2 жыл бұрын
6 жыл бұрын
7 жыл бұрын
Пікірлер
@marydooley4734 Күн бұрын
Loved the wistful, "This receiver served me well" with a little pat.
@jasonlee3498 2 күн бұрын
Hi can I know which bearing I should get?
@toaletttbord 3 күн бұрын
Please pull your speakers a few inches forward, you dont want them to be all the way back to breathe. I would recommend keeping music in stereo and not Surround. And 80w is not really that much Power
@edgarkerr234 3 күн бұрын
Please don’t use brake cleaner in your potable water supply. It’s poisonous. Use spray water instead.
@blakestreetbomber2715 6 күн бұрын
What happens if I use the water inside the house while this is flushing
@harrylo2316 8 күн бұрын
Thank you for sharing your knowledge and going to the effort of filming this.
@jonathanjovenal 6 күн бұрын
Thank you for watching! Glad you like the video.
@ar-15techtipsinunder5minut8 9 күн бұрын
Great video, Great build, I watched all 44:51 seconds of it. I would only comment on the need for a old towel on your work bench to keep all the metal banging down and scarfing of metal to metal parts. Just me. Love Colts, the OEM2s are great base to finish a build! Amazing rifle really.
@jonathanjovenal 9 күн бұрын
Thank you for taking the time to watch and glad you enjoyed the video! I appreciate the tip, I will definitely keep it in mind next time around!
@GATEWALKALONE 13 күн бұрын
where is the best place to find workshop about manual tranmission?
@chad5188 14 күн бұрын
The 4k ips just look washed out due to being matte rather than glosy display.
@shockworld1848 14 күн бұрын
What's the pvc line to the left of the hot water line? I noticed on the side of my property, there's a fair amount of water that drains from there.
@WR3ND 17 күн бұрын
Thanks man. I got this for my Pi 5. Looking forward to it. Cheers.
@jerrylim8195 18 күн бұрын
What size of water did you use? 1/2 or 3/4 horse power?
@jonathanjovenal 11 күн бұрын
@@jerrylim8195 Hey, I used a 1/6 HP pump per manufacturer recommendation.
@michiganrazorriders9749 23 күн бұрын
Great videos - do you happen to have a link to clearance/inspection specs? Id like to see what's good before buying new parts. Just starting this video so if you already have it in somewhere, thanks.
@eddiehernandez7427 24 күн бұрын
Awesome. I appreciate the video. Any chance you could show us a 3rg gen Tacoma-2019 more specifically
@amandalabate2049 27 күн бұрын
Mine looks different it has no Synchros
@bobjackson7629 28 күн бұрын
Brilliant demonstration. Absolutely clear. Would apply to all the bolt in fuses. 👍 Thankyou.
@iAmTaiBoogie Ай бұрын
bro this video was so in detailed! Thank hyou!
@jonathanjovenal Ай бұрын
@@iAmTaiBoogie Glad you like it! Thank you for watching bro. Your username looked familiar, I actually came across your videos before bro!
@hotwater8473 Ай бұрын
10 months later how are you liking the denon? Upgrade bug hit?
@jonathanjovenal Ай бұрын
@@hotwater8473 I am loving it! I ended up adding 4 Klipsch ceiling mount speakers in January to enable Dolby Atmos and the receiver does a phenomenal job. 100% recommend this receiver.
@hotwater8473 Ай бұрын
@@jonathanjovenal niiiice! That’s what I want to hear can you get the system really loud?
@paulsibayan9957 Ай бұрын
Jonathan do you have a repair shop or home based?
@jonathanjovenal Ай бұрын
I had my own shop in San Diego, CA from 2017-2023, but I ended up landing a great position as an industrial mechanic. I still work on cars and rebuild these transmissions out of my home garage though.
@paulsibayan9957 Ай бұрын
Congrats on the employment. I have a 91 Integra and while it upshifts perfectly from 1st to 5th, it will not downshift into 3rd. Transmission needs to be rebuilt. The car was in San Diego (Eastlake) until I relocated to Southern Utah three years ago. Question: if I find a shop that can/will do the job, how many hours of labor would be needed?
@jonathanjovenal Ай бұрын
@@paulsibayan9957 I estimate 5-10 hours for transmission removal and reinstallation into vehicle, and another 5-10 hours for teardown, cleaning, inspection, checking clearances, and rebuilding. Timing depending on the mechanic and how efficient or meticulous their work is. Time wise, I usually take longer since I am very meticulous.
@paulsibayan9957 Ай бұрын
Yes, you are meticulous. A trait I inherited from my Pinoy father. He was an aircraft engine mechanic and a pastor. Thanks for the info it will be very helpful someday.
@johndutton4860 Ай бұрын
my 5th- Resvese hub had to be pressed on with a socket and dead blow but it was new is that normal ?
@jonathanjovenal Ай бұрын
@@johndutton4860 That is normal considering it is a brand new component.
@johndutton4860 Ай бұрын
@@jonathanjovenal just had to ask all the hubs are new but that was the only one i had to do that with lol
@boostboyracing Ай бұрын
Isn’t there a washer on reverse gear shaft at the bottom
@midnight694k5 Ай бұрын
Your video not perfect to see it don’t know how to follow your by step
@dlo0315 Ай бұрын
Hi sir, how can I locate the speed sensor easily without disassembling the entire transmission and engine? My car's speedometer cannot show the speed; it always stays at 0 km/h
@jonathanjovenal Ай бұрын
@@dlo0315 Hi, the vehicle speed sensor can be accessed for troubleshooting and/or replacing with the transmission still in the vehicle. Disassembly is not required.
@dlo0315 Ай бұрын
@@jonathanjovenal
@johndutton4860 Ай бұрын
so if the first rubber piece does not get installed right on the countershaft what would happen ? my b18c1 trans was just done at a shop and i had to drop it again out of my car because it was all messed up long story short i have the case apart when i pull the slider down into first gear by hand i can not spin the shafts at all by hand it is bound up that is the only gear that i can not spin by hand i am thinking this shop screwed up the that rubber piece
@jonathanjovenal Ай бұрын
That rubber piece on the countershaft will definitely make the gears bind if not installed correctly. It may even jam up and not allow the various components on the countershaft to be seated correctly when torquing down the main nut.
@johndutton4860 Ай бұрын
@@jonathanjovenal took apart the counter shaft mine was not install correctly and it bent all the tabs so i need a new one ..... and i also found 2 pieces of metal binded in there as well that look like the edge of a synchro
@ВикторМалюгин-г1н Ай бұрын
246 Yundt Field
@AarahN Ай бұрын
Thanks for this video with no editing and cuts! my module is in behind the dash and I can’t see it unless I take everything apart. Now I can do the calibration watching the video at the same time knowing I am completing it correctly without needing to look at my module.
@jonathanjovenal Ай бұрын
@@AarahN Glad the video was helpful! Thank you for watching!
@bradr539 Ай бұрын
$2200 price, was $800😮
@cameronwilson192 Ай бұрын
You uploaded this TWO years ago, I just wanted to say I have watched you like you're Dom Toretto. I'm currently at the 1:25:47 mark. Just thought you deserve a MASSIVE thank you and well done. This truly is an absolute brilliant video. The fact it's 2:15:16 in total, the extra time it must have taken to fuss around with the cameras and some of the lighting. Just wanted to give you a big shout out from England, UK from a new MX5 ND owner, who is now going to subscribe. Brilliant, just brilliant!
@jonathanjovenal Ай бұрын
Thank you for the kind words bro! I appreciate you taking the time to watch the video!
@John-ts1on Ай бұрын
Amazing video super helpful
@jonathanjovenal Ай бұрын
Glad it was helpful! Thank you for watching.
@mariacab1301 Ай бұрын
Get to the point Johnathan! Just kidding ❤
@Roxana_Official Ай бұрын
u talk to much. just show the damn thing. ugh
@abhishekabj Ай бұрын
Anyone please difference or give the order which display is best IPS. WUXGA. OLED please......
@LeeSylvia-q4d Ай бұрын
760 Roger Estates
@Trevocracy Ай бұрын
Is that the 12" handguard?
@jonathanjovenal Ай бұрын
Yes it is! I have links in the description for all of the parts I used to build this rifle!
@Trevocracy Ай бұрын
I was thinking about getting a 9" or 10" and throwing on either a vertical or an angle grip.
@adammorra3813 Ай бұрын
Thanks for doing this comparison.
@larsa22 Ай бұрын
23min into the clip. Does this apply to a Y2 gearbox from a Civic VT (EE9) aswell? That gearbox dosent have the stop plate under the gearset that prevent it from ”falling” down so i would put the ”stop” on the hub down. Anyone that done these and can tell me before i put it togheter? ❤
@sharathSizZle Ай бұрын
Roflmao... why are everyone going for 8k avr when NONE of the equip in the market have 8k display 🤔
@jonathanjovenal Ай бұрын
@@sharathSizZle So that we don’t have to buy a new receiver when the 8K TV’s come out in a few years. I like to keep a receiver for at least 8-10 years before replacing with an updated model.
@John-ts1on Ай бұрын
Outstanding video with all the torque specks👌 thank you.
@BurlMarietta 2 ай бұрын
7955 Rolfson Green
@gordonsmith9263 2 ай бұрын
Thanks Jonathon. I'm doing the same thing to a 2004 Highlander. I was wondering why the entire fuse box was lifting when I was trying to pull the fuse out. You've enlightened me.
@DeQuinceyBenedict 2 ай бұрын
0144 Raynor Mountain
@patrickstarr87 2 ай бұрын
How cool! Thanks for sharing bro 🙏🏻
@jonathanjovenal 2 ай бұрын
@@patrickstarr87 You’re very welcome. Thank you for watching!
@txbob5978 2 ай бұрын
Hi Jonathan, I have a Colt OEM 2 rifle with FDE grip and stock so I'm looking for an FDE color handguard rail that will fit it easily. Do you have any suggestions, please? Because the C4 Rail in FDE is $395.00 which is way out of my budget range.
@hondateam248 2 ай бұрын
Love this video! Thank you
@jonathanjovenal 2 ай бұрын
@@hondateam248 Glad you enjoyed the video! Thank you for watching.
@MAIEMI 2 ай бұрын
Amico mio se il problema era il 1080p del ricevitore, mettevo hdmi della console sulla tv, e tramite hdmi EARC o ARC inserivo hdmi sul ricevitore sony, cosi avevi risoluzione 4k della ps5 e l audio 3.1 o 5.1 , quello che poteva dare il sony ugualmente, io ho un Yamaha 7.1 a 1080p, ma non faccio passare il segnale video dal yamaha, ma solamente l'audio.
@balladan2029 2 ай бұрын
hey fam i was about to open mines, Popped it up a little bit then closed it back without bother going in, will i need to seal again?
@jonathanjovenal 2 ай бұрын
@@balladan2029 What up bro, yes you will need to reseal it. It will for sure leak if you don’t reseal it.
@gee-z4g 2 ай бұрын
anybody know where to get shims for the main shaft / i close the case and the pilot shaft wont spin too tight / everything is good to this point any suggestions
@jonathanjovenal 2 ай бұрын
@@gee-z4g You can only buy the shims from Honda/Acura. There are various online Honda/Acura OEM parts stores where you can find diagrams and part numbers.
@tommik1283 2 ай бұрын
I see that they include a 2-pin adapter, which unfortunately was not mentioned in the official description and product pictures. As a result I bought a different brand with 2-pin...
@hindsjohnson 2 ай бұрын
tank yuh bredda
@Mike-ry4ti 2 ай бұрын
Awesome, thank you!