As a teen metalhead I remember wanting one of these so badly!!! Ended up with an ehx hot tubes (the ones that actually had tubes) And was happy enough. This things a tank!

Wow! I have a Deluxe Electric Mistress, at some point it started to get a clock noise, so I opened it and foud 3 trimpots and started to adjust them by ear until that noise disappeared and works perfectly. I thought "well, I can't broke it more, let's try this by ear" and it worked. Just intuition.

This helped!

Awesome, thanks for this from Illinois.

The brown colour and mix knob point to the PorkBarrel being more a MonteAllums mod CE-2B clone than a CE-2 clone. Mine is one of my fave things.

3102 is a BBD clock driver, 3207 is a 1024 stage BBD. Theyre cheap clones of the delay (not modulation) chips in the Dimension-C among others.

I have this amp, bought 2 of them. They great amps, you can get great tone from them. Recording them is near impossible though, I've found best results with those dual Behringer condersor mics at low volume... Great to see they still in service, great to play with but times have changed it all electronic now....

Great explanation! I have a degree in electronics from 30 years ago😂 so I just started building pedals and wasn't sure why they used a stereo input until I saw a fuzzface with only battery for power then i finally figured it was used as a switch to complete the circuit 👍

Help me please i hear just beeping sound no guitar

This video is as fantastic as in/out Z of the last circuit! Very good teacher! Thanks you so much!

what is your thoughts about replacing the r13 and r15 with potentiometer and connecting it to pin 1 and 3 and the pin 2 goes into the TL072, I am thinking if you could make another control for dry/wet level

Yeah yeah we get it.

??? All three samples say Chip #1. Not, chip1, chip2 and chip3.

Every data sheet I look at shows a huge increase in hFE when the current is increased. I have an atlas 55 tester that only tests at 2.5ma, most pedal builds cite an ideal hFE at 5.0ma and I never trust my measurements because of the difference in current. This is the first time I have heard/seen that there isn’t a large increase in hFE from 2.5ma-5.0ma. Should I assume I am closer than I think when measuring at 2.5ma? How would you handle this? Sell my DCA55 and buy a DCA75?lol

Thanks!

Hi. What potentiometer do I need for the additional GAIN controller?

If I'm ever looking for a video on a new area or aspect of the universe that is pedal build and design, I'll always watch yours before going any further. I find them perfect for grasping a basic understanding of new concepts. It sits in what I call the "Goldilocks" zone of information; Not too heavy, not too lite, just right. Works well with my, "OK, hurt me, but just a little" attitude towards life 😛 Being a fellow Australian help, too...

Very helpful my friend! I’ve learned so much just by checking out your videos and reading the comments. Please keep the tutorials coming. I’ve just ordered my first breadboard from coppersound so I’ll be experimenting with circuits any day now. Thanks again 🙏🏼

Great explanation I didn't think about the parallel version feeding back to the power supply that's great to know. Great videos 🎸🤘

is the a momentary one of thease that still has the click ?

I imagine there'd be no difference sonically between a single 100k and two 200k resistors in parallel, so would I be correct in assuming that this mod applies just circuits that already have resistors in place as opposed to something your building?

That prismatic tone 🤤

Helpful and well explained 🙌

AC V-1s -vv as such give you plenty Hfe of 5. Basically a funked tr. (Sell them for a gig). They might as well be fthemselves transistors, el coral. I like dumbshits in glass at Hfe 20's but who knows shit. Gotta buy more pots 🤞😐

SOS or save 60% of our transistors Bassists deserve to funk too righteously? I thought it was a filter capacitor. Dummy 😜 I thiifht wrong. There is a whole bias cinfiguration in the first stage. Then bias the last 🤭🤫 Who made these ama zzz ibg mounds of shit?

I like the bad set to my ears

i am guessing a Tonebender does not suffer as much either.. I really like the fuzz face but its a pain with this as even the WAH has a buffer and stuffs it, put the WAH after and it sounds terrible

I like it! and I subscribe! Greetings!

Fantastic. Mate, can you tell if I can wire multiple inputs and outputs to a single of those buffers? I'm trying to sort a patchbay to my pedalboard.. thanks in advance!

This is going to take me more that seven minutes.

Well since I've been doing this pretty much since pedals first came on the market. Here's one thing that I've noticed if you buy cheap ass pedals like the ones on Amazon no name garbage .... That also means you're more than most likely buying generic cables as well. If you stick to the mid-grade stuff you'll be fine. The high grade stuff you'll be even better. Cheap ass pedals cheap ass chords with a cheap ass power supply. Guess what you're going to sound like a cheap ass 6th grader .🤨 And that's fine if that's what works for you. But don't be posting any videos anywhere and acting like you are the shit. Because 99% of the videos that most people post of them playing guitar and whatnot. Sounds like garbage. Just being honest if you can't handle it... you know what you can do.

As much hype as the 308 gets, this demo showcased that the OP07 is the better opamp.

Hi thanks for this quick tip - I am totally new to this, but it's no clear to me whether static protection really matters. So you won't damage the chip if you hold it just like that, without connecting your wrist to the ground?

gold !

Hallo, Image this Circle but it don't run 😭 just Bypass clean sound. what kann be the Mistake?

You are the man! Thanks so much for this.

I built this recently and it's one of the best choruses I've ever played, but I cannot get rid of the clock noise. I wired it a couple different times with the wires as far away from the BBD as possible, but still quite noisy on certain settings.

Has anyone bought this that lives in the united states? I'm a little worried about shipping from Europe. Is there any where to buy it from in the states, or is the shipping reliable?

Thx

Would you have to do anything different with hard/soft clipping diodes for distortion when doing this biasing? And do you have to unbias it at the output?

I can't find a pdf of the schematic? I can use the video to work it out if you didn't provide one.

Excellent and clever project for the guitar pedal builder - many thanks!

Love how this showed the breadboard. If I don’t see a picture of it I have trouble still…

Really interesting and useful. May the fuzz be with you!

What phaser circuit - mxr phase 90?

This looks like a great sit for guitar pedal builders. Just subscribed.

This was very helpful thank you

4kHz peak is where the MM Stingray Bass has its famous tone.

Great Great Great 👍👍👍👍👍

I had trouble getting the little tabs to hold once I had pried on them. Ended up having to shim the bottom of the switch so it wouldn't just pop out every time I pressed it.