ARW

Пікірлер

@FrancisoDoncona 10 күн бұрын

Hey Harold, Merry Christmas! From NC, thinking of you, yes you were are and will be an inspiration, see you soon!

@AmateurRedneckWorkshop 10 күн бұрын

Thanks Franciso.

@OnCNCcom 17 күн бұрын

Hope things look up for you Harold. My status is declining and I have not put out a video in about 2 years. I understand the priorities of channel vs life as I had to change mine. Do check in and keep us posted.

@AmateurRedneckWorkshop 17 күн бұрын

@OnCNCcllm I am sorry to hear that your status is declining. My own status is just static. As long as enough people donate blood I guess I will continue unchanged. I would guess there are millions of donors as their are so many who need them.

@bobomonkey702 26 күн бұрын

I just ordered the CT-520dp. Question I have is can I use a 10 gauge wire or do I need to use 8 gauge. The length is about 70 foot run from breaker box to location. I’ll be mostly using stick welding and plasma cutter. I generally don’t deal with thick gauge metal. Mostly light duty. So if you could please let me know what gauge wire I will need to run for about 70 feet. I’m guessing either 10 gauge or 8 gauge. Thank you very much.

@AmateurRedneckWorkshop 25 күн бұрын

I am not actually qualified to answer this question, but I think the 10 gauge would be enough. Please check with other channels to see if I am right.

@HabiburRahman-e1j6p Ай бұрын

I am a professional digital marketer and SEO expert. I saw your ARW channel, And your channel content is very good. But video views are not good. Your channel has some issues due to which your videos are not getting good views. The main problem is SEO. For which your channel video views are not increasing.

@jaredshoemaker9196 2 ай бұрын

My husqvarna ft900 tiller isn't getting spark. Where is the ignition coil located on a husqvarna ft900 tiller?

@AmateurRedneckWorkshop Ай бұрын

Thanks for watching but the tiller has been gone for a few years now and I do not know the answer. try searching for it on youtube. Try here for one exampls kzbin.info/www/bejne/o4mno62CqbubeKs

@Ryan-xq3kl 2 ай бұрын

Getting the Burris Fastfire III in as my first RDS

@AmateurRedneckWorkshop 2 ай бұрын

I have had good experiences with them. Please pay attention to the size of the red dot that you order. Smaller for more accuracy, larger for fast target acquisition.

@SamuelTalton-n1n 3 ай бұрын

Perez George Taylor James Williams Joseph

@crime380 3 ай бұрын

Thank you for the video

@crime380 3 ай бұрын

How you doing

@AmateurRedneckWorkshop 3 ай бұрын

@@crime380 I am doing great how about yourself?

@TheMiniMachineShop 3 ай бұрын

Keep on going!

@EdwardKilner 3 ай бұрын

Could you tell me how set the X axis. If table moves left from a zero setting, does the DRO indicate increasing negative readings?

@AmateurRedneckWorkshop 3 ай бұрын

Well here is the cat out of the bag. Where ever the table is setting when you press the zero X button then that point is zero X. See Mr. Greebe here. www.practicalmachinist.com/forum/threads/lathe-mill-dro-axis-directions.225890/

@EdwardKilner 3 ай бұрын

@@AmateurRedneckWorkshop I knew that. Now, if you move the table left, do the numbers show a negative sign with numbers increasing? The DRO my friend has can be made to change sign. I would think that is a common feature. My question was really to help clarify a possible solution for the folks who installed the scale correctly.

@AmateurRedneckWorkshop 3 ай бұрын

@@EdwardKilner If they have installed the scale correctly they don't need any solution. Pressing the period key on the keyboard as you turn on the DRO is often the way to get it into setup mode. Then the steps to reverse the X take will be obvious. I do not have a dro manual in front of me just now. You can look in the manual just as good as I can.

@EdwardKilner 3 ай бұрын

@@AmateurRedneckWorkshop Since I am an Electrical Engineer, I am somewhat familiar with manuals. RYFM was an order I heard a lot in my early career. I am a champion and inveterate manual reader. My question was for other reader’s benefit, not for mine. The DRO I have access to belongs to my friend, a mechanical engineer. I found some interesting, to him, gems in the manual and supplementary info publications. We both enjoy helping others. We both strive for clarity. If I failed to be clear, please tell me.

@AmateurRedneckWorkshop 3 ай бұрын

@@EdwardKilner I am sorry I did not mean to be rude. I just have a lot on my mind these days. I do not remember where in the set up that you can reverse the Axis. I did look for it for a few minutes but it has been two years since I made this video and an old man forgets things. In fact for this video I had to reverse the X because when I got the replacement scale from China, I put it on backwards and it was messing up the demonstration.

@wmforester007 3 ай бұрын

Im replacing the switch on mine & don’t remember where the 4 wires plug back into the switch & can’t find a picture of it anywhere on the interweb. Was wondering if you had a pic or if you knew the proper wiring?

@AmateurRedneckWorkshop 3 ай бұрын

Sorryr Forester but i don’t have that information. Try Keith Ruckers website he has lots of manuals there but

@wmforester007 3 ай бұрын

@@AmateurRedneckWorkshop I figured it out. Thank you! Wish they made better belts!!!

@danburch9989 4 ай бұрын

I think most wiper motor gear boxes have plastic gears. They won't have the strength that an all metal gear box would have.

@wintermachine 4 ай бұрын

Harold. Nice Video! You do what makes you happy. This is your life enjoy it to the fullest. Thanks for sharing this idea. Though it was not originally yours, you built it your way, and did a very good job of making a mundane task much simpler, not to mention easier on the fingers. You will be missed. I am going to copy much of your machine, for my use only. Thank you!

@AmateurRedneckWorkshop 4 ай бұрын

Thanks wintermachine.

@AmateurRedneckWorkshop 4 ай бұрын

Thanks for viewing Paul.

@ypaulbrown 4 ай бұрын

thank you so much Harold, cheers from Florida, Paul

@markcrotty5094 4 ай бұрын

Miss you I am glad your health is improving or at least maintaining God Bless

@AmateurRedneckWorkshop 4 ай бұрын

Thanks Mark.

@seldendaniel8819 5 ай бұрын

Good to see you!

@AmateurRedneckWorkshop 5 ай бұрын

Thanks it is good to be here.

@teamstubbs 5 ай бұрын

what are the odds, I used a Harold Sims for all my motorcycle machine work, I own Sugarland Powersports, now I'm doing my own machine work.

@AmateurRedneckWorkshop 5 ай бұрын

I did machine work for Stubbs Suzuki but never for anyone as far off as Sugarland. I did machine work for Bruce Bristal Honda and a few others that I no longer remember.

@Xynudu 6 ай бұрын

Hi Harold. Sorry to hear your health isn't great. Hopefully things will continue to pick up. I've been to emergency ward a few times lately, but that's just part of getting old. Just waking up each day is a big plus ;). All the best from down under. Mega lathe. Cheers Rob

@AmateurRedneckWorkshop 6 ай бұрын

Thanks Rob.

@Rahuls16 6 ай бұрын

This test is what I was looking.in my test 60 kg pulled using 12 v wiper motor

@douglasbattjes3991 6 ай бұрын

Harold, So enjoy your videos, I have a Ditron 2 axes DRO had it on my lathe, took it off to move the lathe, now the X and Y axes are both moving at the same time, example, if you run the feed on the X axes, the Y or cross feed also reads the same numbers, can't figure out how or what happen and need to get the cross feed to read it's cross movement, Any ideas, keep all your videos coming.👍👍👍👍

@AmateurRedneckWorkshop 6 ай бұрын

I have not heard of that happening. You would be best off to ask Ditron. Just a suggestion do you have more than two connection to the scales? Maybe you have hooked the cables to the wrong ones.

@douglasbattjes3991 6 ай бұрын

@@AmateurRedneckWorkshop Not Harold, think I may have fixed it by resetting to factory settings. But not a lot of help I can find from Ditron,

@douglasbattjes3991 6 ай бұрын

And only have the two connections, Have to locate my manual and set it up again , but you know the manuals are little suspect with info and someone from China wrote it for sure

@RustyInventions-wz6ir 6 ай бұрын

Very interesting. Nice explanation. Thanks. It’s very helpful.

@AmateurRedneckWorkshop 6 ай бұрын

Glad to be of help.

@tazo1jd 6 ай бұрын

i need a new motor . were can i buy one at?

@macdoctor562 6 ай бұрын

You're supposed to be hooked up to the positive, not the negative. No wonder you can't get it to cut correctly.

@AmateurRedneckWorkshop 6 ай бұрын

Yes you are correct. Sorry but this is my first time trying to use this ty0e of tool.

@macdoctor562 6 ай бұрын

Like a monkey screwing a football, lol.

@RustyInventions-wz6ir 6 ай бұрын

Thank you so much. I just installed a DRO on my lathe and have no idea how to use it. This explains allot.

@Tuffdaddy1958 7 ай бұрын

Good review thanks👍

@AmateurRedneckWorkshop 7 ай бұрын

There is no reason to doubt them.

@AmateurRedneckWorkshop 7 ай бұрын

Give it a try it could work great.

@michaelpriest6242 7 ай бұрын

I'm interested in the HP carbine and have had a HP .45 pistol for a dozen years. I thank you for the comparison. I hope my Bullseye handloads work well.

@dracoorian3029 7 ай бұрын

Will that work on my rifle as well I put a bipod on mine and the bipod scratched the barrel and it’s a brand new gun I bought so the damage was done by the bipod