Thanks for the review.

Great work will try to make one

PAINT IT ORANGE

Thanks, the "weak spring" fix did the job! Be warned folks when disassembling this thing: you *will* lose the tiny spring, and it is incredibly hard to see since it looks the same as a stray beard hair.

Original color was better..Your work is great but the black door is terrible..

I fooled around trying many different binders/fillers for many different repairs including sodium bicarbonate which came in 2nd place for me depending on what I am using it for. I believe in my opinion at least that cigarette ash works best for hardness. I thought ash is ash, so I tried several different kinds of ash including paper and wood ash, but the cigarette ash seems to be the strongest/hardest. Kind of like the Mohs scale that measures rock hardness. I have not specifically used an activator but when I want a quick set, I spray a cheap 50% or higher isopropyl alcohol on it to make it set instantly. I wipe my tip really quick so as not to stick, with a rag or paper towel or pretty much anything within reach. The point is always wipe quickly the tip after each use. Moisture/Humidity causes the glue to set, and moisture wears on the glue as well so for maintaining the unused glue life store it in a dry place. Notice many people mention the refrigerator for storing, that's because refrigerators remove moisture. I always keep open cookies and crackers in the refrigerator for the same reason. [[[i

Saved for when I tackle this project. Who made the white oak doors? Thank you!

If I understand correctly. You don’t need the WiFi version if you use Apple Home and have a home hub in Bluetooth range. Saves you $100 and extends battery life.

Just take a sheet of cooking alfoil and keep cutting till sharp easy.

As a electrician for over forty years a properly installed wire nut is by far the safest !

I FIXED IT!! Thanks you for this content!!!

Save your money! Skip Schluter and only use the liquid applied waterproofing!!! It’s all I’ve used in the 12 showers I’ve built!

Ce limba vorbesti barbosule ? Noi romani vorbim romanesti oare tu sti romaneste de ce ne obligi pe noi da stim limba ta

Thanks so much great help.

Excellent. Thanks

Where can I get those clips for the metal ruler???

Schuyler does not prevent leaks, that dude in the KZbin videos “not you Sir” needs to show his two days certification of graduation before he makes videos. The bread and butter of Schuyler kerdi is designed to sit in between the plastic sealing all-set or thinset. The thinset is the sealant not the roll of kerdi or kerdi band. The porous surface in the kerdi is to allow the bonding between the thinset you apply under the kerdi sheets and the later you apply for tile. One main cause of leaks to cut it short: is uneven surfaces, not applying enough allset, or siam in between the kerdi thinset and the flange or the lip of shower pan.

Great project video. Sadly i don't have any of the machine tools you have. Any chance you could make a video using simple hand tools and a vice?

Super Idee die Firma in das Band zu machen und der Knoten ist auch mega cool 😍 vielen Dank für dein Video 🙏👍

If I buy this product, can I use it on a property located in Argentina?

Great video. By the way, you sound exactly like Andy Rooney.

Schlage, would have replaced the lock but frankly your suggested spring alignment fix was easier. Thank you!

HELLO CRANE , YEARS AGO MY OLD MAN HAD A 3 GAL. OUTBOARD GAS TANK , THE OUTSIDE WAS IN GREAT CONDITION BUT THE INSIDE HAD A FILM OF RUST , HE PUT SOME AQUARIUM GRAVEL AND A LITTLE GASOLINE IN , EVER TIME HE WALKWED BY HE SHOOK IT FOR A MINUTE , AFTER A WEEK IT LOOKED BRAND NEW

I wish I could look at this video... But the horrific sound when you sand the scissors make it impossible 😢

Looks Great...Thank You for sharing ! 😊

There are thousands of kerdi showers holding up just fine. I personally know of 1 that was done 17 years ago and not a leak at all. As far as a steam shower, they tell you kerdi isn't meant for steam showers because of the perm rating. That's on you for not following the directions. Also, kerdi isnt designed to make a tub out of it. It's designed for a shower and sheding water.

I've been having this exact issue, and changing the battery would help a tiny bit, but it was still super sloppy. Adjusting the spring like you said worked PERFECTLY, and the lock works 100% of the time now. Such a relief. Thank you!

You should have just used latticrete membrane in the first place. Thats all you would have need for the steam shower.

Muito bom este vídeo!

Thanks for that. I am struggling with an Albrecht-type keyless chuck where the spindle is stuck. It is fully wound into the body and won't unwind out. I know it's a left hand thread. Do you have any suggestions for a remedy?

Great Video! Very informative. Thank you, Sir!

Nice job Jon! I jumped over from Scout Crafter to check out your channel, and I watched this old vid as I am attempting to get my own garage/shop/tool/supply area organized. Now I realize that my cause is lost after seeing your level of expertise, so I'm going tone down my expectations for my own space LOL

Nice list! Cooking Taylor ham requires a pac man notch - either knife or scissors, no specialty tool needed.

“Over to Seattle” instantly knew you were from west side of the sound 😅

My lock does that, but... it will stop working for a few hours and spins freely (all the lights and beeps happen as normal) but then the next day it works correct again for a while. I'm going to phone Schlage and see what they say, because it's still under warranty.

There's other places you can purchase these for around 10.95 each. Anyhow thanks for another great video!

Right on 👍

Thank you so much for the help here. I've been fighting the same problem (mine has a handle) and I took it apart as you showed and reseated the spring and it's better then new. Amazing how simple that fix was. Thanks so much!!!

If the hole is drilled off at an angle it is most important to tap the hole at the same angle as it was drilled. Otherwise the tap will be unequally loaded as it tries to cut through. Increasing the chance of tap breakage.

I still use your pattern, all my men love the size and material

*💥👍🏻💥 You have a video where you put Legs on this Table?*

I have at least a dozen tapes hanging around the shop. I can never seem to find one when I need it. I have learned a lot from you today, Thanks.

Edward scissorshands needs to watch this video. :) Thanks. Now I know how to do it right 👍

There is a screw there for a reason, makes it easy to take apart to sharpen and have nothing flopping about. smh

Unsaid but crucial is shown by the original maching marks perpendicular to the cutting edge. The filing in the video is at an angle rather than following the original machining marks. Okay, but less effective. The sharp edge is important, but the slight bur on the cutting edge grips the fabric stationary so the sharp edged shear the fabric. Without the slight hrabbinh bur the shearing action simply pushes the fabric rather yhan cutting.

Thank you for this! My 16-year-old son and I were able to fix our lock. The error I made was that after I watched your video & fixed the pin & spring that was mis-positioned, I installed it back with the deadbolt in the "out" position. Which humorously allowed us to press "schlage button" turn, and it unlocked without a code! My son solved it, looked at it, and said Mom I think you installed it with the bolt out, sure enough, he was correct.

Excellent video. Fixed. Many thanks.

Since you're gonna take the chuck apart anyway, couldn't you drive it with a punch from the other side, maybe adding a little heat to help?

Zakir Hussain passed away... End of an era..

Fantastic job on the models. and thanks for killing the 4way switch, for science... it's death was not in vain. :)