Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@taylorfortenberry9998 2 күн бұрын
I just got this for my 3yo and wanted to put it up for Christmas. Thank you so much for walking through the instructions!!
@MADEbyAP 2 күн бұрын
You’re welcome! They’re going to love it!
@JohnThePGHAndPSUFanatic 5 күн бұрын
Where did you get them????
@MADEbyAP 5 күн бұрын
All the links are in the description! Enjoy.
@danielledecaprio3664 5 күн бұрын
How do you switch from one programmed setting to another? There are up to 7 different settings.
@floppypancake2439 7 күн бұрын
That’s pretty smart of Roomba to make it to where you can easily replace these parts. I’m not even gonna bother taking it apart trying to clean and trouble shoot. Just bought this part. Thank you
@Tatsumaki7 8 күн бұрын
How long does the talentcell last? There is a larger version. Is that overkill?
@MADEbyAP 8 күн бұрын
Hi! I have yet to have the talentcell die on me at a con. I ran my Robotman helmet for a good 8 hours with it, Vader for a good 3 hours and so far with my proton pack maybe an hour and a half. No issues. I’ve yet to deplete it while in costume so from my POV it’s working fine!
@JamesBoz 9 күн бұрын
Thank you! Just changed my 2017 MacBook Air. Was easier than I thought it'd be.
@MADEbyAP 8 күн бұрын
Woo!!
@RaymondvanGelderen 13 күн бұрын
We 70s kids are all trapped ladies. 😅
@RaymondvanGelderen 13 күн бұрын
Studio scale or no scale lol.
@MADEbyAP 13 күн бұрын
Large scale? Way big scale?
@RaymondvanGelderen 12 күн бұрын
The real estate says no haha.
@danlower7834 13 күн бұрын
Great video overall. Having just done this on my end I would recommend a few things to anyone trying it: 1. When pulling the float out, put something under it so the wiring doesn't fall into the hole! The harness is short so be prepared 2. Manufacturer site for my dishwasher says these are half-inch socket screws, but mine were actually one-quarter inch. 3. There is more water in this area than i thought! Be careful in soaking it all up before removing the part.
@MADEbyAP 8 күн бұрын
Great tips. Thank you!!!
@markegan2480 14 күн бұрын
A real comedian, hardy har har
@bossbeat608 15 күн бұрын
Sir after i replaced my macbook battery my some keys are not working please help me😢
@FreddieCuellar-p2l 16 күн бұрын
My dear sir, you are a true artist!!!!!!!
@beingatliberty 16 күн бұрын
My dishwasher has an inflow heater element, which I believe is attached to a metal pipe below the waterline which remains in the bottom at all times. as such I don’t think my dishwasher has a float switch, although it also isn’t heating, I did an ohms test, and the heating register 26 to 32 ohms which should mean it’s okay? So need I need to check other causes.
@kevingoodrich5472 21 күн бұрын
The float switch lets the unit know if there is water in the unit an its ok to heat the water. My guess at least. Thanks for the video
@kylevasquez929 22 күн бұрын
Is there a way to add a thumb lock to these? Or do you just leave the key inside?
@DIYMechanic57 22 күн бұрын
Thanks for this video. I almost assumed it was the heater element and was going to order it. You saved me $40 on the heater element and the frustration of waiting on the part, just to find out it wasn't faulty. Looks like it's my float that went bad. Great video.
@chiefs529 23 күн бұрын
Is the hard drive removable? Need to transfer data to another computer.
@eldavillarroel235 26 күн бұрын
Very helpful. The steps are so specific and clear. Thanks a lot for your video.
@NewEnglandScene 27 күн бұрын
Very helpful video ...except there is a 5th screw right in my 2017 MacBook Air in the middle of the battery, in addition to the 4 you show in your video. I was tugging and pulling and bending, trying to figure out why the battery would not just pop out as it did in your video. Then, I looked carefully, there is a 5th screw holding the battery in place just below the notch in the middle. No damage done to the computer, but I probably didn't help the old battery I took out, which doesn't matter anyway. The changeout was a success. New life to an old laptop.
@asyraf_fareed 28 күн бұрын
Mine cpu is throttling. Battery is 0%. If i change the battery, will it not thottle once changed? Model is Macbook air 2017 13 inch A1466
@Bruehoyt Ай бұрын
It does not literally just pop up once you get the screws out. That’s the whole reason I came to this video. I know there are clips on the left and the right. It seems they’re buckles in the back as well. You just skipped over all of it.
@MADEbyAP Ай бұрын
False sir. There are no clips. Are you sure you have the same Air as in the video? Possibly an older model instead?
@Bruehoyt Ай бұрын
@@MADEbyAP perhaps. I was able to get mine off. it has a clip on each side that needs pried up. in the back it need slid forward.
@urielwiliiams3411 Ай бұрын
Thanks you explained it so simple and in such a short time, therefore, it was complicated.
@tonysilva7458 Ай бұрын
Thank you for this video. I’ll be grabbing a few light sets from Game Of Bricks. The sound and flashing takes it to the next level as you say!!
@MADEbyAP Ай бұрын
Awesome! It was a lot of fun to make (and listen to haha)
@Wintermn Ай бұрын
Really appreciate a) your appreciation for BTTF but also b) thanks for your time to help with the lighting kit, I got really stuck on this and you really helped dude ! Appreciated 👍
@MADEbyAP Ай бұрын
Oh glad it helped!!
@Anjin-qg3ie Ай бұрын
It absolutely does have a system in place for a frame. I'll make a video and show everyone.
@MADEbyAP Ай бұрын
Nice. Can’t wait to see it!
@Anjin-qg3ie 28 күн бұрын
@MADEbyAP kzbin.infoHp6bqtaOX90?si=ifESKLktVP65N-Yc
@jackjanpour8532 Ай бұрын
What you want to say is: Battery Management Software needs to collect new statistic data about your new battery. To do that, charge and discharge new battery 5-6 times. After that Battery Management Software knows enough about your battery to work correctly. Good video. Thank you.
@MADEbyAP Ай бұрын
Ah thanks for that!
@GoldenPeach-z5b Ай бұрын
everybody stopped at heat element in their videos. Yours was the only one to point to other potential issues.
@MADEbyAP Ай бұрын
Thanks! Yeah figured I’d try and point out a few different things!
@nelson-l8g Ай бұрын
where are the files for the parts
@MADEbyAP Ай бұрын
Here you go: www.patreon.com/mrbaddeley?
@nelson-l8g Ай бұрын
love the work
@MADEbyAP Ай бұрын
Thank you!!
@bobbyhook6382 Ай бұрын
You were right on the money ...float switch only 16.99....easy to put it in and dishwasher is back to new ... didn't even have to remove dishwasher from under the counter
@MADEbyAP Ай бұрын
Niiiice!!
@mariov7123 Ай бұрын
How do you extend your plug outlet?
@MADEbyAP Ай бұрын
I ended up getting a cord extender off Amazon. Works great since I only needed a few inches. amzn.to/3OfH0fq
@KenS-t7d Ай бұрын
Before putting them in the IPA bath, soak them in some really hot water for about 10 minutes then watch the supports fall off without much force... give them a light sand then wash in IPA followed by curing.
@MADEbyAP Ай бұрын
Oooh I’ll give that a try. Thank you!!
@MochaQueen5 Ай бұрын
Very helpful, thank you!
@MADEbyAP Ай бұрын
You're welcome!
@timothydevine1768 Ай бұрын
Super Easy to do. Almost laughable. Thanks for your help in resolving this issue.
@MADEbyAP Ай бұрын
Right? You got it. Glad to help!
@dianec6290 Ай бұрын
Great idea. Thank you.
@MADEbyAP Ай бұрын
Thanks!!
@jonaspratt Ай бұрын
YES
@Shooter_FPV Ай бұрын
Great build! I just subscribed last month, got my second big box today. Stupid question: what s that cutting wheel you have for your dremel? I plan on getting the Paragrafix vents, but I could also use that cutting wheel on other projects. I haven't been able to find one that big.
@MADEbyAP Ай бұрын
Thank you!! Here’s what I use for the cutting wheels. They’re great. And I love the quick change setup. Enjoy the build!! amzn.to/3OAoG0Z
@Syamhouse Ай бұрын
Bruce Hornsby.
@alexanderlindquist Ай бұрын
i sold my macbook and imac bought a pc much better
@tomstestkitchen Ай бұрын
I'm making these mods right now, brilliant idea using the magnets to locate the bolts for drilling the holes. Also thanks for the gun track model, I've been looking for one of those for a while.
@MADEbyAP Ай бұрын
Glad it helped!!
@CreativeTiana Ай бұрын
Thank you soooo much! I replaced my 2015 A1466 battery with this. We had taken it to Apple and they would not replace the battery for us due to other issues with the laptop but this video helped me so much, I now have a functioning laptop again! 🙌🏾
@MADEbyAP Ай бұрын
Yes!!! 🙌
@madaboutplaidnw Ай бұрын
Just wanted to say thanks. The reset breaker worked for me.
@MADEbyAP Ай бұрын
Great to hear!
@fringeminority5676 Ай бұрын
There is a thermistor inside the float and its a common failure
@kats7945 2 ай бұрын
So amazing! You are very talented! I'm updating the candy slide I have used for the last several years and would like to try your design. How thick is the EVA foam that you used?
@MADEbyAP Ай бұрын
Hi there for the head I used the 5m for rigidity! Glad you liked it!
@kats7945 Ай бұрын
Thanks so much for the response!! I know this thread is quite old. My updated candy slide is looking great, thanks to your video; just have to figure out how to do the eyes. Hope you have a super fun Halloween.🙂@@MADEbyAP
@tombstone4290 2 ай бұрын
Hey AP! I love the video review and your creativity to create Undertaker spats for my legs. I wore boots before but I take great care of my limbs due to injury of my right leg. Last year I bought black protective covers for my legs and the next day I had a Raw wound which kept me limping for 3 months at work. I needed something to apply pain free on my kegs and this video is the solution to my problems! Fantastic video my friend! I personally cosplay as Undertaker too since Halloween 2022. Its been one of my childhood dreams to cosplay as my favorite childhood wrestler. As a kid I was bullied and name-called because of my injury. I had an accident when I was 11 and I literally spooked kids because I looked up to Undertaker as my hero who I looked up to and this fits perfectly to label me a Deadman myself and I couldn't be happier! I'm gonna try this too just in time for Halloween, man! Thank you anf have a Happy and Safe Halloween 2024!
@MADEbyAP Ай бұрын
Hey there thanks for the comment and I’m glad a fellow undertaker cosplayer found this helpful!! Such a great character to play. Have an awesome Halloween!
@chrisdavy2251 2 ай бұрын
Thanks for the video. Could you add a few shots of the actual use of the tool as a spreader. Preciate ya.
@George-pp2hr 2 ай бұрын
PS I'm in Australia i don't know the Undertaker character. Are you same person I've spoken to who built Star Wars large scale models? I have so many messages and comments acumulated ive lost some people i was in touch with. The boots look as you hope.👍🇭🇲🦘✌️
@MADEbyAP Ай бұрын
Hi George it is the same person! I do models, props, costumes and all other kinds of stuff. I do have a few more Star Wars kits in the queue I just need to do them haha. How are you??
@George-pp2hr Ай бұрын
@@MADEbyAP Nice catching up with you again. I seem to have lost contact as I've been looking until I seen the boots video. I recognised you.😄 Hope to see your Star Wars builds or show. All the best.🙂👍✌️🇭🇲🦘
@George-pp2hr 2 ай бұрын
Hello from George. Im not sure if this is about wrestling boots but you know what you're doing. It works. I wish i could do that for Star Wars boots Biker Scout boots or other.👍🇭🇲🦘✌️
@MADEbyAP Ай бұрын
I’m actually working on a biker scout and agree. The biker scout boots are a pain. This would be so much easier haha.
@George-pp2hr Ай бұрын
@@MADEbyAP Hello. I've actually thinking of using cardboard for Biker Scout boot. At least the tall leg parts. But I know it won't be strong enough unless I can find white vinyl.🤔🙁🙂👍✌️🇭🇲🦘
@George-pp2hr Ай бұрын
@@MADEbyAP I take it you must have a large scale Biker Scout model I seen a unboxing video a while ago. I've been buying bits and pieces but I'm not having any luck with costumes Sand Trooper or Stormtrooper and Biker Scout. I have bought the black series helmets of Stormtrooper, Artillery Stormtrooper ×2 one to repaint as a Sand Trooper, Biker Scout helmet, Boba Fett and PVC made helmets of Tie Fighter, second Tie fighter I didn't order they sent me wrong version from the Inferno Squadron and from the Ashoka series Captain Enoch. Latest purchases E-11 blaster, a Biker Scout hand small Pistol that was a gift from a seller. I'm waiting for a second E-11 blaster Star Wars original version. One did get and didn't know is a Return Of The Jedi Version. Sorry for long message. I wish I could show you my collection but you probably may own some of those maybe. I still don't know how you go about showing on KZbin. Take care.🤫🙂👍✌️🇭🇲🦘 From down under Australia.
@relliott59 2 ай бұрын
Good job, thanks
@MADEbyAP Ай бұрын
Thank you!!
@relliott59 2 ай бұрын
Where d o you get the pipe in the middle, the + let’s say. My hardware stores don’t carry them?
@MADEbyAP Ай бұрын
So sorry! Here you go. amzn.to/48kjibf