Hmmm? I hadn’t thought about that!

Thanks. I thought I was going to have a relaxing summer with plenty of spare time 😂. I’m not sure how I ever had time to work! 😉

Thanks 👍

My preferred method is the last one. Using my foot on the back leg of the chair. I should have shown that first as some stop watching before seeing that. Anyway, I’m glad to help and appreciate your taking the time to comment. You can also financially support my efforts by clicking the Thanks tab below and right of the video. Not required but always appreciated even just $2 brightens my day. 😁👍

Yes! I’m still loving mine too😁👍👍 Thanks for watching and taking the time to comment.

Ich bin kein Experte, aber ein Unkrautvernichter hat ein ähnliches Vergasersystem. Hier ist ein Link, der Sie weiterleitet. Es ist auf Englisch, aber die visuelle Darstellung sollte hilfreich sein. kzbin.info/www/bejne/mqfCgWSQr5yXiJIsi=m1jAKsbpELFLJn8W.

@@BoilerDan1 Danke aber der hankai hat nur eine Schraube.

Sorry; Here you go: kzbin.info/www/bejne/pXXOh4mCZah9p80si=4EM7p_5EzMFp6YtV

Happy Dance!😁

Here’s a link that has similar carb. Might correct your issue with bogging down when you accelerate? kzbin.info/www/bejne/mqfCgWSQr5yXiJIsi=m1jAKsbpELFLJn8W

Hmmm; I’m no expert but I’ll give you some possibilities. No water: Two possibilities 1. The tube is blocked 2. The impeller wheel is broken. The cooling system is very simple. Down near the propeller there’s a plastic impeller that spins with the drive shaft going to the propeller. If the propeller spins, it pumps water unless the plastic fins have snapped off. I’m guessing that there’s a clogging in the tube or something like that. The cutting out when full throttle is probably an adjustment to the carburetor needs done. Look up small engine carburetor adjustment on KZbin as the process is pretty much the same for most small engines. You might just change the carburetor? You could also experience that if you’re running it with too much oil mixture in the gas. I’m going out of town today and will try to get you some more information when I get back home tomorrow. Hope you can get it going as I’m sure you’re a little frustrated!😩

Here’s a link to the manufacturer in China. 1. On top right of the page confirm that English is selected. 2. On the upper left you’ll see 3 horizontal lines. Click that and select “News” 3. There are several options there of interest including troubleshooting. Should be confirmation of the proper oil to gas ratio too. Hope all of this helps 👍👍

I looked up the fuel mix. Here’s what they recommend: And the mixing ratio of the fuel HANGKAI two-stroke outboards fuel used for lead-free number from 90 to 93 two-stroke gasoline and gas oil (TC-W3) mixed oil. The new machine in the running and fuel oil during the volume ratio of 25: 1 (ie, the oil content of 4% gasoline); After the run-in fuel and oil volume ratio of 50: 1 (ie, the oil content of 2% gasoline) ……………………………………………… I will mention that the break in oil volume will result in some oil residue. It could also cause the issue when running full speed…. Maybe do 35/1 and see if that helps? Once you get the 10 hour run in, the 50/1 mix will run clean and smooth. If you’ve watched all of my videos on the motor, I also changed the spark plug.👍👍

Update: Your carburetor may only have 1 adjustment screw. Here’s a video on that: kzbin.info/www/bejne/pXXOh4mCZah9p80si=4EM7p_5EzMFp6YtV

I’m not experienced with the Android compatibility. But you can still fly with the controller. Sorry to not be able to help. Thanks for watching 👍👍

It's your lucky day! It is shown in one of my video's: Here is a link - kzbin.info/www/bejne/hHSkfYdpgrB0e80 (PLEASE READ ALL THE BELOW 1ST) I can tell you very easily too: 1st you remove the pin holding it place. Kind of looks like a bobby pin. You will need to bend it back straight so it will slide out. Then take a flat head screwdriver and gently rock it between the propeller housing and the motor housing. It shows within the first minute in the video. Lastly, if you find the series helpful, and you have extra finances 😂.... Consider clicking the "THANKS" button below and to the right of any of my video's. You can then reward me financially for my help and efforts. Not required, and you would be surprised how even a $2 Thank You can inspire me to continue in my efforts. Regardless, thanks for watching and I'm happy to help out.

You’re welcome. You are not alone, over 56,000 have watched this video. If you want a good laugh, look over the comments section 👍😂👍

I never said that it’s a great motor. I just bought it to play around with, knowing it might be a lot of work. But that’s what I wanted. It worked for me and I didn’t spend much cash. You’re right in buying quality is the best option. But I had fun working on the little beast! Thanks for watching and sharing your thoughts. 👍

No. At least not when I purchased mine, but that was a few years ago.

Once you finish breaking it in, it runs clean…. But it’s a bit loud! 🫨

Yes, with a few exceptions. Mine did fine but the fuel lines didn’t last very long. But when replacing, the new ones are made for use with the newer fuel types. I’ve seen ethanol free fuel in containers in like the outdoor departments in some stores but it’s pricey. Just swap out the fuel lines.👍👍

Haha….. I once tried capturing a spiderweb to put in The Black Pearl…. Not to successful. Then I wondered, “What if I caught a real spider and released it inside the ship!” I gave up on that idea…. I’m on a bit of a hold while I make some small items for a gift / art shop in Port Royal SC. But I’ll get back to the Flying Dutchman asap.👍👍

Good tip. Thanks 👍👍

So I’ve been told 😂. Just read through the other comments. If you’re really really thankful, click the “THANKS” button bottom right of the video. Not necessary, but some people don’t know that you can reward masterpieces on KZbin 😂. Regardless, I’m glad to hear that you appreciate my work 👍👍👍

Yep, you only have one life, live it with someone fun! Thanks for watching and taking the time to comment. Take a victory lap while you’re out on the water 😎👍👍👍

😂 Thanks to an observant regular viewer, I’ve got another repair job to cover in the next segment. I’ve got a couple of smaller builds that I need to finish that I agreed to make for the Mrs B’s art and craft shop in Port Royal, but I should be back at it in a week or so.👍👍

I think I understand, I noticed it but thought maybe something will go there. I’m taking a few days break then I’ll see what I can do. I can fairly easily remove a plank or and cover it. I may ask a follow up question in a few days. Appreciate the help 👍

I went and looked. I’ve had ships that the bulkheads stick up and you cut them off at some point….. I remember thinking, ….Did I cut them off and forgot? But I see what you’re saying. If I had planked over them, they’d be out of sight. I’ll give it a try! Thanks again for helping me out. Some other novice builders will no doubt learn from my experiences 😂👍. I’ll post it in my next chapter. 😁🏴‍☠️

@@BoilerDan1 I think I over explained it but yes, the deck planking should cover those bulkhead notches. I’ve seen it enough times that I think Occre should make a point of attention but then again maybe they’re not getting that feedback. Easy fix if you’re not too far ahead in the build. Looking forward to the next episode.

Thanks; So that means you knew before I revealed the secret if the wasps? 😂. I’m not decided yet on the final finishes? I will definitely stain all the wood but will consider coming back with an airbrush and create some illusion of strange….. I’m not sure what I mean by that, but that’s what is in the back of my mind.😂🏴‍☠️

If the prowler model is a hard shell, it will work much better than on the air filled raft that I had. The raft is too spongy causing a loss of thrust. You can break the motor in by taking it out on the river too. Just very your speed from time to time. Go up stream, then you can always drift back to your starting point.👍😂👍 . Enjoy your adventures, and thanks for watching. 👍

@@BoilerDan1 Thanks. The Pond Prowler is a hard body boat. I think the motor you had will work well on it..

@jjp95136 I agree 👍👍

You’re welcome. If able and would like to support and reward my efforts, click the “Thanks” tab below and right of the video. If you’d like a good laugh, read the previous comments regarding the video. Enjoy your beach visits and ability to pack up and go, stress free 😂👍

Read through all the other comments before yours….. some will leave you laughing and realize that you’re not alone! For those wanting to support my efforts, consider clicking the “Thanks” tab below and to the right of the video screen. No required, but always appreciated. Thanks for watching and sharing your experience. 👍👍

"Skeleton" is the word

Your English is good. There are different versions of the Black Pearl. It sounds like the one you have isn’t from ZHL. My first one wasn’t either 😂👍. Bottles: take a small dowel rod, then sand or file down the top to get the shape of bottles. Or make them out of children’s play dough, let dry and get hard, then paint. Bones are bit harder. But there are very small rib like bones I have found when I eat chicken! Save them, clean and let dry. You can trim them to make smaller….. might be able to form some leg / arm bones too. The scull might be difficult, but forming one out of clay might work? If you can find someone that has a 3D printer, they might be able to make some of the items that you need. ……………………………………………… More thoughts: Small tips of wooden tree branches that you could bend while freshly cut and form legs, arms, even fingers 😂. Time to get creative 👍👍 I’m just getting started on The Flying Dutchman. Check it out sometime: kzbin.info/www/bejne/pKbHc3WMfqqhd6Msi=J_DIKZnBbSUWvkaY Enjoy building your Black Pearl 👍

​@@BoilerDan1Yes, it's the Pearl from ZHL. And thank you very much for the ideas. It helps me a lot. 🌬⛵️

@hannoschattauer6980 The Golden edition doesn’t provide them , but in the All Scenario version that I have they were? You could contact ZHL and ask. I have a contact person listed below: Contract is: Max Zing at email [email protected] If you make your own it will be a better treasure as time passes 👍🏴‍☠️👍

Yes, I asked ZHL. If a don't get an answer than I would ask this man. I just have another idea: I could take one of the 3 sets of bones and cut it in small pieces to make a New skeleton. Do you know what I mine? And for the missing botles I bought this material to form the things and after drying it get hard. Knete?😂 with this I also can make things the table.and for Dekoration. 😊 OK nice greetings from Germany!

All the springs were too heavy so I ended putting in a very light spring that I picked up at a hardware store. It did much better, although it may have been so light that at idle the prop may have still been too. That was fine with me. I’m getting a little older and sold the system. That person was familiar with the motor and thrilled to have mine. I’d have been happier with it on a hard shell small boat….. The raft was a little too spongy causing it to lose thrust. But I had a lot of fun with it and would do it all over again.😂👍 Thanks for watching and hope the series helped you too. 👍👍

You’re welcome, and not alone in your pursuit! If you want a good laugh, read through the previous comments 😂👍

😂👍 Welcome to the club! I never dreamed that this video would be my most viewed….. I spent a full year on building The Black Pearl ship and it is no where close to the success of The Tommy Chair…. If you want a good laugh, read through other comments from the past.😂😂😂. Glad to have you aboard 🏴‍☠️.

You’re welcome! I truly appreciate your generosity in the SUPER THANKS payment. Actually the beach chair video is my most watched ! It took all of 30 minutes to produce. I spend untold hours building wooden model ships and producing related videos…… none produce much revenue 😂. I will put yours $ to good use, as my KZbin cash goes towards equipment and ships to build in the future. Thanks for taking your time to give me some positive feedback as well.

Perfect weather for ice! At least where I am! Thanks for watching. I think you’re gonna love the machine 👍👍

Maybe because you might have a different version of raft. It’s simple to measure yourself. My purpose was to provide a concept and to document my adventure. Now it’s your turn to create your own story. Enjoy your journey.👍 Thanks for watching 👍👍

Water 💧 would ruin it.

Thanks for contributing to my list of humorous stories from viewers…. Maybe someday compose all of them in a book 😂😂👍

You’re welcome.👍👍

Yep, all great information for anyone considering one! Thanks for watching and sharing your experience 👍👍

I’m finally back on track, so hopefully I’ll show more progress…….in a more timely manner. 👍

You’re off to a good start!

I’ll put on my list of to do in the future! The copper usually comes out very nice when put in the covered container. Just with this metal it just didn’t work… I’m totally puzzled, but will keep working on it!

I’ve since traded that Forester in for another Forester. I do recall that if the turn signal is on for a long period of time, it did start to hyperflash. They are also extremely bright and my wife convinced me to not install them in my current Forester because when you open the tailgate at night they flash twice and it’s painful on the eyes…. Yes, they are that bright! Definitely gets the attention of drivers behind you on the interstate, day or night. Thanks for watching, hope it’s been informative.👍👍

@@BoilerDan1 there’s better options u can get for less bright. Try Auxito amber led 54H. 5.5W. Not as bright as with a built in resistor with 24W. But still brighter than stock. And it’s more refined super bright.

@toyotabrony Thanks for the info. I’ll check it out….. maybe on my next one. I’ve been driving about 30,000 miles a year and like to trade in at the 80,000 - 90,000 mile range. But I will look them up and maybe put on my Christmas list 😎👍👍

@toyotabrony I looked them up, but said that they won’t fit the 2023 Forester model 😞

@@BoilerDan1 they always said that. Just because it says on the info, doesn’t mean it’s true. Check ur incandescent bulb to see what bulb size u have. If it’s a 7440. It’s a 7440. If it’s 3157 it’s a 3157. Those 54H led amber I mention needs either load equalizer resistor or led flasher relay. Or if u want a plug and play version load equalizer resistor. Look up alla lighting - resistor plug and play version.

Great, it’s not difficult on that model year. I’ve since traded it in and currently have the 2023 model Forester. Very happy with all of them (4 so far 😎). Thanks for watching and taking the time to comment.

You’re welcome….. We were just on the beach at Hilton Head and I was wondering if anyone there was watching 😂😂. I should put a link to the Super Thanks on this video I’d rake in $$$ 😂😂😂 This is my most popular video of all 🫨😂. Thank for taking the time to comment. My family enjoys hearing them. For a good laugh, read a few of them…. You were not alone 👍👍

Very handy for my small woodworking projects. Very happy with it. Thanks for watching and adding in your support 👍👍

Glad you figured that simple and inexpensive fix. Maybe your comment will help someone else out too! Thanks for watching and sharing your experience.👍😂

You’re welcome 😂👍

😂….You need to read the past comments! It’s also my most popular video 🤪😂👍. Thanks for watching 😂

No, it doesn’t have any vin numbers. I’m not sure about your state but here in Indiana the boat is registered, not the motor. You can go through a process to have a vin number assigned, similar to if you built your own trailer (or motor). You’ll have to get forms from your BMV. May not be worth the hassle though….

@@BoilerDan1 Thank you for the info, I live in Texas and we have to register all outboard motors except electric ones.

@CobblestoneYT That might be tricky….. I’d go to the Texas BMV and see how you can get it done before I’d buy one.👍👍

Thanks, I’m no airbrush expert, but for my needs this has worked out well for me! I need more experience in keeping it clean as the nozzle needs to be clean for best results. That being said, I’ve had no major issues and enjoy using it. Mostly just shadows on my wooden model ships, but I’ve used it to paint the inner hull on 2 skiff boat with great results. Thanks for watching and taking the time to comment.👍👍