14:54 “Magic piece of thing that does all the clever stuff.” I laughed out loud at this! Seriously, though, that acrylic manifold is a work of art.

Just repaired my CT55JW microwave. The control board *does* have a mylar sheet in mine so damage limited to one board. It had a nice black burn mark on it. The broken pcb track was easy to spot. Bridged it with some wire and solder. Oven works fine and the bulb/turntable are working again. Swapped bulb for LED so will hopefully not have this issue again. Thanks for the inspiration. Saved me £250.

Next video coming soon? :)

"aesthetic wankery" SUBSCRIBED.

Hello, I have the same model. When power on only the lights power and temp stay on red , help . Thank you

Anyone got a link now the site is dead? Looks like they merged with another company so the link fails.

This reminds me of why I usually loathe working with industrial designers, especially the ones on the artsy end of the skill spectrum. Grumble, grumble.

This has happened to my Panasonic NN-CT55JW. Bulb has blown but now the turntable doesn't work at all. So to save 5p I've now lost a £250 appliance which they deliberately make impossible to repair. Thanks Panasonic. Why are they still even using 1930s bulb technology in the 21st century?

Hi Mike, Thanks for your video review of Tongou RCBO. I'm looking for a WiFi RCBO for my home because sometimes (when it rains and thunder) my home RCCB trips and I have to switch it on manually. It is ok when I am at home but when nobody is at home, no power at home until we come back and switch it on manually. That is my main requirement. Do you have any recommended brand of RCBO which can be controlled by a app remotely? Or you are telling that any WiFi controlled RCBOs are useless and not safe for a circuit?

You get that speckle reduction in laser cinema projectors (with vastly higher powered lasers). It works by changing the path lengths by altering the number of bounces it takes to get around the coils.

Not all people like Americans and Brits are stupid, this has a lot of applications I'm using smart brakes in my pool main switchboard, pumps, heating,g, and lighting and so far I haven't had any problems with it. Regarding safety, I didn't have any problems with it. Es electricians, I find your video is a little bit messaging.

Hi Mike...let's say you were doing some engraving and power go out can it resume where it was cause I have tried to find something and I didn't find anything concerning that

The same technic usees in small led flashy

My guess is its powerd by wirless tech or blutooth IC or small writst watch IC

This video is now referenced by AllPCB's website on a page titled Mouse Bites PCB - Breakaway Tabs - V Groove PCB

Whats your opinion about the Opgen Unyvero ?

„aesthetic wankery“ 😏 Oh well, in medtech there is nearly no limit to the cost of the outer surfaces, especially if they have to comply with GLP regulations. I‘m slightly surprised at the uneven surface outside as it doesn’t seem to be beneficial for cleaning. Have yet to watch the whole series but I assume they‘re using the massive case to keep the inner temperature within a defined range compared to the temps in the lab it would be installed in. 400k is not a surprising price to me at all, yes that outer finish is for the fuzzy feeling in this case. The microfluid consumables are single use and they will be the main cash cow next to the sensor. Fascinating stuff, don‘t get to see this every day.

ООО! Вери гуд найз!

it's a wonder the thing worked at all with all the fiddling you did with it prior to attempting to weld anything. it would also help if you knew how to weld. i would also hope that anyone buying one of these understood beforehand that these are not designed to be used to fabricate container ships or oil/gas pipelines.

The Curie Effect will kick-in on the transformer as it approaches the 'Curie' point of the magnetic material ... it will just start to act like it was 'air' and not a transformer (sort of).

Hope you got it back together

Mike thanks for the video,I replaced my PEB today and just changed the main board with the vin lock on it and worked a treat…thanks

23:17 The gate drivers, where can someone find those? I have been looking for these everywhere. Any links?

Thanks for the help. Didn't have time to watch the whole thing. Needed to open one to recover my reservoir and this helped.

Can somebody give me the right Hz for levitate groundwater , please?

Ah yours was a silicon intensified target tube, the one i had was a simple intensifier amplified vidicon. It was for a microscope camera originally.

I had one of these years ago and was able to free the intensifier from it by very carefully heating the front glass plate. It was bonded to the IIT subassembly fiber optic array with what appeared to be epoxy. The IIT unit lived in a home made X ray imager for a long time ❤

Does the Q-Switch use the Kerr Effect or what.

I don't know this got into the hands of the general public as this is classified technology, just hope that our RAF pilots are OK.

I can't disagree with most of these comments, especially the "Apple-level aesthetic wankery". OTOH, If your health-care team (and mine) are relying on machines like this to diagnose what is wrong with you, or to analyze what kind of therapy is most effective to make you better or keep you alive, I am somewhat reassured at the level of insane build-quality and intricate custom manifolds, etc. and automation of what was probably a rather fiddly series of laboratory tests. This illustrates how much mechanical/electrical/chemical/billogical/optical automation is taking over things that literally affect our life, health, and safety. And when A.I. starts reading our medical charts and talking to machines like this, we are handing over the welfare of human society to the machines. Let's try to not interface things like this to "Skynet" (or SKYNET). 😲

Yup the gold was applied using a metal vapor deposition process. Its similar to the aluminum coating process on cheap plastic silverware.❤

Kkk

Where's part 2 🥲

Just found this video in 2024 but still glad you have it up. I've always been interested in old video/audio technology (especially analogue television) so to see how old 35mm surround sound audio finally works is a wonder. Cheers for the video and keep up the good work.

Thanks for sharing. Helps put sone visual to stories my father used to tell. Do recall a story from my dad on likely a similar device that was probably on phantoms. Was running a training shop with westinghouse rep and the rep forgot to follow all the safety precautions and had the front lens off. My dad pointed out the failure to which the said “no its fine there’s safety on this” as then the laser started firing across the classroom leaving dots on the back wall 😅

3:55 What is the resistor value? (what resistor are you using)?

Is it possible to connect these auto clickers (with jack port) to an arduino? if so, how? Thanks

They might have used the opposite side connector because the screens came with cables of a certain length.

I use that exact same app for some of my wifi switches for turning lamps on and off. To rename a device, just touch the little pencil/paper icon at the top right (you can see it there around 11:40 and on)

Thank you for this video, sir. I'm building a motorcycle and just picked up one of these modules with the laser to install as my headlight. I've been looking for a on it and couldn't find anything. Are you able to share any pinouts or amperage/wattage in addition to what you mention here?

No wonder it was 400.000 US$, just imagine how many people with specialised knowledge were engaged in developing, designing and building these things and its not like they sold in millions.

Always love your stuff Mike but for the life of me I'll never figure out how you sleep at night after putting fingerprints on all the laser and optic stuff. Every optic/laser vid😂 without fail.

Clear cam lens 😮‍💨

I'm curious about how it is driven on the content side. I read on the project page that it is a real time simulation of a school of fish. It would be interesting to know what software is used, and how the translation between the simulation to a RS485 stream is handled. Is it all one piece of custom software that outputs RS485 directly, or is it something like Max MSP with a translation layer?

Hi,does ups mode actually works in Uk?

This is the first time I've been surprised by a scale banana.

One can only imagine what kind of test substance you accidentally squirted all over the camera lens...

This guy and thunderfoot are are my KZbin heros!

"Apple-level aesthetic wankery" really got me! :) Unbelievable enclosure, man.