Nice, was it an Acura MDX? I sold the Mustang a while back, but now have a 2022 Mach 1. The MDX is my wife's car. Are you local to the SLO area?

@user-ro4wb8do3x No, I never had a problem. Every so often, I would hear a click noise when the car moved for the first time of the day, but aside from that, no issues. Why would you need a shop to install them. As you see in the video, it is really easy.

Does what affect warranty? The Tune? Any warranty claim could be denied if they can determine that your modification directly caused the issue. I had my engine replaced under warranty after this video was posted, so in my case...NO.

Which file are you asking for? I no longer have the Ecoboost.

Thanks, I sold the Ecoboost and got a Mach 1. Should have some new content soon.

Thanks for the feedback.

I am actually trying to sell the Ecoboost. I recently bought a 2022 Mach 1 HP.

I would think so, but not really sure. I would send an email to Ryan at PD Tuning and ask.

@@mustangmodsecoboostgarage6539 no worries thanks

@@mustangmodsecoboostgarage6539 so when you had the final pd tune done was it a really big difference compared to stock? Has there been any issues or has it been pretty smooth sailing?

@@xrmte Yes, I probably went up to about 375 WHP and over 400 WTQ with the E30 tune. However, I pushed my car too hard with the stock turbo and block overheated causing a warp and the head gasket blew. I had everything replaced under warranty though and have not gone back to the E30 tune ever since.

yes they do transmission configurations

Just keep in m8nd that it is very difficult to remove or change back to stock Tune if you ever need to. See my video about the Cobb access port and Galpin Auto Sports for further explanation.

@@mustangmodsecoboostgarage6539 is it? I heard you just go back to the dealer or keep a log on a USB for the stock tune

@BrayZap Unfortunately, this is not the case. When you load the file, even when making a backup, it locks your PCM. I took mine to the dealer and they would not touch it for insurance reasons. That's why I went to a Ford Performance authorized center, Galpin Auto Sports in LA. They were able to loaf a factory Tune file using 'As Built' data, basically resetting the PCM. After that I was able to load my Cobb base map.

I would just search for a Hubcentric Spacer that fits your mustang and get the size that you like best. I went with 1" because I like the way the wheels in the rear stick out a bit.

I usually do it when I change the oil. Not really difficult at all.

@@mustangmodsecoboostgarage6539 it seems hard to get ur hand in there to screw and unscrew

I have a calibrated elbow.

​@mustangmodsecoboostgarage6539 ....I totally get it. I too installed the BMR kit on my 2016 GT. Wished I had purchased the Steeda kit. Over all the Steeda Mustang Parts are a step up in fit and finish from BMR.

Use a die grinder and cut the plastic. I personally don't care for the open look, it doesn't look finished or complete, or whatever; but too each their own.

I got it from the ZL1 Addons website, just added it to the order for about $25.

zl1addons.com

Yes, I had a FMIC and larger intake tube with K & N filter. The Temps in LA are brutal nine the summer and after a few pulls the car started to get hot.

same lol going with eibachs 25mm

I had an issue with my head getting warped. It was covered by warranty, but I do not run the Tune anymore.

@@mustangmodsecoboostgarage6539 With the ford performance tune or the PD tune that I see you installed 7 months ago caused this problem? Never heard anyone having a problem like this from the Ford performance tunes.

@@johnr3734 which problem are you referring to?

@@mustangmodsecoboostgarage6539 the heads getting warped.

@johnr3734 I was running the E30 Tune from PD. I am not blaming them for this issue, however. It is due to the poor design of the engine and the stress that I put it through at the race track. The thin walled aluminum block and head just can't handle that much heat. That us why I am not racing right now. I am waiting until I can afford to swap out the block and get my large turbo kit before I get back into it.

I don't know, but if you check the ZL1 Add-Ons website they nay have one that is made specifically for that spoiler.

Ryan Martin sends the instructions in an email. I think I cover the process in one of my videos.

Not really, I have not been to Willow Springs since we moved over a year ago. Good luck.

This is the same struggle that I went through. The FP Tune is good if you do not plan on changing to a Pro Tune in the future. Otherwise just get the Pro Tune now.

@@mustangmodsecoboostgarage6539 exactly my thought, is the FP tune noticeably different? Thats the other thing i struggle with, i wish so badly i could drive someones car that has the FP tune and see what it feels like. Other thing to note is i just want to livin up the car more, im not a huge performance race kinda guy

@@BrayZap The FP Tune was not that noticeable at first, but then I started adding in some 100 Octane Race Gas and it woke the car up. I live in CA and we only have 91 Octane so it didn't feel noticeable. By adding in some higher octane fuel I was able to get a mixture that was close to 94 Octane which was a noticeable difference. It shave off about .5 seconds on my 1/4 mile time.

@@mustangmodsecoboostgarage6539 appreciate it, we have 93 here

He always responded to me within the time frame listed on his website. I think it says 2 - 3 days.

Yes, built block and big turbo. I was thinking Borg Warner 8474 www.full-race.com/borgwarner-efr-8474-turbo

Watch my video where I go to Galpin Auto Sports. I had this same problem and had to have them reflashy car using "As Built Data". I had called Ford Performance about this issue and they actually covered the cost that Galpin was going to charge.

The PD Tunewas great. It added the needed horse power and running E30 got me up to about 375 WHP and 400 WTQ. I raced it several times and my best 1/4 mile time was 12.6. I had an issue with a blown head gasket recently and took the car to Ford. They found the engine block and head had both warped from excessive heat. I was able to get it fixed under warranty and have not pushed it since then. I may go back to the E30 Tune once the new engine is broken in, or I may decide to play it safe until I get a built block.

I can make over 370 hp with my E30 tune.

@@mustangmodsecoboostgarage6539 I probably could make a lot more too since my tune is pretty conservative but 93 octane tunes are where its at for me.

I was living in Lncaster when I filmed these. We moved to San Luis Obispo recently which is why I have not been doing as much racing.

@@mustangmodsecoboostgarage6539 dang that’s crazy I live in Rosamond! Lol

@@mustangmodsecoboostgarage6539 i live in Pismo. We should have coffee

@@coach765 I am down.

I don't know as I do not have that spoiler. I would reach out the ZL1 and ask them directly. If not, then they may have something that does fit your needs.

I have a Tune with PD Tuning on E30 making about 375 WHP 400 WTQ

I was not getting a dyno Tune, only baseline numbers. I increased my HP to 375 with a Tune from PD Tuning.

Take notice if it happens after rain or a wash. If so then probably the same issue. My issue has not returned since I put the sealant in the connections.

Excellent, I will watch it.

yes i just washed mine and now I had that sound too... I think it's a shorted out speaker combined with the fake engine noise. I noticed my "spoke noise" increased when I revved the engine. It also makes my Siri voice sound horrible and distorted. So annoying

@@derrickroberts1178 this fixed my noise completely.

I ordered them from here. I wanted my car to resemble the 1970s Mach 1 Twister Special. www.promotorstripes.com/collections/ford-mustang www.mecum.com/lots/FL0121-444489/1970-ford-mustang-mach-1-twister-special-fastback/

Yes, I have bothered decals but mot both tunes. I am tuned with PD Tuning, but purchase my plugs and some other parts from Tune Plus

@@mustangmodsecoboostgarage6539 but why !!! When tune plus so much better!!

What happened? Were you able to fix it?

@@mustangmodsecoboostgarage6539 I have not tried yet but Ik got it all in to find out that one or two didn’t line up l

Seems like Hou didn't mark the holes in the correct spot. That's why I started in the middle and had someone hold it up while marking the other holes. I hope you can fix it. You might try going to a bigger size, or widen the holes on the wicker bill to fit the holes you drilled on the spoiler.

This is the Standard finish. The tinted finish is see through and smoked for both pieces. Mine only has the smoked, see through piece in the middle.

@@mustangmodsecoboostgarage6539 awesome! I’m definitely going with this finish. Great video by the way.

@@izaknavarro23 thanks.