jED

Пікірлер

@potsy9973 12 сағат бұрын

Hella sexy, minus the bash guards. My Shimano detailer and 1x8 set works perfectly awesome and has an indestructible feel, its among the best I had generally. I can't always justify upgrades but they make it harder and harder not to spring primarily for athletics not functionality. I don't need to be the flasher neither but dang that's nice.

@Benjamin-ow7po Күн бұрын

Just pit these on my calling after seeing this review. They are the bee's knees. New england, wet roots,wet and dry rocks with and without moss, muddy puddles,hardpack,loose rock,baby head rock gardens galore, climbing and descending trickling ravines, connecting roads. Bee's. Knees. Cheers! 👍

@jedmtb 14 сағат бұрын

Thanks! Sounds like some fun terrain :)

@lakaldrak 2 күн бұрын

First one still the best. Hate the new controller.

@jedmtb 2 күн бұрын

@@lakaldrak Do you use the original AXS paddle or the rocker paddle?

@lakaldrak 2 күн бұрын

@@jedmtb yes the original. Faster shifting for me. Rocker paddle has to much play so i changed to Standard.

@diegao83 2 күн бұрын

Been looking for that elusive upgrade kit. Haven’t found it so far. Any tips on where to find it? Riding my pod with a button missing for like 6 months . I hate it .

@jedmtb 2 күн бұрын

@@diegao83 Looks like the upgrades kits aren’t available till August unfortunately.

@diegao83 2 күн бұрын

@@jedmtb sadness intensifies … lol Thanks 🙏🏻

@starskyloveshutch 3 күн бұрын

I’m be had one about a month and so pleased with it . Was never taken by the up and down buttons controller

@flaviogrivetsss6971 7 күн бұрын

Is it safe to ride the bike even if it creaks?

@jedmtb 7 күн бұрын

Yes, I think of it like a creaky door, it works fine it’s just annoying.

@flaviogrivetsss6971 7 күн бұрын

@@jedmtb thx, I'm already trying your method but on the steerer tube because I think the creak is coming from there

@gunshipanropace2gunshipand119 8 күн бұрын

Hello i'm planning to upgrade my XT M8100 Crank to XTR's, I have a 52mm Chainline BB Shell Measurement of 68. Should i Buy the M9100 or the M9120, Thanks so Much

@jedmtb 8 күн бұрын

I would go with the M9120 as it has a similar Q-Factor (168mm) vs the XT’s 172mm

@fra93ilgrande 14 күн бұрын

I have this exact crankset on my XC, it’s so beautiful 😍

@thumbsdownmtbyoutubers 16 күн бұрын

Do the tilt adapters work with the Zeb bracket?

@jedmtb 13 күн бұрын

No, the ZEB bracket holds the guard at the best angle for tyre clearance.

@curveball9999 17 күн бұрын

You da** Brits need to pronounce your words CLEARLY so that people around the world can understand what the hell you're saying. Good grief. I have to go back and repeatedly replay segments to try and discern what words you're using

@MCUPW 17 күн бұрын

It actually looks really cool with the curved bars. Gonna get me some of those

@ignaciova2959 19 күн бұрын

did you use 31.8 or 35 mm stem ?

@jedmtb 18 күн бұрын

I use a 35mm x 35mm stem.

@ignaciova2959 15 күн бұрын

@@jedmtb thank you so much

@aizixlv 20 күн бұрын

Rode my new Polygon T8 with Fox 32s less than a week an creaking started

@jameswilson2815 20 күн бұрын

Nothing a full service won't cure.

@jedmtb 16 күн бұрын

Depends on the issue, RockShox removed the sag indicators from its newer forks making it harder to spot.

@douglasguardado9626 26 күн бұрын

Do you have the part number for the rear rotor adapter? I just purchased the same rotors but I’m having problems getting the right mount for the rear, thx

@jedmtb 26 күн бұрын

I used the HBMM but here is the chart so you can check which you need. www.hopetech.com/_repository/1/documents/BrakeAdaptorChart2021.pdf

@emteebee1872 Ай бұрын

I have a 2023 Fox 38 factory… the fix I made was to let out all the air > insert a small zip tie between the seal and stanchion on both sides as mentioned in this video > pull up the handlebar while sitting on the front wheel > push it down a bit for a couple seconds > pull the handlebar back up… do this about 5 times. And on the 6th time of pulling the handlebar up, hold it for as long as you can, even trying to pull it higher than in previous tries. It should eventually release or remove some air (I couldn’t tell which one happened)… once this happens, start pumping air every 50psi and cycle through a few times. Hope this helps anyone.

@Onlydansmtb Ай бұрын

Ive ran Ride High 38 on both my bikes, KSL and Nomad 5, ive found them good over the couple year i ran them but latley ive been playing around with reach a bit, and want to try somthing different like Renthal bars with a more relaxed sweep as i find im getting arm pump alot at the minute.

@Eric.V. Ай бұрын

Pivot still uses press-fit bottom brackets?

@jedmtb Ай бұрын

Yes unfortunately they do.

@DK-wd8ju Ай бұрын

What happen to the review?

@jedmtb Ай бұрын

I’m still working on it, I’ve had a few technical issues with my pc which have delayed it.

@milo32123 Ай бұрын

Such good looking parts. I'm definitely getting the polished combo cause bling bling.

@Pienimusta Ай бұрын

I had no idea how to operate that "updated" version on new Lyrik. Thanks!

@Blank3k Ай бұрын

I also purchased a Zeb with this screw caps, I was very confused as they are solid... So should we leave them allen-key tight or can be have them thumb tight? Seems a bit strange for such a quick/convenient feature to now need a stop and break out the multi tool situations to utilise it.

@jedmtb Ай бұрын

I’ve just left mine thumb tight and they’ve been fine. I assume the legal/licensing bill was too steep from Fox to continue using the buttons.

@tonyparkin3379 Ай бұрын

Cheers brochaco. I have the same issue. Feels like I'm being pulled off my seat

@SylvainProov Ай бұрын

Really nice review dude & Great video quality ! those brakes looks really gorgeous. I think they will be my next brakes. You had the SRAM Code RSC before them ? why you changed ? I also have Code RSC, i'm happy with them but the centerline rotors are too thin, they always bent. And maybe they're a bit slow since a recently big MTB Week end (4 days / 4700D+). Dunno if i have to purge the front one (i have the bike for 3 months now). Also wondering between the gold & silver version on a mint color bike (SCOR 4060 ST GX Mint)

@jedmtb Ай бұрын

Thanks! I still use the Code RSC’s on another bike but with 2.3mm rotors now, normally just need to clean the pistons after a big week like that. The SCOR 4060 is nice bike 👌

@SylvainProov Ай бұрын

@@jedmtb oh, the 2,3mm rotors fits ? good to know, thanks again dud ! Yeah the SCOR is really wonderful, I always have the smile when I ride it :p

@jedmtb Ай бұрын

@@SylvainProov Yes they do, I’m using the Hope ones and my friend has a set of TRP’s with his codes.

@SylvainProov Ай бұрын

@@jedmtb nice ! i was looking at Hope & TRP rotors. Which TRP model ur friend is using ? floatting or fixed ? Yesterday i did a perfect caliper alignement, but the pistons don't come out exactly the same ^^' i'll do the piston service this evening ;)

@jedmtb Ай бұрын

@@SylvainProov He is using R1 S01E fixed rotors but I believe they’ve been discontinued for the new S05E ones.

@maxbergqvist9912 Ай бұрын

Thank you! My ZEB fork got this problem! Worked after maxing the PSI and pushing it. Then i emptied it all out and pumed it up my normal PSI again. Now its up and running! Nice video

@mirjamhoss2923 Ай бұрын

Show, don't tell!

@guillaume8356 Ай бұрын

Thanks for your vidéo, it's a beautiful build. What is the weight of the bike?

@jedmtb Ай бұрын

Hi, the bike is 37lbs.Thanks

@frankschock9981 Ай бұрын

I can't budge that 8mm bolt to remove my cranks even with a breaker bar

@noahstehn224 Ай бұрын

Thank you so much My rock shox pike (baught it used) was creaking like crazy and this fixed it😊

@Bixbysayshi Ай бұрын

I'm sure you've tried this, but just in case you haven't, if you fully close your rebound adjustment, you can often times remove the spring with no problem even while the bearing upgrade is on. the rebound knob itself unthreads from the eyelet body when opening the rebound adjustment, so closing it moves the knob close to the eyelet body and can make JUST enough room to remove the spring. I was furious when I first got my super deluxe coil equipped rocky mountain Slayer that has bearings and I though I couldn't change my coil without disasembling the bearings, but lo and behold it is possible!

@jedmtb Ай бұрын

I didn’t know that, I’ll give it a try when I next change the spring. Very helpful thank you.

@Bixbysayshi Ай бұрын

@@jedmtb Let me know if it works! because to be fair, i have the rocky mountain made bearing hardware, so it may or may not work on the rockshox hardware. and that's good info to know!

@markmiller37482 Ай бұрын

Your mention of previous gen is the axs drivetrain not the axs transmission? I was thinking you were comparing some new xo to an older xo transmission

@jedmtb Ай бұрын

Yes the axs X01 drivetrain, my apologies if it wasn’t clear.

@reygacutan3018 2 ай бұрын

my xtr M9120 crankset is in perfect alignment but the non drive side seems need more extra spacer

@jedmtb 2 ай бұрын

Have you installed the spacer and ring on the nds? Item 5 as shown in this exploded diagram dassets.shimano.com/content/dam/global/cg1SHICCycling/final/ev/ev/EV-FC-M9120-4379B.pdf

@reygacutan3018 2 ай бұрын

@@jedmtb do i need to change my bottom bracket? I did not change my original (shimano BB 71 press fit) on my canyon lux trail cf6

@jedmtb 2 ай бұрын

@@reygacutan3018 You shouldn’t need to but might be worth asking canyon what they recommend.

@dropkick127 2 ай бұрын

Awesome

@dropkick127 2 ай бұрын

Well done

@adrianTNT 2 ай бұрын

So the DH one is more compact ? I want to use it with a few small cogs (around 13T-18T) which one should I get ?

@jedmtb 2 ай бұрын

They are the same size, the difference is the B-link or bracket axle unit as Shimano call it. For the size cogs you’ve mentioned you’d want the DH one.

@eddiedempsey494 2 ай бұрын

Did you leave them at 800 or cut them. I have just ordered the same handlebar from Alltricks ,cant wait to try it on my orbea rise

@jedmtb 2 ай бұрын

I left them at 800, the rise is a nice bike.

@SirTubeALotMore 2 ай бұрын

It does not say in the manual which directions for the 8mm Allen ... I guess it's normal threaded?

@jedmtb 2 ай бұрын

Hi, it’s standard thread, right to tighten and left to loosen. It can be very hard to remove

@AFV85 2 ай бұрын

Do u think this is better than RRP V2.

@jedmtb 2 ай бұрын

In terms of performance, they are very similar so I’d pick whichever you prefer based on looks and price.

@romaineoconnor5574 2 ай бұрын

The new braided cable is the same size as the standard black cable the olive slips right on to no need to cut the outer plastic anymore

@tjwarth344 2 ай бұрын

My fork started doing it after three rides on a brand new bike!! Looks like I’m getting ahold of canyon!!!

@jedmtb 2 ай бұрын

That sucks, hopefully canyon can get things sorted for you.

@Skizm_admin 2 ай бұрын

Literally nobody prefers to leave the gripper studs out.

@anthonyg.6302 2 ай бұрын

wagwan great vid bruv

@tarekmakhlouf6100 2 ай бұрын

Hello- did you buy the garmin mount a or b ? Thank you!

@jedmtb 2 ай бұрын

Hello, I have the type A mount.

@user-nn4wj8gk9s 2 ай бұрын

My f20 bearings failed at 250 miles.no help from hope they thought I was trying it on I recon. Re built them and at 800 miles the same side bearing completely failed.the pedal actually fell off because off bearing failure.i guess i just had a bad one .luckily no injuries. In the bin and on renthal now.sad to get shit stuff and no help

@jedmtb 2 ай бұрын

Sucks to hear you had a bad experience with your set, the Renthal’s look like a great pedal.

@peterweinhandl5002 3 ай бұрын

I just received my Lyrik Ultimate (April 2024) and it came with the new dial version as well. I ordered a set of the fart buttons anyway, but was disappointed that this needed to be ordered separately. Also, it did not come with rubber covers for those buttons, wonder if the new buttons I ordered will come with rubber covers. Thanks for the video.

@kam1l0 3 ай бұрын

Very nice !

@lozetchells9164 3 ай бұрын

Nice video, well made and very useful. Have the V1 on my Levo. Cracking mudguard, great protection and looks cool af.

@darrencable1934 3 ай бұрын

Recommend a drop of blue loctite on the screws. They can work loose with the vibrations.

@craigbromley9327 3 ай бұрын

🤟

@Icamas 3 ай бұрын

I wish they made a manitou version. Had a version of it on my last few forks. The Mezzer is so good though

Ең жақсы KZbin

Пікірлер