$5900!! The previous ones were under half that.

This type of industrial extractor has been common in Europe for quite some time. This one may seem a bit pricey...but how much are your lungs worth?

Looking forward to their new cordless trim router

Thank you!

Why would you even show the Makita Nailer without a release date. 😢

should get someone who isn’t crossed eyed 😏 with those lines

Its crazy that dewalts had a 4 bank charger that charges all batteries at the same time for years. It's kinda pointless to have a "gang box" charger that can't keep up with a crew

This method is nice if you have the option to send the half wall studs through the floor. Otherwise I do recommend these 0.220 in. x 5 in. T40 6-Lobe, Washer Head, Strong-Drive SDWS Timber Screw into the half wall sill at the floor joists about 1" in from the edge of the sill. Then a piece of 1/2" ply on either side of the wall and you will be amazed how strong that half wall feels. Even sheetrock or tile backer will do the trick, nailing off the ply at the sill and up the studs and that wall will be rock solid. The thread length is 3" and so with a 1.5" sill and 3/4" subfloor and a 5" screw you will be near the Wmax of 590 LB. If you're going for a half wall railing you can amp it up to the DTT1Z with a 0.276 in. x 8 in. Strong-Drive SDWH Timber-Hex HDG Wood Screw. These have a 900 lb rating and are anchored to the stud instead of relying on perpendicular grain compression at the sill to the lobe head. You need 3 of these to meet the 200 lb impact rating requirement for a 2x4 wall. And I recommend at least 1 in the opposite direction to avoid having these pull the wall out of plumb. Again use 1/2" ply on either side and make sure you secure the wall plumb with a brace when you nail off that ply. It will be trying to pull out of plumb on you. You can slam into this wall full force and it won't budge. If you need to add a block for anchorage in the floor the reverse hanger is okay. I really like the A34 clips with #9 x 1-1/2 SD's. These have a 600lb seismic / impact rating, and are pretty easy to install. use 1 of these for the Lobe Head and 2 for the DTT1Z at either end of the block and you're groovy. Courtesy of your friendly neighborhood structural engineer

When does the boss circular come out?

Might have to try a pair, but gonna be hard to beat my Blakladers...the biggest concern is the fit... Milwaukee sadly seems hard to guess the sizing for me...

First...Thanks for sharing Rob 👍👍 secondly since you have some, how long have you been using this specific product the new panels that is? I think my biggest worry would be the zippers....I swear nobody seems to be able to make decent and lasting zippers anymore... whether it's on clothes or dust bags...etc. TIA for your input and opinion.

I think Echo has upgraded their saws substantially since 2023. I saw a review by a very good reviewer, who liked Echo the best in 2025. And I never saw a Stihl ranked lowest decibels in recent reviews. Stilhl was always the highest decibel saw. What happened? Also, the rating for stalling out a saw is kind of pointless. Each saw has its sweet spot when it comes to how fast it cuts through a log and that’s the pressure you want to apply. Any harder, or softer, slows down the cut. What counts is how fast you can cut through a log of any species of wood.

I used the magnetic zip for a Reno job last year, it worked flawlessly, my wife was a happy camper about keeping the rest of the house dust free!

Why do we need to cut so many nails in a 2x4?

super pumped about the new Bosch lineup!

😎🛠️😎🛠️😎

you must protect your lungs or you won't be buying anything. I lost both my parents over lung failure

When I'm buying an extractor I want to know about suction not about filters. Filters should be secondary.

😎🛠️😎🛠️😎

Excellent, I am within a week or two from installing my Schluter Kerdi Shower. This vid was very helpful. Thank You.

SO JULY TO END SEPTEMBER BUMMER HAVE $279 SAVED UP JUST FOR THIS

Essentially, this has the exact same stats as the EGO commercial backpack blower with 2 10amh batteries. 5 min less runtime and probably twice the cost?

Purchased this snowblower in November 2023. I'm in Eastern Ontario. Clogs constantly. Always had to finish with a shovel. Battery life was dismal. If you don't have at least 1 or 2 extra sets of batteries, there's no way this thing would ever clear the 16 parking spots it promises. I took it out this winter and it wouldn't start. The DeWalt factory service repair place is more than an hour away. They said it would take 4 to 6 weeks to fix and cost a minimum of $500. There doesn't seem to be parts available for it and there's no troubleshooting support etc. Keep in mind, they were saying it was going to cost a minimum of $500 to fix before they even looked at the unit to diagnose the problem. Took it in and they said it was running fine. Got home, wouldn't start. At the factory service repair place (Ottawa), the manager tried to gaslight me and accuse me of misusing the machine. He specifically said that this unit isn't meant for driveways, and I should know it's only meant for walkways. He also said I shouldn't have stored my snowblower in the garage because it's too cold (Yeah, you read that right!) Things got a lot worse really fast. I was discriminated against, yelled at, etc. I was a big DeWalt fan before this happened. I have the new electric lawnmower (I don't recommend it), the electric chainsaw, string trimmer, various saws, drills, etc. but their customer service is beyond terrible. They don't back these new electric snowblowers and they don't value their customers. Thankfully Home Depot agreed to take the unit back for a store credit even though it was way past the return date. I don't feel comfortable purchasing from DeWalt after this experience and I sure as heck won't feel comfortable going to the factory service place in Ottawa while that manager is still working there. I do NOT recommend this product.

$25.00 ain’t bad, given that it performs as advertised. And of course there will be a few blockheads that will try to cut through an iron beam and complain that it sucks.

Ugh. It didn’t close back up and the other sales lady sneaked in and tapped it shut.

No offense, but honestly she really didn’t get me jazzed about buying into the sheets. She doesn’t seem to even know how to use them or speak clearly on the benefits. Yikes.

Was the Diablo the Demo Demon? They never showed it.

Pretty gross you still make 1 even though it’s clearly inferior to the other.

I take back my previous comment $25 in the US retail is reasonable. Hopefully we see these in Europe/UK. Thumbs up.

They need to let you have the tool and demo it - and before getting all brave and flashy they need to say the prices on a 165mm blade, 190mm blade and 235mm blade. I bet it's over $100 or £100 here in the UK. Rarely do I ever need to go through a nail. Could be different in the states. Comment and thumbs up for the algorithm.

I want them work on a 101/4 rear handle or sidewinder like the one they have corded

2:45 😂

Where’s the dust collection!?!?,

Any whispers of a Gen 2 Super Sawzall in the works?

Looks like they copied FLEX but rightfully made it lighter.

i really want someone to make an 8 1/4" rear handle saw

Was it the newest generation demo demon?

Yes! Been waiting for this.

No demo? That’s an interesting choice

I have the old one, and its not bad. Adding a 8ah Forge battery to it really made a difference. My biggest complaints? Its a bit of a tank and the safety switch sucks. The new Forge batteries, better motors and cutting a pound and a half off should make it a far better saw.

The previous pants have zero room for any ass.

Is Diablo good, well of course they are, but don't be so quick to dismiss these Milwaukee blades. I have used a lot of the white blades, and had really good results from them. Of course I have not used these new blades, but I am sure they work well. Yes I like own and use Milwaukee, but am N O T a FAN boy!

Day 624 Asking Milwaukee to release that damn packout rolling front drawer.... (ノಠ益ಠ)ノ彡┻━┻

Lololol all that dust blowing at the end 😂 That dust extraction is balls

But what makes it better?

I see it the first time using a plunge router 😂

You are doing a great job! Can you help me with something unrelated? I have a SafePal wallet with TRC20 USDT in it and I have my recovery phrase: 《pride pole obtain together second when future mask review nature potato bulb》. How do I transfer them to Binance?

I haven”t owned a cordless saw in close to a decade that doesn’t shut off when it senses a bind or kickback…standard.

Maybe have a lower cfm for a better run time. 20 minutes on high is ridiculous for such a large battery

The problem with these tests is they pretty much always make the competitor’s product look unusable. I know from personal experience the Diablo blade pretty much never gets caught up or slows on nails. I’d believe the new Milwaukee blade could be faster/better but when the “test” shows the competition to be a horrible product I get very skeptical