender5 and sending it into the stratosphere! Outstanding video and very informative!
@darkoverlord4447Күн бұрын
Thank you so much for this, first time dipping into 3D Printing and you’ve made it feel so less daunting 🙏🏻
@garrettw5166Күн бұрын
After a year of resin printing I found out I am highly allergic to it. It makes my heart soar to know that I can print this quality now on FDM.
@Tombof3DPrintedHorrorsКүн бұрын
I worked with resins in my previous career and can barely be around them now as well, which is why I focus on FDM :)
@DM-H_ogКүн бұрын
In regard to the Bambu A1 Mini, about how many minis can you print with one spool? The size range of 1 inch miniatures for D&D. I see you printing your minis one at a time, is it okay to print multiple at a time?
@Tombof3DPrintedHorrorsКүн бұрын
Probably 150-200, depending on the exact minis being printed. Multiples will decrease quality slightly and increase chances for failures.
@mattdagger1480Күн бұрын
I only use WD40 specialist silicone lube personally on all my printers no issues. Wd40 is a company as well as a spray. But the silicone wd40 is amazing
@Rabid_Rat431Күн бұрын
I got my V3 SE about two months ago and I have never checked those settings. I checked them and they are set to your recommendations. I guess they listened to you.
@TrepTheSnakeКүн бұрын
Does sunlu pla+ works well??
@TronsTableTopКүн бұрын
This is an excellent video. So informative. Recently got an a1 myself so hoping to get similar results. Only problem I'm facing atm is getting the sunlu meta pla.
@xgoofygaming77912 күн бұрын
Hi so I have a question about the ender 3 v2 so I’ve already built it but have no clue how to connect it to my computer to print things
@chickenmybobbers10732 күн бұрын
Amazingly helpful, thank you so much!
@Aslan8819772 күн бұрын
This was so informative. It’s also the closest to my issue. Idk why this has happened but when I went to take a spool off my AMS my filament broke off. I was able to pull on the filament from the and side but it also broke to where that end was now unable to be reached inside the “Bowden” tube. I then went over to the extruder side and did the same thing and again it broke to where it’s inside the “Bowden” tube. I then it on a new color hoping it would push the stuck filament through but it won’t. Please help.
@DboyinDtown2 күн бұрын
Great production. Well done
@jacobscheiderer81892 күн бұрын
Had this printer for a year now and have never run into this problem until today. Very glad I found your video! Solved my issue and we were using the same kind of filament it appears! Thanks man!
@TimBrennan2 күн бұрын
Thanks for the tip
@MaxouSenpai063 күн бұрын
HI I got mine today ! And this my first printer ! I clugged it just after printing the little boat ! I managed to unclog mine using everything in this video AND getting the hot end to 250 and poking in with a guitar cord ! And now everything is fine! Hope i can help someone else !
@bootchoo963 күн бұрын
Finally ! Man, i was about to give up but this video saved me
@Molodingdong3 күн бұрын
Thank you so much! This was my first pribter and after 108 hours of printing it clogged. I though it was broken and was scared for a while! 😮😅 Thankfully your video saved me! P.S. You earned yourself a new sub and got liked!
@pacod7_kny4513 күн бұрын
I love you
@thepenismightier3 күн бұрын
Thank you for contributing so much to the community.
@arturcymerman_pl3 күн бұрын
Thank You! After 3 hours of swearing at ams (I am new to the 3d printing topic) I found this movie and helped in 10 minutes... Like and Sub button pushed... 😀
@phoenixhazard4 күн бұрын
How does sunlo compare to Bambu PLA?
@Tombof3DPrintedHorrors4 күн бұрын
Sunlu Meta is better IMHO.
@c.miller48844 күн бұрын
Thank you, this is great information to have!
@MickeyintheMiddle4 күн бұрын
Thank you very much. I appreciate it very much.
@magarcan5 күн бұрын
What is the A1_Mini_cap.stl file included in the download used for?
@Tombof3DPrintedHorrors5 күн бұрын
Watch my A1 mini assembly video for details. It may no longer be needed if BL has fixed a wiring issue since then.
@larrythedoc6 күн бұрын
Thank you so much. I haven't tested it out yet, but this is what my printer was struggling with and these changes look like they will work. Thank you.
@noliverk6 күн бұрын
Thank you for the comparison.
@niconapalm6 күн бұрын
your videos are an amazing resource, thank you
@diverspudph6 күн бұрын
Thank you!
@dmcalonan13596 күн бұрын
Thank you, trying on a ender 3 s1 all linear and ceramic hot head. It doesnt work as adaptive layers are taken away in cura 5.9, profiles seem to work in 5.8, do I still need to create a generic printer?
@claudiubanu63616 күн бұрын
The plastic cover below the plate is one of the weakest parts of this printer. Terrible engineering.
@shanesingleton9786 күн бұрын
I don't even have this model and I'm like a minute in, but I can just tell this will be a good useful video
@jamesannuzzi1986 күн бұрын
do you need to reset the temp that was changed during the removal process?
@eddiezetlein65826 күн бұрын
And Da Da it really works. Beautifully smooth and detailed prints now.
@MateuszAdamczyk6 күн бұрын
I’ve bought A1 mini and sunlu meta. It printed 2 minis beautifully with your profile, but after few weeks it mostly clogs my nozzle. I would say that bambu lab pla is more resilient and will not suffer as much from hard conditions (mine printer stands in a room with a washing machine for better ventilation).
@lucianbalan53666 күн бұрын
really glad I got to this video!
@TheGlitterMan7 күн бұрын
Thank you for this insight.
@bonita23117 күн бұрын
It keeps resetting even though i store configuration. This printer does it's own thing
@sushii64527 күн бұрын
Hey I can't move my z offset while printing anymore. I can change the numbers as I want but it doesn´t change. Any Tips? Worked fine before I changed the nozzle
@martinpitts18 күн бұрын
Been trying to figure out the best way to get into that ams hub and never noticed that clip. Thank you for this!
@phillipg15888 күн бұрын
Not sure why you have picked such low speed/acceleration speeds when I have read that 2400 is the "go to". In any case, did you manage to find a good "sweet spot" in your settings ??
@GG-YOUTUBE8 күн бұрын
Thank you so much you just got another sub❤
@pxlwiz4u8 күн бұрын
First time viewer. Great videos thank you
@Tombof3DPrintedHorrors8 күн бұрын
Welcome!
@theskids68 күн бұрын
Again, this is such a helpful video. Thank you so much for taking the time to share your well-informed advice.
@theskids68 күн бұрын
Thank you. This was really helpful like all of your videos. Just got the hang of the v2 neo thanks to your videos and wanted to get another for my students but creality have stopped supplying them in the UK so this looks like a good, similarly priced alternative.