Пікірлер
@j.s16 6 сағат бұрын
You saved me so much time Bro thx
@markettradinggenius Күн бұрын
I think the quick shifter/autoblipper on the Hayabusa 3rd Gen bikes are just as smooth, if not smoother, than the BMW...
@bjfikky 3 күн бұрын
I live in the area. What road is this please?
@jangummi9164 4 күн бұрын
Hallo Is there some Play at the mirrors or lever guard when every screw is tightenend?do you still satisfied?
@chrisdadigger1018 5 күн бұрын
you have the only bike that I think is nicer looking CB 1000R black edition. 👍👍
@chrisdadigger1018 5 күн бұрын
From my experience, it takes about 12 to 14,000 miles to really break a bike in. Usually within that timeframe, the bike gets a tick louder and a tick faster.
@KadijahHassan-m2y 5 күн бұрын
Out of all your bikes you can only keep one which one you keeping?......
@charlycharly3727 6 күн бұрын
Salut j’ai pas du tout la même prise sur la mienne pourtant identique à la tienne 2022 noir
@gruhnchris 6 күн бұрын
What mode are you using in these comparisons? Sport or race?
@lilbaker4115 6 күн бұрын
Is this legal in germany?
@IvanTopuzov-y8j 6 күн бұрын
Hello, Can you share what brand it is titanium header.
@d.magnus425 6 күн бұрын
I got it from Aliexpress. If you type in BMW S1000R titanium header on the search tab of the site a ton of them pop up.
@garretts5554 18 күн бұрын
Is this a full system or slip on? If you had to do it again, would you still go the same route? Sounds and looks incredible.
@d.magnus425 6 күн бұрын
It's a slip-on. I would probably go with the under tail exhaust if I had to do it all over again but I wasn't willing to pay $9k+ for the under tail exhaust at the time lol. Thanks for your comment!!!
@gruhnchris 22 күн бұрын
Did it throw a check engine light starting it up without being tuned?
@d.magnus425 6 күн бұрын
No it actually did not through a engine code but I did not have it started that long without the tune.
@maybeerainmaybeesnow Ай бұрын
I'm sorry to hear that you've had two leaks already on such an expensive bike. : What is the warranty on the 698?
@harmantarquini Ай бұрын
The exhaust tip is the ceramic black one?
@BedeRoger900 Ай бұрын
man those big single mounting point crash protection sliders, ive seen them snap frames too many times. id just rock the case covers
@d.magnus425 Ай бұрын
Yeah they are kind of large but I have some similar ones on my Streetfighter that I actually like and I have not had any issues.
@hypermotardking Ай бұрын
Keep these coming - find them extremely useful.. dropped you a mention on my latest gas cap install vid 👍🏻
@d.magnus425 Ай бұрын
Thanks for watching, I will check it out!
@maddan_78 Ай бұрын
you'll have to mod the airbox lid also, get even more flow ;-)
@fernandoorozco3764 Ай бұрын
Howd you get that display on tft?
@d.magnus425 Ай бұрын
I changed the TFT to race mode.
@gruhnchris Ай бұрын
Did you refill oil before starting it?
@d.magnus425 Ай бұрын
Yeah I did a complete oil change, just not in the video.
@elgrunto1428 Ай бұрын
I super appreciate the video and you taking the time to figure out and show how the gas cap is installed. It made the install really easy. It took me about 5 minutes to do after watching how it was done.
@d.magnus425 Ай бұрын
I appreciate your comment! Thank you for watching.
@highvaluetarget8162 2 ай бұрын
$500 for an oil change, chain lube, and 15 min of misc checks. I'm at ~300 miles on my '24 V4S. Plan on doing services myself.
@d.magnus425 Ай бұрын
I do not blame you!
@Weyaye 2 ай бұрын
Hi mate, did you order this as the S1000r or S1000rr
@d.magnus425 2 ай бұрын
My order says, BMW S1000r, 2021- 2024, S1000rr, 2019-2024.
@theperipateticgumshoe9047 2 ай бұрын
Oh wait, you installed the header? Was that a pain in the ass?
@d.magnus425 2 ай бұрын
No it was fairly simple. You just need to move the horn, radiator, and oil cooler forward to get to the header bolts. Once you do that, there's enough room to remove the stock header and install the new header. The removal and install took about 45 minutes.
@theperipateticgumshoe9047 2 ай бұрын
@@d.magnus425I’d like to try but that’s probably above my pay grade. I’m a need steps 1 through complete kind of guy. Sounds great.
@stevebuscemi4669 2 ай бұрын
When you clipped the black base into the red cap you miss aligned it by a quarter turn, thats why it sits between open and closed when open, and after closed when shut.
@d.magnus425 2 ай бұрын
Thanks! I will fix it.
@TheDiamoniteG 2 ай бұрын
So can I just use the keyless core without the cap? I imagine thats why it's sold separate?
@d.magnus425 2 ай бұрын
Yes, you can use the stock key core and that is why it is sold separately. I wanted the black keyless core and not to need the key to get gas.
@1TotalNoob 2 ай бұрын
So now you have to hold that cap while filling up?
@TheDiamoniteG 2 ай бұрын
the stock cap doesn't flip open either, so, nothing changed other than not needing the key.
@d.magnus425 2 ай бұрын
Nope, it is attached to the cap just like stock. The change is that I do not need to key to get gas.
@hypermotardking 2 ай бұрын
flippin ell.. way more complicated than it needed to be - thanks for guide.. still waiting an sw-motech tank ring system
@sly_sync 2 ай бұрын
You can also use an Ogio stealth 2.0 tailbag and wrap the straps under your seat. Mines has all 4 of the loops connected to the 2 plastics under on each side that are held by the two little black screws.
@d.magnus425 2 ай бұрын
No problem! Yeah installing this cap was more involved than the TWM gas cap on my SFV4.
@CanuluvaG 2 ай бұрын
Hey Mate, how did you manage to fit them 22mm motogadget barend mirrors on the weighted coupler?
@d.magnus425 2 ай бұрын
Hopefully I can explain this properly but I put the end piece on the end of the motogadget mirror and then bar end weight. Then I screwed everything in.
@inson1219 2 ай бұрын
Super useful information thanks for sharing
@inson1219 2 ай бұрын
I would spend money on the carbon belly pan
@d.magnus425 2 ай бұрын
Yeah I think I am going to get the carbon belly pan.
@amark4775 2 ай бұрын
Can you actually see what’s behind with the wing mirrors without moving your arms ?
@d.magnus425 2 ай бұрын
Yeah somewhat but in order to get a better view you have to move you your arms.
@JeevanKumar-s6t 3 ай бұрын
Sounds more like Duke 390
@theperipateticgumshoe9047 3 ай бұрын
How are the 1st gear power wheelies? 2nd too?
@d.magnus425 2 ай бұрын
1st gear power wheelies are insane it even does it with the rider aids on. I am working on my second gear wheelies on this bike but so far so good!
@spencerides1951 3 ай бұрын
I have the same bike/exhaust, I found the noise unbearable with the DB killers removed and ended up putting them back in. Have you tried the mtorque map? Is it worth it? I’m running the performance map right now.
@d.magnus425 2 ай бұрын
Yes it is very loud without the DB killers and or without earplugs. Yes I tried the mtorque tune and there's a small difference in gears 3-5 but I noticed that it burned more gas than the base tune. I had to fill a lot more with the mtorque.
@popeye7833 3 ай бұрын
Some cchange front wheel with one teeth less to increase torque
@giovannipicardi7984 3 ай бұрын
Vorrei montarlo anche io però sono ancora in garanzia una bella mappa fatta bene e via ho lo scarico come il tuo lv10 acciaio e carbonio e filtro sprint filter p08 già solo con il filtro la .oto rimappa da sola e si nota una piccola differenza sarà un lavoro che farò in inverno grande moto attualmente la migliore hypernaked del momento
@d.magnus425 3 ай бұрын
Agreed!
@sgassone 3 ай бұрын
but the valve cables out or not?
@MAADMAAC 3 ай бұрын
151kg too much aprillia sxv is better driving 4 sure
@alfeezmohamed8115 3 ай бұрын
Where’d you get those mirrors from? I can’t justify paying 400 for the rizoma ones
@d.magnus425 3 ай бұрын
I actually got the mirrors from Amazon. I typed in S1000r mirrors in the search bar and they popped up. If you have the M1000r you will need the kit that Rizoma makes in order to put the mirrors on the bike.
@george4557 3 ай бұрын
Looks great man. How much did it reduce the vibrations coming through the bars? If at all? I have an S1000r and my hands go completely numb after about 15-20 minutes of riding.
@d.magnus425 2 ай бұрын
@@george4557 It significantly reduced the vibrations!
@nickcrow6675 3 ай бұрын
Does that have the db killers
@juancamiloenriquezrr3037 3 ай бұрын
Hi, how long did it take to deliver it to you?
@d.magnus425 3 ай бұрын
It took about three months for me to receive it. Which was the only negative thing about the exhaust.
@juancamiloenriquezrr3037 3 ай бұрын
@@d.magnus425 omg. its long time, thanks men
@Single698 3 ай бұрын
I just got quoted £600 to fit the termi’s 5 hours to fit he tells me, did you fit this yourself and what about the remap.
@d.magnus425 3 ай бұрын
That's actually not bad for installation. Yes, I put it on myself. It was very easy especially compared to my other bikes. There is no need for an upmap /tune because they are slip on cans. That was one of the selling points of the exhaust for me, which is no tune needed!
@Single698 3 ай бұрын
@@d.magnus425 yes end cans look and sound great, sorry i mentioned it as i was talking about full system, end cans easy fit but apparently most of the front end has to come off for the full exhaust so i think you done the right thing if you just wanted it to sound and look better which you now have.
@MotardPilot 3 ай бұрын
Have you experienced any odd shifts with the quick shifter? I bought the shift tech system but had some weird shifts where bike would fall on its face. Ended up back on the stock system for now😢
@d.magnus425 3 ай бұрын
My quick shifter only act weird whenever I downshift to 1st gear. It does not do it all the time but when it does it catches me off guard.
@MaMeMoto 3 ай бұрын
Do you know if the AR is shorter than the stock exhaust? Or how much space there is between the end caps? My indicators are very close to the stock exhaust end caps and it shouldn't be any tighter in that area 😅
@d.magnus425 3 ай бұрын
They are about the same in length but the AR can are more narrow than the stack cans.
@bet 3 ай бұрын
There is a frame slider for this bike shift-tech has them
@d.magnus425 3 ай бұрын
Thanks for letting me know. I am going to check them out!
@mememetal666 3 ай бұрын
Nice look
@hypermotardking 3 ай бұрын
sounds good… think im going to get the same one 👍🏻👍🏻
@d.magnus425 3 ай бұрын
Good choice!
@Earlymorningslowrider 3 ай бұрын
Hey there so I just want to make sure before i purchase the mirror won’t loop on the existing bar end adapter correct ?
@d.magnus425 3 ай бұрын
Yes I have the stock bar end weight/adapter on with these mirrors.
@ludovicbourg9361 3 ай бұрын
Thanks for the video. Looking for replacing my eom mirrors on my new m1000r Did you fix the right mirror which looks vibrating much more the left one? In addition what is your final statement after a couple of months Many thx
@d.magnus425 3 ай бұрын
No I ended up just taking the right mirror off all together because it was still shaking and I could not see behind me on the right side. Overall, I like the mirrors but I changed my set up by installing bar end weights and stealth mirrors. I am pleasantly surprised that the mirrors do not shake.
@ludovicbourg9361 3 ай бұрын
I guess bar end weigth are the evotech ones ? Whst about stealth mirrors which model and from where (reseller) thx again
@d.magnus425 3 ай бұрын
@@ludovicbourg9361 Yes, the bar end weights are Evotech Performance. I actually got the mirrors from Amazon. I typed in BMW S1000R mirrors and they popped up. The were $120 when I bought them but I think they went since I bought them. If you have the M1000r you will need bar mirror kit that Rizoma makes.