@@richmolnae1453 I typically don't do step by steps but rather highlight the major points. Appreciate the feedback, what info would you say is important, always looking to better my content.

@@richmolnae1453 wth, lol

@@joepereira8317 I think as long as your compressor isn't direct to the switch you'll be fine. That's going to be pulling the amps and would stress the switch.

Hey Montana, no sir no issues there. Plenty of clearance.

@@jasonpena5065 thank you, blue has come along way

I've never put any distance on it. Based on the physics, it should be no different than riding wear unless the bike isn't properly secured. But then I'd guess you'd have bigger issues then.

@@funkybioped haven't had any issues, hoping to color match them soon.

Thanks John, much appreciated.

@@yungfresh2def24 glad I could help

Did you have any issues getting the 2 harnesses to connect to each other? I’m having a tough time getting the molex connector to fully click in place. The pins aren’t bent either.

@yungfresh2def24 the plug that plugs into the actual light didn't click for me either if I recall. Is that the same plug you're having issues with?

@@Mikeityourself I haven’t tried the one that connects to the bike’s harness yet.

@@mrantone916 hi, tires were stock sized, 130/90-16 as for the forward controls no idea. They were on the bike when I bought it and weren't branded. Sold the bike a few years back but was a fun ride. Thanks for watching

@ man that build is amazing thank you .

Hi Don, i bought my paint from my local RC hobby store but you can get it on Amazon - www.amazon.com/s?k=tamiya+translucent+paint&crid=3RUPY7FA8EQUX&sprefix=tamiya+transparent+paint%2Caps%2C249&ref=nb_sb_ss_saint-refocus-candidate_2_24 As for the wax, first I used Meguiars Plastx - www.amazon.com/Meguiars-G12310EU-Plast-Polish-Plastics/dp/B00F653HGS/ref=sr_1_2?crid=30UMDT7QK09SI&dib=eyJ2IjoiMSJ9.cCJumdfnPPfn8kw0_mWxXN7mUuFFGQjqs54CNQ_XhC-O5ttunEut99ua94vBIIsXldfrCrp_IecH6fPoZtrEoFFZl_8AVjKTWm-_KgfSCSjB7CULIGnHT1tEq_-_nvD7svtmMD_leVm7gLLRRxe4Pvrk3N0EqzSSSr9lchiNwiIh-zTWxyQe7OSb0VWWjxX3qF5CU3sQ5CMgjNWgBPw3GcpzXe0NnccclzlnDwSRuk4vzPWPeMCw8Sby4EIbsmBixieP4TkbSndnRbAzn_2knpmSX9qbm3n5kpBP2m0Zrw4.HzoqZ5fCBIIG-t3ApbHxXYM_cSCHc0iS4rn8jVHd_II&dib_tag=se&keywords=meguiars+plastx&qid=1731300796&sprefix=meguiars+pla%2Caps%2C249&sr=8-2 And then did a quick coat of Turtle Wax - www.amazon.com/Turtle-Wax-T-223-Super-Shell/dp/B000BPSVJ6/ref=sr_1_19_sspa?crid=3OJTQDNJ0DGIS&dib=eyJ2IjoiMSJ9.7MnJXLQoY4_kSvJnnMrTkVKnJThC9bQDw9wqAJ3UxY1YN86qyBo_2RXMZx66kmqjSE_c-CRVvzM-vewKf8FKitpkQNkLAj-Dppzo4yAvfUDDhlEPYuWDrG4RnOaRQglor-843685qRZRKduCatajMnDzmxX4ecHdLKUk9UvWaI9fvHhXaD0xZZ_oLr4LhtBL4zA9FDzGjKMj4pbmAZKfYG-fBBKu9FOMW4lHbqNNbfiIiQP4YWD_cK_LxXq_1hZ2-D5_TcXMjFJTv8ikMv8QkyddrWXk5jCVpYLnv3rpgGs.6Rg905kQaLVBesezxC3MPVJUeuB14sRtT1KnsQWUIyg&dib_tag=se&keywords=turtle+wax+paste&qid=1731300899&sprefix=turtle+wax+past%2Caps%2C217&sr=8-19-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&psc=1&smid=A1UWLDVGZSXGKG I recommend checking your local Walmart, sometimes their prices are better than Amazon (if you dont have to drive to far).

@@linhnha1339 thank you

@@uniqueflh2941 good feedback

@@RobertEddy-l7m best bet would be to try a locksmith, some specialize in auto and motorcycle. Or maybe the company that sold them, I think there is a serial number on the latch. Wish you luck.

Thanks for your help mike

thank you and thanks for watching

Thanks Mike, appreciate the feedback.

Thanks Tex, I'll definitely check that out. I've also wanted to try out that 4k clear to reapply protection but it's like 40 bucks a pop.

Glad I could help, I ran into the same challenge.

@@et9010thank you and thanks for watching

I actually tried out some blue vinyl tint but trying to get it to lay flat with all the curves just wasnt working. I couldnt get it to a spot where I could even make a fail video, lol. Thanks for watching Rick.

@@Mikeityourself Thanks for the info, I was planning to use film on my windshield.

I didnt know that, makes sense though, most folks are looking down at their fender. Thanks for watching.

Thanks Carl, I definitely had my doubts about pulling it off.

@@Mikeityourself I quite fancy one for my 71 shovel electraglide for when the mood fancies... lol

@carljames4161 sometimes it's just nice to have right :)

Thanks Robert, appreciate the feedback.

@@CHOPRJOHN hey Chop, nah it's still on the list but I'm still saving up. I also knew I was going to do the lid kit so figured I'd knock it out before getting them done.

@@DiscipleRedline I haven't had that happen. Sounds like the lid pulls away from the lock or something. Is that the case?

@ ​​⁠the latch is still locked but the latching mechanism that goes over the pak itself has play in it. They sent me a new latch all together, hoping that fixes it. Other than that I love the pak.

@@nickmich 100% , thanks for watching Nick

Will definitely be following up on these stab's. Hope they resolve my issue. As for the Cable, root cause is im a dummy. lol. I was comparing the lids from the factory to my TCMT bags and liked how the speakers fit better on the factory lids. So swapped them over but wanted to keep the locks and I had to drill out the rivet that was in-place. Well during that whole process, I kept flexing that termination and it finally just broke. Its pretty soft, guessing its lead. Im probably going to replace the same parts on my King because i stressed them pretty good as well. Dont want them to break on me while locked.

Thank you and thanks for watching

ya wonderful

Not these, I couldn't find TCMT branded ones that looked like a solid light, they were the individual led bulb style which didn't match my other stuff, I like the florescent look. HDBUBALUS Motorcycle Tour Pack Accent Side Marker Light For Harley Electra Street Road Glide Trike 2006-2022 (Color: Smoke) a.co/d/53IEP6A

Would like to hear your suggestions

It's been a great backrest, thinking I may upgrade to the one that you squeeze on the sides to install and lock in place. Seems easier if you keep switching it on and off.

@@Mikeityourself Sure thing, we made this kind of design on our upgraded passenger backrest!😉

@@DavidFryfogle thanks for the feedback

Not sure if it's the same, when you buy the wheel through the eBay guys I go through, you supply them year make and model.

If you have the stock speedo and provided the seller with your bikes details the wheel should work. Would call DNA and tell them what's wrong, maybe some kind of adapter or wrong part got sent.

I can try and draw something up, shoot me an email at mikeityourself @gmail.com

Only argument I've heard on the tranny that made sense was if they don't have an oil pump running then it isn't lubing the gears.

I've used in several times in a few years. BTW, I've never read a comment where someone ruined their trans. Only comments are, it turned out okay. You guys might be worrying too much - there's no load on the gears while being towed. Try to find someone who had to replace their trans.

I use a combo of sandpaper, brillo pads and then polish to buff them. Got a video on the process on my road Glide. Hope it helps.

Whats up Lee! Here is the link to the CV website for this set. cerwinvega.com/products/rpm-harley-davidson-r-lid-kit-with-st69cx2 I used the bags i had on and did the cutting. Ill drop the link to that video here. kzbin.info/www/bejne/Y6mXcq1sg7FrmpY Hope this helps and thanks for watching.