Cheers

Whats the size of the oil sum screw ?

I take it the sump plug has the integral washer, i.e. you can't take the washer off and fit a new one? You refitted the existing plug/washer?

🐐

I am wondering what is for, that V tube connection on the engine cover. I am searching everywhere online but I cant find neither infos about that, neither where the tubes will connect. Same as with the EGR connection. EGR has an output connection, but I dont have nothing there. I keep my search about that. And seeing youtube videos, in order to get lucky and find a AZQ engine video, where it shows all that tubes and connections, so I can properly mount them 😅

Thanks for your useful video. Is it OK to turn the steering wheel with the engine off?

hit it

I don’t think the spark plug socket needs to have all them sides to it but I do think I’ll need a spark plug 14mm

Buenas donde puedo comprar esos espejos me gustaría invertir en eso ya que los hago a mano con Espejo de 3mm . Me interesa manejarlo original y provisional que es el que yo manejo soy de Culiacán y sinaloa y me aria un paro a decirme cómo puedo comprar al mayoreo

I'll be doing an oil change on one of these soon. I take it you replace the oil seals on the oil filter stem and cap? Also, I couldn't quite see where the oil level was on the dip stick when you brought it to the camera, was it to the top of the hatched area on the dip stick, or the TOP "crease"mark?, as there looks to be a lower and top crease mark. Cheers.

Can green antifreeze be poured instead of this pink antifreeze?

Perfect video for the FourFour changing lights and popping off what’s needed. Nice one mate!

What abarth is this ???? What did you do is it a chip map?

Great video… unfortunately it didn’t work for me because both my the levers are broken… ffs

Why take both bolts out just spin it down or up mate too fit pads

Do you know when the distribution of this engine starts to cause problems? I have one with 130000 km

Cada cuanto tiempo cambias las bujias Gracias por tu trabajo

you can suck oil from out of the dipstick hole, much easier, as under these cars there is a plastic protector , which is a pain to remove. . plus use a SOCKET type oil filter remover, much easier AND use a Torque Wrench to tighten sump plug + spark plugs. OR JUST GO TO A MECHANIC , much safer

where do you get the parts for it ? The cold air intake looks insane !

376 / 5.000 Hello friend, thank you for sharing your video, but doing a complete tune-up, you are missing several very important things. Change the fuel filter, remove the injectors and wash them with ultrasound, remove and clean the throttle body, scan and check if there are any fault codes, in the turbo, what you did is not a tune-up, but well, it starts with something.

Eso en el inglés qué tiene el volante a la derecha. Pero en el español con el volante a la izquierda?????

Thanks mate never done brake pads. Followed this worked like a charm for my 07 getz ❤

What year is your Golf 6? Exactly :)

Hiya, I have a 2013 1.4tsi, and the engine starts then dies after 5secs, engine sounds fine, any Idea what's up? (scanner doesn't connect) tested the fuel pump and that's ok...

Thanks. Useful

Thanks for the video going to do my sons vw polo this week

Award for the stupidest location of an oil filter goes to….

Please use a tripod for your camera. Your making me dizzy flying round constantly.

Bloody airport!

Darkest video in KZbin history! Get some better lighting.

Sounds sick bro, what did you have to do to get it sounding like this

Can you please give a link for the correct replacement part?

you make me feel like a 1zzzzzze ge

No, doesn´t crapy location for cabin air filter. You have ONLY wrong side pedals and steering wheel 😂

consulta, el filtro de combustible se cambia?

Excellent video. Changed my discs and pads but still squeaking 😫😫

Hi, Any light come up after installation on dash?

Great video thanks 🙏🏻

hi Jay, currently got yellow halogens, best alterative to get the white look please

I just tried to fo an oil and filter on the same car. The oil filter is so tightly on I can't budge it. I tried the 30mm socket and ratchet but the socket-shaped part just snapped off the oil filter. I've had to order a filter removal tool.....

Thanks for the helpful video. I wish manufacturers would put a small flap in the engine undertray to give oil filter access without having to remove the whole undertray.

My golf 1.4 16v burning oil what should i do their is no smoke when start ..

La vidange à30 000 kilomètres et tout les 2 ans ?

A few tips for a better end result. Warm up the engine first. Remove the oil filler cap. These steps aid the flow of old oil once the sump plug and filter are removed. Also, these EA211 engines are very sensitive to overfill. Refill with 3.5L to start, make sure the car is as flat & level as possible, run the engine for a minute, then check the oil level and add a little more at a time to reach max. Manufacturer states 3.8L total. If you overfill by even a small amount, you'll get overpressure in the turbo, and oil in the exhaust system, neither of which are good for the car.

Is the piston screw back or push back

Thank you so much, great video with so much detailed information

Hello friend, I have an error in cylinder N°3, vw polo 9n, I checked with obd2, but I would like to be sure if it is the coil... question: if I change the coil to another cylinder N°2, and the error appears on n2, does it mean I have to replace the coil? am I correct? hug🫡

Hey I can't do it 2:26 it's not moving. How to take it off?

U should have changed your water bottle too

Hi, nice video! I want to ask when changing the oil if there is an oil filter avalible?