Purchased Nov. 2023. Machine is not working, just continues to make a clicking noise. Cannot find warranty information, customer service information or trouble shooting guide.
@Kalbo64Күн бұрын
Hi, I can only suggest contacting the retailer. I have no connection with the company what so ever. Hope they can sort it out.
@Kalbo642 күн бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@Kalbo644 күн бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@bubbaliveyodo40844 күн бұрын
Whats the app?
@Kalbo644 күн бұрын
Hi, sorry I don't recall, and no longer have the camera. It worked well for several years until I lost it.
@LeonardoSummers5 күн бұрын
Did you cook a whole chicken in 20mins?
@Kalbo645 күн бұрын
Hi, yes although it was a small chicken, and cut in half which reduces cooking time.
@jankoenigsfeld82976 күн бұрын
Can you tell me how to get my fitpolo to run. I have it paired and connect to Bluetooth
@Kalbo646 күн бұрын
Hi, I can only really refer you to the manual covering the functions and setup. I have no connection what so ever to the company that sells of produces fitpolo.
@Kalbo648 күн бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@jankoenigsfeld82979 күн бұрын
For some reason I can't get into the program to show results and it comes up saying Bluetooth function and device needs to connect. Where is this
@Kalbo648 күн бұрын
Hi, you need to connect it to your phone via Bluetooth. It is covered in the manual.
@jankoenigsfeld82978 күн бұрын
I did but something Bluetooth function and near by device. What does this mean? I am connected to Bluetooth
@Olliebobalong10 күн бұрын
That power head sounds very underpowered. Don’t have that issue at all with my V15
@charlesmckenna71210 күн бұрын
It's amazing what you can do and the engineering that went into that fantastic
@Kalbo6410 күн бұрын
I agree, very clever and imaginative models
@Kalbo6410 күн бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@Jacob_Moore10 күн бұрын
Can you 3d print lumina from destiny
@Kalbo6410 күн бұрын
Hi, it is not one I have printed, but it can be printed.
@robertjohnburton977511 күн бұрын
Look good, what time did it take thanks.
@Kalbo6411 күн бұрын
Thank you :D It takes around 12 hours on my Ender 5 s1
@robertjohnburton977511 күн бұрын
@@Kalbo64 Cheers from Australia, thanks.
@Kalbo6412 күн бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@statuspoint565612 күн бұрын
Ender 3 Max Neo or CR 10 Smart which is better...
@Kalbo6412 күн бұрын
Hi, I haven't used the CR 10 Smart so can't really say. It would also depend on your needs and what you are looking to print. Personally the next printer I am looking at getting is the K1 Max.
@statuspoint565612 күн бұрын
@@Kalbo64 Ok.. Thank you 👍🏻
@robingibbons519715 күн бұрын
Thanks very much! This is not mentioned in the instruction book. Cheers Rob
@Kalbo6415 күн бұрын
No problem :)
@konefunecycle15 күн бұрын
Hi Chris... I just bought this Euki electric air duster and test the battery to see if 4hrs at the speed 1 (60000rpm) is true. So after I received my unit, I completely charged the blower at 100%, turn on and select the low speed. After 1h43 minutes, the Euki air blower shut down, batteries down. So, now, I'm wondering if my brand new unit is defective or maybe it's a misleading information by the company. Can you do this test with your device and let me know. Thank you for your video and your time...
@Kalbo6415 күн бұрын
Hi, I will put mine to the test, and reply again when I have the results.....
@JudiP-zi4fv15 күн бұрын
I'm always sceptical with these devices, anything that involves fast moving parts.. I'm worried about buying this and it breaking within a year..
@Kalbo6415 күн бұрын
@@JudiP-zi4fv Hi, it does come with a 12 month warrantee, but I guess that is the case with anything from a Vacuum to a desktop PC.
@robingibbons519715 күн бұрын
Hi, good video! What does the air pump do? Cheers Rob
@Kalbo6415 күн бұрын
Hi and thank you. It is for first use or if the machine hasn't been used for a long time. It is for priming the water through the system by removing the water tank, and using the pump to push water through the system.
@keithfarrell250316 күн бұрын
I just got mine yesterday, and already having issues with opening the locking lever on top,damn thing keeps getting stuck, even with a little force it won't open, I really can't see what I'm doing wrong, anyone else having problems with this?
@Kalbo6416 күн бұрын
Hi, I have seen a few people saying they have this issue, but have not seen any solution. Personally I have not experienced this, and mainly use nespresso pods. The lever does take a fair bit of pressure to close and release, I presume by design in having to puncher the pods. I can only really suggest contacting the supplier.
@adamellistutorials16 күн бұрын
They told me you don’t need a soft box for these lights as a key light. Surely that’s not right?
@Kalbo6416 күн бұрын
Hi, sorry I am not experienced enough in lighting to give a confident reply, hopefully someone else will be.
@olafperko17 күн бұрын
Next time hold/tape fans so you dont risk breaking em
@Kalbo6418 күн бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@I.Love.MartyMcfly18 күн бұрын
I have this exact printer and it prints like a dream but I can’t for the life of me figure out how to print when you have just ONE label left. I just can’t figure out how to load just one label. It seems as though the printer isn’t capable of this? It has to be at least two labels connected in order to print. Is there a way to trick this thing into loading and printing from just one single label not attached to a whole accordion of labels?
@gdude739718 күн бұрын
So you just randomly selected which pads to use?
@homosapien736119 күн бұрын
Hello, wonder is it quiet while running
@Kalbo6419 күн бұрын
Hi, it is fairly noisy when the blending is taking place in short bursts.
@homosapien736119 күн бұрын
@@Kalbo64 thank you for replying! Have a nice day
@moriahking21 күн бұрын
Can I print on fabric 🎀 ribbon with this
@Kalbo6420 күн бұрын
Hi, I don't believe you can.
@steveashforth509721 күн бұрын
Hi. I recently 'found' your Cats Vase on Prusa Printables & am coming to the end of its 1 day+ printing time. I like the fact that the surface of the moneybox has a texture to it. I think it makes it more 'tactile'. I have a question: Would it be viable to move the slot to the back of the cat's head? It would allow a lot more money to be held in the box. Thanks for your great designs.
@Kalbo6421 күн бұрын
Hi, thank you for the kind comments :D I did consider putting the slot at the back top of the cats head, but I was concerned the coins might get trapped in the neck, so put it on the back.
@steveashforth509721 күн бұрын
@@Kalbo64 Ahh, now that's something I didn't think about, lol! It's a logical decision when one thinks about it. As I type, the vase is almost done. Just 20 minutes to go. I printed it at 0.01 layer height & the detail is absolutely fantastic. The moneybox will be next.
@Kalbo6421 күн бұрын
Hope the vase turns out well, and thank you for the interest and kind comments.
@steveashforth509720 күн бұрын
@@Kalbo64 The vase turned out extremely well. Not one 'glitch' in the print at all. Thanks for making such a great design available.
@Kalbo6420 күн бұрын
@@steveashforth5097 You are welcome, and I'm glad it turned out well :D
@saurabhagarwal738621 күн бұрын
What about battery life..?
@Kalbo6421 күн бұрын
Hi, it does depend on the mode you are in, but on the highest power between 15-20 minutes run time.
@anushav335921 күн бұрын
.
@rodrigogomes946021 күн бұрын
beautiful work, thanks for sharing
@Kalbo6421 күн бұрын
Thank you for the kind words, you are welcome.
@Kalbo6422 күн бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@spaghettirus122922 күн бұрын
Hi Chris, how much did this cost?
@Kalbo6420 күн бұрын
Hi, I think you can get it for around £85 now.
@denistolic285723 күн бұрын
Do you have link for the 3d model ?
@Kalbo6423 күн бұрын
Hi, this is the model I used - www.thingiverse.com/thing:747305
@philriley232823 күн бұрын
Have just purchased one for my mum, the battery doesn't seem to fit snugly into the charger port, making poor contact. It will charge, but only when you put slt pressure on it, which cant be right. The manual is a bit vague. Any help grateful, before I return it.
@Kalbo6423 күн бұрын
Hi, sorry it isn't an issue I have had, it sounds faulty, so personally I would return for refund or replacement.
@shannonsmith817224 күн бұрын
Does it work good offline?
@Kalbo6424 күн бұрын
Hi, offline you can choose from Spanish, English, Chinese, Japanese, French, German, Arabic, Russian, Korean, and Thai. Any other languages you will need a online connection.
@Ragemazter25 күн бұрын
Why isn’t it charging
@Kalbo6425 күн бұрын
Hi, sorry I have no idea. Mine is still working fine and charges. I would suggest contacting the retailer if it's still under warrantee.
@Ragemazter25 күн бұрын
idk I got it yesterday it worked for a hour then the battery went off I charged it for 6 hour with a USB C after I turn it on it works for a minute or 2 then says “battery low”
@Kalbo6425 күн бұрын
@@Ragemazter Just to check the obvious. Make sure you are plugging the charging lead into the mini USB port on the speaker (the USB type A is for output charging). The charging light should come on RED when the lead is powering, and go GREEN when fully charged. If none of this is an issue I would return to the retailer.
@Ragemazter24 күн бұрын
@@Kalbo64I don’t rlly get it I plugged it to the port C and it’s flashing red
@Kalbo6424 күн бұрын
@@Ragemazter I would return it then, if it isn't holding a charge.
@Kalbo6427 күн бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@Kalbo6428 күн бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@sumy_3d_druk28 күн бұрын
Як відділили від підложки (друкованого першого шару)? Дякую!
@Kalbo6428 күн бұрын
Привіт, він легко знімає шар плоту
@Mus3467929 күн бұрын
How do you add mix ins, like chocolate chips or Oreos? Do you add them when you add the other ingredients or do you add them in the middle? And if so, how? I don’t see a way to open the lid while the ice cream is mixing??
@Kalbo6429 күн бұрын
Hi, I tend to mix them in after it is complete. You can just open the lid and the machine will stop, and resume the process once you replace it.
@Mus3467929 күн бұрын
@@Kalbo64Thanks. I think I might try adding them in halfway through by pressing the pause button and taking the lid and mixer off, adding them in and pressing start again.
@SoumyaRanjanPatro-bi2cv29 күн бұрын
How is it going any problems in this air fryer I'm considering buying this one
@Kalbo6429 күн бұрын
Hi, it is still working fine. There aren't really any problems, although I do feel you are paying more for the Masterchef brand on a standard Air fryer.
@coziii.182929 күн бұрын
Looks a bit weak lol I just got one Yes it vibrates I’m an American and it doesn’t fit any of our cups had to order smaller ones . I got one cause I just got back from Italy 🇮🇹 and love the espresso but I still want my big cups . lol But I got it as well cause I can try different pods etc. American coffee taste like water to me now .
@Kalbo6429 күн бұрын
Hi, I agree it does need a smaller cup which isn't really made clear. Personally always drink black coffee, and for me it's ideal.
@gerardoenamorado-sk1fuАй бұрын
what vidoe files did u use?
@Kalbo64Ай бұрын
Hi, I believe it uses AVI format.
@lolakan732Ай бұрын
Love it!
@Kalbo64Ай бұрын
Thank you :D
@Kalbo64Ай бұрын
If you have any questions please feel free to ask them in the comments and I will do my best to answer.
@meriin1409Ай бұрын
sick bro
@shafshaf9713Ай бұрын
Is this multi colour printer?
@Kalbo64Ай бұрын
Hi, not I printed on an Ender 5 plus. Some is painted and some inserts.
@Kalbo64Ай бұрын
My full review is HERE - kzbin.info/www/bejne/aJ6Xg4KwZbGenM0