Thanks. Very clear. Subscribed😊

Bellissimo video complimenti, i terminali hanno una canna forata dritta? Sono diretti? Grazie per le info

I'm confused about the use of canbus adapter, I'm planned to get a headunit that can know when door is open, where do i find the cable from the vehicle to be connected to the canbus adapter?

I got a old Deadmau5 XL after like 4 years the armrests went to crap old version! SL took care of me and got me new arm setups for like $60. Looking for a new one or a AutoFull M6.

I got a stereo from ebay looks the exact same for 180 dollara

I can’t speak highly of this chair. My lower back never felt worse than in this chair. The bolsters dig into the back and the lumbar support is a joke. Seat cushion is god awful, like a brick.

Thank you! I feel so proud of changing this myself and I could not have done it without your great instructions and helpful video. Everything from the close-ups and your clear descriptions about where, exactly, to put the key to pry the cover off, how much force to use there as well as with getting the batter out to how to close it back up made me feel confident that I could do it myself. Your calm voice and no distracting music helped too. :j

Avoid this chair like the plague. Mine squeaks and moves when locked and the rollerblade casters destroyed themselves with10 months. The support just doesn't want to try fixing or replacing anything. No refunds and no replacements so the warranty means nothing.

thank you for making a not crappy video and saving me $30

Hey, I'm still trying to find a new studio chair and this one is on the list. How is the arm rest movement to et them out of the way of an instrument?

Hey Ben, where did you buy the unit from?

thank uuu king

Thank you so Much😊

Good to know it holds up as well as it does, but I just do not find these chairs comfortable at all. I don't like how flat the seat and backrest are, and how there's very little customization to make it fit you. This is accentuated by the seat and headrest being one giant piece and not being able to customize how the headrest supports you, other than the pillow they give you. I suggest watching the KZbin channel that rates all the chairs, and getting an actual office chair designed to promote good posture and provide healthy comfort.

Really enjoying the KZbin algorithm with this. 1st saw your channel looking for STI reviews. Bought the STI then found you again for a head unit review. Was shopping for a secretlab chair with the recent black Friday deals and found your review. Bought the chair, yet to arrive, and am now enjoying some buyers reassurance. Side note, do you still rate the iDoing head unit?

Hey all I hope you find this updated review helpful on both my Secretlab Titan & Titan Evo chairs. My previous videos (linked in description/on channel) are still relevant also! I'd say this is my last video-update on these chairs, but feel free to drop a question below and I'll do my best to answer it! Happy to help if I can 😃

lol i was just binge watching all of your reviews on this chair.. i think i will make the purchase for cyber monday! thanks!

awesome video mate!

Hi friend, amazing job on the video, very detailed process! I wanted to ask, you mentioned using the reverse camera but I was wondering if you connected the oem reverse camera or did you connect another one? I'm currently trying to use the oem reverse camera but I can't find the yellow plug to connect to the yellow cable they sent

I recently ordered mine, I was debating between the 7862 processor or the qualcomm, apparently the qualcomm having issues, even the tradoff with the 7862 would be slightly lossing resolution for performance, I'd like to see how true that is

"Canna Fanna" Love it. That's gonna be my new Unit of measure.

Thank you so much for making this video! It did help me!

Great video, simple, accurate and straightforward. Thorough, step by step directions that cover most of the important points. Only thing missing is what to do if the silver plunger and spring come out, but it is straight forward to reinstall once you figure out the orientation. Saved about $25 over the dealership and didn’t have to drive 100 miles to get it done. Kudos!

Brilliant, easy to follow tutorial and brief!!. Thanks so much.

Thank you for this. You shave me 50 bucks at the dealership!!!

Thank you, your video helps me a lot.

I have two fobs, one I can get the key out of and one I cannot. Any tips on how to get the key out of the one that is stuck?

why the h would anyone buy a simple battery from Amazon?!? Every local grocer, pharmacy, dollar store etc has it. Stop with the Bezos business!

Thanks! This was super helpful! 🎉😊

Changing the microphone does nothing at all. I have a high end microphone and it still sounds garbage.

When I had my first car that my dad sold me when I was 18 I was the only one with a 297 WHP 1998 Saturn SL2 it was a total sleeper and a monster. But before it became the quarter Mile sleeper I built it to be over time one paycheck at a time, I had a K&N high flow replacement panel air filter in the stock air box but since I was just starting out with it I couldn't afford a cold air intake so my dad suggested that I drill holes thru the bottom of the stock air intake filter box to make it loud and also increase air flow which it did that was one of my first little homemade mods to make the car "sound cool" lmao. Eventually as I saved my pennies I slowly modded it one thing at a time starting with basic bolt ons like a real cold air I intake, big bore throttle body, headers, custom glass pack exhaust with a cable operated dump pipe just before the cat then it was onto top end mods like performance head and hot street cams and Eventually me and my pals pulled the block and built the entire bottom end bored and stroked with all forged internals for a final compression ratio of 10.9:1. I was 18 so I blew every dime I earned to soup up that car and I loved it cuz nobody expected to get burned by a saturn and it was before saturn came out with the redlines and I would be ridiculed by all the Honda guys. But I shut up their shit talking when I smoked their turbo Honda SIs with my fully built all motor saturn shooting flames from the dump pipe under the car. I got taunted for racing out that car but I saw it's potential and I like to have a car that is something unique. And it all started with drilling holes in the bottom of the air filter housing to make it sound cool when I picked up my friends man I felt so cool like I was driving a loud muscle car lol

my metal spring popped out just popped it back in haha, super easy. definitely a bit concerning considering the force needed to apply and remove battery, wanted to check the 'proper' way so I don't break anything. worked!

Dude, can I buy you a coffee? You saved me $30 bucks!

Now this is the way how-to videos are to be done. No annoying music, straightforward, clear description. Great video close-ups. Well done, Ben. I appreciate you doing this! Changed the battery in both fobs in about 2 minutes.

Is the fob still still usable without the little silver locking part for the physical key?

On my 2018 Fob there is no slot to insert the key next to the silver square to pop open the case.

Subaru has got to do better with the FOB.

Thanks

Thanks so much, super easy to follow

Thank you!!!!

Hey Ben thanks for your video, just a question, any of the optional accessories that appear when you select the 2k version on the idoing website, are any of those needed?

Excellent video. I had no problems at all, for a 2022 Levorg, but will add to be gentle.

Harris Donald Taylor Jessica Miller Patricia

hi...great guide! I don't understand why the OEM USBs don't work...isn't it enough to connect them to the system? why did you have to buy a separate cable? I have the usb oem as your car...

Does anyone know of the slim version Would his be compatible with a US spec wrx ?

Thank you

Thank you for the clear instructions! I did this once a year or two ago, but I couldn't remember how I'd done it.

2020 Wrangler 295/70/17 no issues. No lift. Hoping my spare fits in the mount though with out upgrades 😂

I doing is just a rebranded. You pay $300 for customer support. If you have the money maybe its worth it but dont feel like your supprting the company that created it. I just bought the same thing on Amazon for 150 and its super awesome!

Great video man, really appreciate all the thought that went into the different aspects of the chair (and how it compares to the old one) Good on ya!