This is how a review should be made. Thanks, finally a real-life situation

How do you fix small burn hole in Olefin foam pad? (chair seat)

In the first video clip while you were welding that seam, was that machine, with the roller, equipped with a roll seam foot?

What do you mean the Neoshell is “slightly more permeable”???? It is clearly twice a permeable from your machine. I’m fact I have been a devotee of gore Tex for nearly 40 years and have always bought it for their guarantee, which I have had to use once, 30 years ago. 5 years ago I thought I would try Neoshell, as the breathability was rated extremely high. I decided to by a day to day rain jacket and was VERY impressed by the dramatically better breathability and lack one condensation build up inside the jacket. In addition it did not leak and I was convinced that from now on I was going to switch to Neoshell, as it was more comfortable. However after about 4 years, I started noticing that the inside was getting wet and put it down to the breathability being compromised, and me having been sweating more than usual. However these damp patches on the insides of the shoulders became more and more regular until in one heavy storm I got soaked. There were no obvious tears in the fabric or erosion of the inner membrane however I was soaked and the jacket was leaking badly. I was very disappointed, having thought I had found a better gore Tex substitute. Sadly because of the membrane deteriorating after about four and a bit years, I have now lost confidence in the waterproofness of Neoshell, even though it’s breathability was superb. Sadly I have gone back to Gore-Tex and hope the pro version I recently bought, will breath annoys as well as Neoshell.

you still need a solar battery charging module at about $5...

I have 2 of these & love 'em. Splash a bit of alcohol in the bottom & prime it for better prrformance.

Thank you for actually demonstrating the flow of these. I held back from buying one because I wasn't sure if the flow would be nice or not

The pressure in these canisters almost instantly increases to very usable pressures just by taking them out of the freezer. It would be a better test to keep the canister submerged in ice and water (32°F) to better simulate a cold weather situation.

Thks

Connecting two dissimilar batteries in parallel is a terrible idea. You're going to damage one of the two batteries.

I hate the name solar generator. It's such a stupid name.

Socks?

Hi guys I know this is an old video and I didn’t know if your channel is still going but this is really useful content. Do you think the wax coating on the treated down would make it prone to clumping, especially when exposed to higher temps when the down is compressed (between your back and a backpack or backpack straps for example)

How did you manage the heat generated due to longer hours use

Thanks guys. My dog ruined my brand new bath mat by scratching it open & you're what I found on the internet as a solution. Gonna do needle & thread plus seam seal. Cool to learn about Tenacious Tape even as a homemaker!

C est pas serieux .....

Man, talk about controlling. Quit interupting the guy and let the the dude tell us about the bags, or do the video yoursellf.

Mostly Harmless brought me here.

Thanks for the great video on a subject I know absolutely nothing about. Making a basket to hold my dog on my kayak, so very low tech. Have some ripstop sitting around that I'm going to use, so I was concerned about which products would bond that material. You've answered every question that I had. Gonna give it a go.

Thumbs up just for the dog !

U can charge phones and use 12v lights easy, homes need dual electricity system

I have a camping hammock the underside has a small dime size spot the nylon protecting coating got wore off. The nylon isn't ripped, jus the coating has been scraped off. Suggestions for best way to permanently fix it?

What boots would you recommend for Mera Peak? Thanks

I'm searching for a Dana Designs Racer X, or an example of one. What would be the modern equivalent?

Be interested to know how several manufacturers’ utilisation of hydrophobic treated down, higher feather to down plume ratios & more sophisticated(trapezoidal, box-wall) baffle construction techniques have modified your recommendations over the intervening decade? Kudos on an insightful & thought provoking video. Regards.

Fun fact: Pigs can't sweat

Very good video! Short, straitgh to the point and very well explained. I was using Scarpa Maestrale with diffrenet Alpine bindings and they fit with all standard alpine bindings, but safety release might not be optimal.

ty for explaining from a more scientific approach, I was very skeptical about the claim of merino keeping you warm when wet. Most marketing claims make it sound like the merino can be completely drenched and still keep you warm, but this explanation helps clear up the reality of what it can and can't do

So, you didn't weld the nylon, you just melted tape between the pieces of fabric? I swear that's what I saw.

Great explanation. Thank you!

Might be good enough to tow some gear behind a better raft

1/2 an hour using 1/2 an ounce is what I can live with using a smaller pot NOT CUP a 500ml-600ml or a 700ml to simmer cooking rice (& beans or with chicken) or heating up frozen TV dinners! Real cooking & maybe breakfast (eggs, pancake & bacon) that’s what some people should look at & not the boiling water for rehydration of foods Thanks for the insight I took as POSITIVE for MY needs!

Awesome review I just picked this up second hand

Is it breathable? And does the water proof last forever considering it stays immigration ripped

sooooo helpful, thank you

A piece of JUNK of a stove! My DIY fancy feast stove take 45 seconds FLAT and put your pot & you’re already off to the races! One minute and over for priming takes just way too long!

I had one but sold on eBay cause I needed money. I loved that stove, and wish I still had ut

Therm-a-Rest NeoAir XTherm Leaks out the WingLock Valve /// I got a new one and does the same! slow leak.. Test your Valve by using a bowl or pool or anything that you can get the Valve underwater, test closed and open and see if your mat does leak before you go on the trail.. I even pop the top off and i was surprised it does not seat down to the rubber gasket! This would be easy fix for them, they just need the inside of the cap to have the round plastic under the cap to set more into the Tube around the rubber seal.. wwjd

Sewn construction is still going strong..

The problem with using any tape is you can't really use it on anything with intricate curves.

Haha i know im years late but had to check the video as well, looks like he mixed up the jars, seems nikwax is the winner

Succinct.

Thanks for the tips. I want to secure the edges of one layer of rip stop over another layer of rip stop - sort of like a permanent tent fly. Do you think small grommets/eyelets will hold in the ripstop?

what is that stand/holder called?

Just got my sumo .. thanks for the video !

Thank you!

I am thinking to buy this but you should at least make it stand

We have used the kzbin.infoUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!

感谢分享😊

Bonjour is it a good item ?