Would you happen to want a Gen Loss MK2 from the states for your clean? You probably have one. 😂
@SONWUКүн бұрын
Hey, thanks for the offer. I'll wait a little and see if someone wants to trade for a Thermae first. If not, I'll think about it, okay? Is it new? In Japan?
@kitesponganКүн бұрын
Ah yes Clean! I want that the most!
@kitesponganКүн бұрын
Ah yes Clean! I want that the most!
@klangfarben-y5fКүн бұрын
Viel Freude damit :) Ich warte noch auf meine Box 🙈
@SONWUКүн бұрын
Danke :) und viel Glück!
@NotOnlyVideoGuyКүн бұрын
Nice
@SONWUКүн бұрын
Thanks!
@joblo-n3bКүн бұрын
I bought both and never looked back. I play with the medieval one more though as the sounds are fun.
@vitafloКүн бұрын
You're right about the new MPC's, they do everything, which can be too much and is why I still use my old MPC 1000 and haven't upgraded. So I appreciate the comparison of the Tracker+ as a nod to the old school. And as someone who used to use trackers on my Atari ST this seems like the perfect mix for someone like myself.
@mstacksКүн бұрын
Love the vid! Question, is there a way to edit multiple trig locks at once? Like if I have a kick on the 1 and 13. Could I edit kick on 1 and have it also effect the kick on 13 without copying it over?
@SONWUКүн бұрын
Short answer no…long answer, you can edit multiple steps by holding them all down, then adjusting parameters (but that usually only works when they are relatively close together…
@big-smoke-rc2 күн бұрын
Mini has been updated. Now you can use the buttons under the screen for playback and triggering
@MyNameJeff..2 күн бұрын
Teenage Engineering has hands down the worst quality control. I had to return two op-1 fields, 3 op-z’s and 3 Ep-133’s. Such a joke.
@musikmaschine-ke2ph3 күн бұрын
TE doesn’t care about customers. My og op1 had some broken keys, First op1 field I ordered had a broken encoder, and it took 2 months to get a replacement that had a broken audio out! I’m thankful that the shop I got it from agreed to take the replacement back for good with full refound, because they understood that I didn’t like to wait another 2 months for another potentially faulty replacenent. So everyone considering buying this stuff: be aware that quality control and repair service is very very bad, and the higher the price, the worse it is in relation to the value.
@MyNameJeff..2 күн бұрын
Agreed
@DavidFranciscoMusic3 күн бұрын
the way I didn't know you were french
@SONWU3 күн бұрын
French? That's new to me 😅
@muthesiussoundidea3 күн бұрын
I've been checking the thing out intensively for 3 weeks now and really wanted to keep it. Ultimately, I'm happy to get rid of the thing again and treat myself to a few other instruments for the money. The DAW can't be beat for real production, the thing can't do enough for live performances, and I don't travel so often that I need a hipster toy for entertainment. But the hype is remarkable.
@SONWU3 күн бұрын
It really depends on your needs. For me it has everything I need to make a song…in one unit. That is such a benefit, as I like working on the couch, or sometimes outside. But I can see how it wouldn't work for everybody.
@muthesiussoundidea3 күн бұрын
@@SONWU I´ll keep my OP-1 Field for that. ;) Btw: Thanks for your fine lessons!
@MyNameJeff..2 күн бұрын
I really love my op-1 field, but it was a gift. I felt guilty even keeping it. All their products are like this, you realize it’s not worth the money. Plus their quality control is a joke.
@tylerlannan59353 күн бұрын
Bummer that you got a bunk unit right out of the gate. Glad they're sending you a (hopefully) functional unit soon! They really need to up their QC, and probably their warranty policy as well. For a device that costs as much as a used car they aren't inspiring a ton of in folks confidence with a video like this out.
@Leandermustdie3 күн бұрын
Please do a digitone 2 deepdive <33333
@SONWU3 күн бұрын
UPDATE: New unit is on the way…new videos when it's here!
@xuser83143 күн бұрын
How do I get a free OP-XY?
@SONWU3 күн бұрын
@@xuser8314 Make a few 100 videos/tutorials on teenage engineering devices 😅
@xuser83142 күн бұрын
@@SONWU Just send me the broken unit, Ill pay you 1000 bucks, tell them postal service lost it, easy
@bjamminsincebirth34944 күн бұрын
The arranger and song mode are solid imo. Simple but really useful in completing songs.
@bjamminsincebirth34944 күн бұрын
The compression and saturation sound great but the Fx imo could be better. They really should enhance the Fx though. The Components, Punch In Fx, and Brain, and Arps are really nice.
@SONWU3 күн бұрын
I thought the fx sound really solid…but these things are often very subjective. I know they would work for what I'm making, but I wouldn't mind MORE fx.
@iamsrge74104 күн бұрын
Great Video dude! 🤙🏽
@wackerburg4 күн бұрын
hi there \m_ Quick question; what make/model is that little waveform display in the back? Looks nice, yet blurry 😀
@willmcdono4 күн бұрын
oh... how long I have waited!
@peterbondmusic4 күн бұрын
Glad you got one! You're gonna love it!
@synthsamuraiproductions4 күн бұрын
Hunk of junk bro. U r great brother but the OPXY fools gold.
@SONWU4 күн бұрын
Yo the samurai in the house…caught me shillin' 😎 On a serious note though: It's a really cool device that perfectly fits my needs, but QA & warranty should be upped to match the price.
@iamghostgun4 күн бұрын
Fix your LED lighting vs camera frame rate.
@SONWU4 күн бұрын
if you put it to me this friendly, of course I will ;)
@iamghostgun4 күн бұрын
*Please* fix your lighting/frame rate so we don’t have seizures lol As a streamer, you should know some video basics. Cheap LED lighting generally requires you to keep your video frame rate below 120. LEDs are generally 60hz and you want to keep the frame rate at or below double that. LEDs that use pulse width modulation to control brightness are more susceptible to banding.
@SONWU4 күн бұрын
@@iamghostgun Thanks!
@NovakTheEnjoyer4 күн бұрын
😢 So glad you finally got one! Can’t wait until you get a working unit to really stretch your legs.
@SONWU4 күн бұрын
I can't wait either 😂😭
@christianstenvall60234 күн бұрын
Dude…. Spewin
@rokko_fable4 күн бұрын
man it looks awesome. love the aethestic. but.... of course, the price. If it was 1/2 the price, I might consider it.
@elementlab414 күн бұрын
I am beyond excited for your XY content! I hope you'll offer lessons on it someday. Would definitely take them with you!
@yvesb.51904 күн бұрын
Oh man.... it's quite shocking to see this on such an expensive device! 😵🤯 1) Didn't they say the keyboard is "military grade" and tested for I don't know how many presses. 2) Don't they do any quality control? (not even on units sent to KZbinrs?) 🤔😵💫 At least it's an honest move... you see what you get, you get what you see! 😄 Not saying that all units are faulty (and so far I have been lucky with my TE devices) but it's stilp worrying and certainly not what you'd expect for such a pricy device...... Let's hope that this is an isolated case. It looks like a fun device but quality issues could be a deal-breaker, especially at this price range. Other than that, l'd hope for: - An Overbridge-style integration with DAWs - A customizable "resolution" setting for the rotary encoders (--> how much turns oit takes to.get from dry to wet and vice versa). Sometimes it may be useful to go in small increments but more often (epecially during live performances) one may need a more drastic effect. It would be nice if one could choose between high and low res mode as default value plus being able to access the other mode while holding shift! 🤞🤞🤞 PS: Would anyone know if it's possible to set the metronome to "off", as a default value, when powering up the unit? 🤔 Thanks and best regards! 🙂
@robertjamesonmusic4 күн бұрын
I LOVE my OP-XY
@l3primatemtl4714 күн бұрын
Poor you 😩 not lucky…. I have to say (touching wood), that everything i’ve bought from TE was flawless with no bugs, including my XY… its a great device! You’ll have fun in a few weeks ;-)
@MyNameJeff..2 күн бұрын
Lol “touching wood”
@ilyamiskov4 күн бұрын
Also I would really advise you to either play with your camera settings to get rid of flickering (50/60hz setting) or get a special lamp/bulb for video creators that has no such issue.
@SONWU4 күн бұрын
Thanks, will look into it…normally I always film in daylight ;)
@ilyamiskov4 күн бұрын
You finally got one :) Excited to see in-depth tutorials for it.
@SONWU4 күн бұрын
🙏
@hiddenmaterial4 күн бұрын
sadge, hope they replace for u asap
@SONWU4 күн бұрын
Thanks…me too 😭 Such a nice piece of gear.
@hiddenmaterial4 күн бұрын
@@SONWU Excited to hear what you do with it, please increase my GASSSSS haha i want one for sure
@SONWU4 күн бұрын
@@hiddenmaterial I already know it'll be my main instrument for a while. I will do my best to induce some GAS for you! (Even though that sounds wrong)
@hiddenmaterial4 күн бұрын
@@SONWU 😂😂🥳
@asonnamego4 күн бұрын
For some reason when I hit sample it takes me to the "L R" screen. I cant seem to get it back into Mic mode. Any suggestions?
@khamiauerbach2847Күн бұрын
Same problem here, anybody found a solution??
@rantonerik4 күн бұрын
Woohoo! I thought you weren’t planning on getting one (at least, anytime soon)?
@SONWU4 күн бұрын
I said I wasn't buying one ;)
@rantonerik4 күн бұрын
@ 🤣
@OrangeDrinkMusic4 күн бұрын
congrats (skims the comments) oh no!
@SONWU4 күн бұрын
😂😭
@vagueversatile4 күн бұрын
Finally!!
@SONWU4 күн бұрын
YAY…and noooooo
@vagueversatile4 күн бұрын
@@SONWUsaw that 😢
@NetvoTV4 күн бұрын
Is this cow avaialble in OP-XY?
@SONWU4 күн бұрын
Nope.
@Farold_Haltermeyer4 күн бұрын
Hope you enjoy it, have really found it a breath of (expensive) fresh air. Odd QC fail though!
@SONWU4 күн бұрын
Thanks…I know I will love it, once I have a working unit.
@SethWeisfeld4 күн бұрын
FINALLY! Thought you were boycotting the XY for a minute 😅
@SONWU4 күн бұрын
No, just couldn't afford it ;)
@cbschrader4 күн бұрын
Mine gets delivered today and I’m hoping for no issues with it. Seriously, they better overnight you a replacement! A one day delay on this wouldn’t be as hard to accept. And even though you didn’t pay for it, having 20,000 people see their goodwill will go a long way.
@SONWU4 күн бұрын
Good luck with your unit…I'll see what TE says!
@cbschrader3 күн бұрын
@@SONWU Haven’t tested out all the connections, but all buttons and knobs are working as expected. 🙏 Happy to hear you are getting a replacement soon.
@bwest62754 күн бұрын
What a bummer! So close, yet so far away.....
@SONWU4 күн бұрын
Very well put.
@PerfectPurple694 күн бұрын
Ich bewundere deine Gelassenheit.
@samprock4 күн бұрын
Smells great! I received replacement for my XY which had one leg slight short. It’s 100% keeper, so I wanted it perfect. And it is! 😊 Mine can even play step n4 😂 Seriously mine works perfect and can’t let it off hands for a week. Solid. It’s next level OP-Z (I played from day one of release). (you can change sequencer resolution same as on OP-Z but I like pages better) Looking forward for your vid’s on it! Cheers
@drackaris_4 күн бұрын
Yours was one leg slight short as in when you press one of the corners it rocks a bit? Mine is like that, it feels a little bit annoying to ask for a return unit beacuse of it, but for a 2300 dollar product it should be totally stable. They were willing to replace just for that?
@SONWU4 күн бұрын
Thanks, glad your unit is perfect now! It's a really cool device and I can't wait to have a functional one…