Finally the answer to "What do Brits do when it's raining". We have 55" of rain/year where I live. You're giving me ideas.
@miniphase5 күн бұрын
Totally correct! The indoor season starts in earnest in a couple of month time.... it's a great format for trying out concepts quickly and simply.
@larryblanks676518 күн бұрын
That's not soring it has an electric motor. If you can't launch by hand and have your model stay in the air, it's too heavy!
@cristiansandor443521 күн бұрын
@miniphase, this is another amazing build of yours ... I know you are a fun of nurflugel or flying wing gliders - not sure how to call them but they are the once with a constant wing chord and wingspan more than 2m. I am now along a build of one of this type of 1.9m wingspan. But, I would like to ask you if I would look for a next project 2-2.5m wingspan and willing to design/build a similar to Horten or even a Horten wing, what would you recommend I should look for?
@miniphase21 күн бұрын
Great to hear from you! I've not built any Hortens (yet). But how about something like this?- kzbin.info/www/bejne/j4e3lJedbrGrhcU
@cristiansandor44353 күн бұрын
@@miniphase In the end I decided to build a similar CO8 (from aerodesign_de ) that is scaled down to 1.9m span ( max of my bench without joining wing parts ), 187mm chord a 25deg sweep back and MH60 airfoil. I also added a motor in front . I tried a maiden yesterday but it did not went well. I set CG at 10% of MAC but it behaves like it is really tail heavy. Also motor I installed tilted down 3 deg but I will have to tilt it more. Can you please help, tell what is you CG location on your wings? The motor is 10-12mm below chord line and at 90mm from wing leading edge , can you suggest what should be a correct tit angle? Thanks
@Schleppseilwinde28 күн бұрын
What a lovely Minimoa! Smooth Toplanding! Thank´s 4 sharing Bes regards
@miniphase27 күн бұрын
Glad you enjoyed it sir!
@Ziet14 ай бұрын
Thanks for the reply will getting one.😊
@Ziet14 ай бұрын
What models are they!😊
@miniphase4 ай бұрын
SAS Wildthing 46" Sir! Happy flying!!
@lizhikai55874 ай бұрын
I've also flew this thing. It's a thermal indicator due to the low wing load:) So relaxing that I can even put my attention away from the plane for a while and come back again.
@miniphase4 ай бұрын
It certainly looks like a docile model!
@pjweds5 ай бұрын
Very good Paul
@miniphase5 ай бұрын
Your glue gun saved the day Pete!
@barrycole83785 ай бұрын
Where is this being flown???
@miniphase5 ай бұрын
@barrycole8378 Hi Barry, Thurnham, near Maidstone, Kent.
@jamesturncliff59606 ай бұрын
You should design and sell some 3D prints of that😊
@brucepearson63227 ай бұрын
Took me a while to warm to flying foam. Now I have about 10. Including both Evo and trek Alula!
@miniphase7 ай бұрын
Foam definitely has its uses!
@DreamFlyEcuador8 ай бұрын
Wow so beautiful! Stunning! Would love to circle that soarer with my miniquad. What's the construction? Balsa?
@miniphase8 ай бұрын
I dream of seeing some footage like that, glad you enjoyed it! Construction is foam with fiibreglass and veneer, plus a little bit of carbon here and there.
@danielburke65368 ай бұрын
Majestic
@miniphase8 ай бұрын
Thank you Daniel, I'm very happy with it!
@highflying828 ай бұрын
Stunning .. glad to see it flying again 👍🏻👌
@miniphase8 ай бұрын
Cheers Jeff.... it's a newer, bigger, heavier one this time around!
@highflying828 ай бұрын
@@miniphase blimy .. the previous one was a monster .. happy landings mate
@highster10 ай бұрын
So a plank with ailerons and a V tail. I wonder if it could fly with just the V tail? It has enough dihedral to do a rudder only turn.
@miniphase10 ай бұрын
I wondered that too.... also it's got my itch increasing to do a big pterodactyl or similar!
@lizhikai55874 ай бұрын
It could, because the dihedral of the wintip is enough. There's a no-aileron version. And... If you wish, you can change the mounting angle of the motor so it gives a 2-channel model like feeling. Add throttle, it would climb without elevator control and vice versa. More relaxing.
@paulwright325211 ай бұрын
That is so real
@cristiansandor4435 Жыл бұрын
Hi, I know you make foam core wings. Can you please explain how you build the washout in the foam core and sheeting? You may have a build thread on RCU or RCGroups it would be much appreciated if you could share.
@miniphase Жыл бұрын
Hi Cristian, good to hear from you. I just cut the cores with one of the aerofoil templates set at the required angle. When I sheet the wing, I place vacuum bagged layup back in the core outers, to prevent any unwanted twist to creep in as the resin cures.
@mikesrcgarage Жыл бұрын
I have this glider and I was wondering if you could slope it. Would you say light wind only or do you think it could handle 15mph wind? Thanks, looked like it flew nicely!
@miniphase Жыл бұрын
Personally I'd stick to lighter conditions only... happy flying!
@teachermike4831 Жыл бұрын
Bk g music crappy and loud
@gisall8205 Жыл бұрын
GREAT video. Was that a Crow breaking set up used to slow the wing down for landing.
@miniphase Жыл бұрын
Thanks! The flaps are just about pitch neutral, IIRC they needed a touch of up elevon trim.... it's all in the correct sizing of the control surfaces..
@eduardorosademoraes4586 Жыл бұрын
Parabéns pelo seu Sinbad, ele ficou lindo. E o voo magnífico. Você poderia informar qual é a envergadura e o nome do fabricante deste Kit. Obrigado.
@ziggy20072008 Жыл бұрын
Art of Noise/Close to the edit…. Great track from a great album.
@mikesrcgarage Жыл бұрын
So how did you remedy this problem. Push the CG back and less throw on the elevator/elvons? Thanks!
@mikesrcgarage Жыл бұрын
Hi I know I'm a day late and a dollar short on this comment but it looks like you have some experience with flying wings. I just built a flying wing or plank for slope soaring, it is a wing with no dihedral and is full symmetrical with a very slight swept forward LE. It is repurposed wing from a 3DHS Slick 540 3D plane. I have shorts video of it on my channel. My question is how to tell if the CG is right before throwing it off a cliff into the wind? Lol! I have hand tossed it at a park to see if it flies and I would not call what it does as flying! Although I can control it and bring it down but it really has no glide ratio but this is with no wind. I watched a video of yours about hyperstalling and it seems how that wing flew is what I'm experiencing. It seems to bob up and down very easily. How did you remedy your wing/plank to stop that effect? Thank you!
@miniphase Жыл бұрын
Hi Mike, the best approach is to use one of the online cg calculators as a starting point and then make any adjustments in small increments. Also make sure you don't have too much elevator throw.... best of luck!
@mikesrcgarage Жыл бұрын
@@miniphase Thank you very much for your time and help. Have a great day!
@mikesrcgarage Жыл бұрын
Wow everyone laughed at his walk of shame, is this in the UK? Lol! Poor guy, poor Le Fish! ✌️😎👍
@collinmccallum Жыл бұрын
amazing!
@aminto9448 Жыл бұрын
A gorgeous plane!
@staho9796 Жыл бұрын
fantastic fun
@cristiansandor4435 Жыл бұрын
So bad for this wing it was looking nise. Anyway when I crash a plane, the second day I can see an oportunity - I can build another one may be even better. I have a question if you can help... can you please tell me which shop are you buying the mylar? Is it an online shop?
@miniphase Жыл бұрын
Hi Cristian.... yes, life always looks better after a day or two! I bought my last batch of mylar online I think, but it was quite a few years ago and I still have plenty left. Best try searching ebay for stencil mylar. Cheers!
@cristiansandor4435 Жыл бұрын
Thanks for your quick support. I expect the thick is 0.3mm? I know you build and fly wings for very long time. I remember I asked you some questions back in 2009. I suggest you make some tutorial on how you are making the foam core wings. It would be much appreciated. I'm sure you have an excelent technique and experience.
@s9523pink Жыл бұрын
Beautiful ❤
@miniphase Жыл бұрын
Thank you!
@aidanmacdonald3430 Жыл бұрын
where is this site?
@miniphase Жыл бұрын
Hi Aidan.... there's a clue is in the title!
@richardo212 Жыл бұрын
Just found this video. Brought back happy memories of a wonderful day soaring on this slope in October (2022). Nice video
@miniphase Жыл бұрын
Come and join us up at Thurnham when you get a chance!
@richardo212 Жыл бұрын
@@miniphase Thanks for the offer. I'll take you up on that next time we're in Kent.
@tp2fly Жыл бұрын
Oops!
@miniphase Жыл бұрын
Indeed Trev.... wasn't the first time and certainly won't be the last!
@TilmanBaumann Жыл бұрын
Well at least you had no chance of saving that one. Feels better to blame it on external factors :D
@miniphase Жыл бұрын
Need some room in the hangar anyway!!
@garyscroggs6868 Жыл бұрын
Oh dear!
@Herr_Jehmineh Жыл бұрын
Oh noooooo. This one’s soo great!
@towitowi1 Жыл бұрын
Jak to się mogło wydarzyć???
@aidanmacdonald3430 Жыл бұрын
where about is this site?
@miniphase Жыл бұрын
Hi Aidan.... North Downs in the UK.
@reverendkrv Жыл бұрын
Ouch!
@miniphase Жыл бұрын
They all go the same way eventually!
@reverendkrv Жыл бұрын
@@miniphase Indeed,the planet wins ;)
@miniphase Жыл бұрын
@@reverendkrv Lol!
@alistairclark6814 Жыл бұрын
Heart breaking!
@miniphase Жыл бұрын
Don't feel bad Alistair.... it's all part of the game!
@ericbenjaminjr Жыл бұрын
What an amazing machine
@miniphase Жыл бұрын
Thank you Eric, still love flying it, though it hasn't had an outing this year.
@MrRobbowich Жыл бұрын
Nice video. What airframe is this?
@miniphase Жыл бұрын
Thanks Robert, it's an own design. 3 metre span, 25 deg sweep and an MH45 wing section with 4 deg washout.
@MrRobbowich Жыл бұрын
@@miniphase Thank you. Just the answer I was hoping for. Looks fantastic. Do you use any dihedreal? What is your opinion on wing taper?
@miniphase Жыл бұрын
@@MrRobbowich Many thanks! This wing had a couple of degrees negative dihedral, but I don't think that's critical for success. At full size scale, taper does have benefits, but for a model I don't think there's any advantage. By reducing the chord at the tip, you just have to introduce more twist to get the same stability. There's a full build thread here- www.rcgroups.com/forums/showthread.php?1480107-3-2m-thermal-wing though I would suggest using the HS522 wing section rather than the MH45.
@turboromy Жыл бұрын
Awesome, flaps work like a brake. Just curious if you have tested or does it even make sense to use all surfaces down as flaps. I doubt it would work at all.
@miniphase Жыл бұрын
If the flaps were sized differently, yes you could have this arrangement, though I think pitch neutral flaps (as shown here) makes the transition between 'flaps on' and 'flaps off' more convenient.
@alistairclark6814 Жыл бұрын
Ripping and shredding, shredding and ripping! Gotta love a good windy day!
@miniphase Жыл бұрын
good wind on a good hill.... all good therapy!
@reverendkrv Жыл бұрын
Looks like a lairy one :D
@miniphase Жыл бұрын
Too lairy for me!.... btw give my regards to Dave!
@TitofBee Жыл бұрын
nice toy bro
@miniphase Жыл бұрын
It's a bit tasty isn't it!!
@f19ash Жыл бұрын
Very nice. Looking forward to seeing it being landed in the snow… 🥶
@miniphase Жыл бұрын
Not much to see.... perfect camouflage!!😆
@highflying82 Жыл бұрын
I spy Lloyd lol .. asw looks slippery well flown. That noise of a tight wire singing in the wind mouldie sounds great
@miniphase Жыл бұрын
He's everywhere Jeff!!
@reverendkrv Жыл бұрын
Very Sedate,nice looking model. Hope you're well Paul :)
@miniphase Жыл бұрын
@reverendkrv Hello your holiness! keeping well here thanks.... not much flying done in the past year unfortunately but hoping to rectify that in 2023. How are you and Dave keeping?
@reverendkrv Жыл бұрын
@@miniphase We're well thanks,not been on top of a hill for a long time though,maybe next year,dusty models -.- Dave bought a VW transporter and converted it to a camper,it's pretty cool.