Stuff4Guys

Пікірлер

@arliniadrummonds4529 Күн бұрын

Did the molding stay adhered to the mirrors

@Reedic20 Ай бұрын

5.57

@tomjanoski7726 Ай бұрын

Is that lifted at all?

@Airmanmx1 2 ай бұрын

Hey homie, where did you buy the wheels!?

@gregorymccarley3318 3 ай бұрын

I've had the same feed issues on the elite single stack. It performed better with Wilson combat and Chip McCormick.

@froymen6995 4 ай бұрын

Purchased a used gun. Whined about it. Got, what appears to be a free gun, and still complaining.

@Vintagecollector08 4 ай бұрын

the honda elite are so ugly 🤣🤢HONDA DIO 1 and HONDA DIO 2 are the best classic honda scooters.. them honda elite are trash 😂😂

@bikegunexpert6010 4 ай бұрын

The elite 110 is a one off flop made in china Yamaha is better hands down

@Mainuh 5 ай бұрын

Thanks for the video. Worked fine on my new (to me) 09 X300R. Thought I’d left you know this video is still doing it’s job 12 years later!

@LafawnWright 5 ай бұрын

Im having a hard time getting a thermostat housing for my 2013.

@JoseGil-em1wo 6 ай бұрын

Hello, can you help me fix the sunroof problem on my Hyundai, it is the same as the one in the video?

@Misty_onwheels 6 ай бұрын

Kazuma is Australian I isn't it?

@victorrivas2350 6 ай бұрын

NOW this is what I'm talking about!! Great Idea!

@buckdangt3343 6 ай бұрын

You’ll be much happier with a legacy xl

@stevenhintz5508 7 ай бұрын

Just did this on my new Regent. The switch itself is normally closed so when you sit on the seat the switch opens the connection. You would think then by just removing the plug it would bypass but it doesn’t. On the plug itself as the original poster showed there is a spring loaded plunger. The plunger is connected to a Y shaped wire inside the plug that keeps the two wires connected together until you plug the assembly back onto the switch. Plugging it back in pushes the plunger in and disconnects the two wires from each other. You can either make something to hold the plunger in or just bend the little tabs in that hold the wire terminals into the plug and pull them out. I just put shrink tubing on the two wires and zip tied them under the seat.

@Ts68mo 7 ай бұрын

Sorry dude, but your being overly picky

@callanvoelkel6857 7 ай бұрын

Great video! Do you remember how much this was new? I've had one for a long time thats still in the box. Thanks

@Mr.HowToTech 8 ай бұрын

I'm glad you posted this, I was debating if the sun shade would work for our playground too, and now I see it will work perfectly

@cadiehl1 8 ай бұрын

Does not work.

@jaffer_7517 8 ай бұрын

Is the bolt pattern 8x16.5 or 18x170, I was thinking for f250 too but mines 2020

@timbaker6133 8 ай бұрын

2011 4.6 . Black and saddle leather. Owner for 5 years. Mechanicaly bulletproof. Suspension still original and strong. Hyundai replaced the abs module no charge under recall that has expired. Front seats suck! No lumbar or side support at all! Vague steering at best. Overall? All the power, great braking, good handling, decent ride. 90% of a BMW 5 series, or mb eclass. Both of which I’ve owned and loved. But for 1/4 of maintenance/ pain in the ass cost. Highly recommend the first generation genesis, especially the v8. She scoots for pennies on the dollar!

@elwap0 8 ай бұрын

😮That's a terrible installation.... really bad...im up to 2500 installs..I'd come over and redo iit for you but im in southern California. ..

@RobertSmith-bs4hl 8 ай бұрын

The comment section has comforted me in my purchase. I was worried i got a bad gun, but according to people kahr is great. Thanks guys!

@morganpeirce1121 9 ай бұрын

Video posted 12 years ago, I just used this trick for a simplicity landlord. I tried all the tricks, including “jumping” the leads - and nothing. I even bought new switches and that didn’t fix it. And it was this silly little spring loaded spot. You saved the day again!!! Thank you for this, solid gold gem here.

@M-qj7md 9 ай бұрын

My simplicity mower stops after 20 Min of mowing. Has to let it cool for an hour to restart. Any idea what could be the problem? Thanks

@brianbelmont6047 10 ай бұрын

What prop are you running?

@Coleton-qo3mt 10 ай бұрын

I'm pretty sure I have the exact four wheelers in that video is there any way I could get your number or Snapchat?

@NoahEdmondson 10 ай бұрын

This video is a click bait af

@Upt.Spider 10 ай бұрын

These ain't real complaints

@dannyb9140 10 ай бұрын

I've had CM9'S since 2012. Flawless function and disappears in a IWB. 6 rounds are fine for me.

@sBentonfamily 10 ай бұрын

Hmm. Carried my PM 9 over 15 years. Never failed to fire with any ammo, ever. Any machine can be dysfunctional. We lost two multi billion dollar space shuttles. Manufactures should repair or replace malfuncting equipment. Kahr is know for reliability. They should make sure tou have a reliable gun.

@MariaAyala-qq4lq 10 ай бұрын

Everything but nothing useful for my problem. My automatic transaxle doesn’t move forward nor backwards found small teeth broken

@jacknjill3000 11 ай бұрын

My used Zuma came with the mod with the 2 headlights, but I’m a year gone through 3 batteries and only used it once in 2 weeks. So I suspect it’s the dual headlight causing the battery drain and gonna see with one headlight, how the battery will hold. Bc these don’t have a a kick start, so when the battery dies, you’re stranded. Also, maybe why Yamaha designed these Zumas with one headlight bc of the battery drain? Anyway, I’ve read on these yt comments also on the battery drain issues

@jacknjill3000 11 ай бұрын

Turnout the used OEM part I got was for the taillight and took apart today for nothing. Bc I didn’t know I had the wrong part until I took the front apart. But for me, the front plastic part was not easy to take off & put back on like for you when the plastic part just fell off with a tug. I was able to return it and figured out the part I needed and the same seller had, but had listed as the taillight wire. Seems they had the listing no mixed up. So hopefully when I get the correct OEM headlight wire, it’ll all work out and the battery won’t keep going dead. Anyway, thanks for showing us how to take the panel off and at least I know how to remove and put it back together. I also don’t want to keep taking it on and off and don’t want to break a clip while I’m pounding back on and not knowing if the clips are aliened. Honestly, these scooter should be made or designed better and not everyone has a scooter lift or tiny hands to place it exactly so.

@blackrockbrewing5141 11 ай бұрын

Curious if you still have this camp kitchen, how it has held up.

@Thisandthatdude Жыл бұрын

Where can I get parts? One just landed in my lap. Doesn’t run.

@patrickbuchanan4444 Жыл бұрын

Had Kahr PM40. What a POS it was. Jammed, misfed, stove pipe. Sent it back to Kahr 3 times when they gave up and sent me a new one. Never fired the replacement and traded it in for a Glock. NEVER had an issue with the Glock, no break-in required and it functions perfectly.

@evolutionversuscreat Жыл бұрын

That's a long story for a short story.......

@baltimoreravens1515 Жыл бұрын

Lol sure u not looking for more free stuff from KAHR

@tonycastro6154 Жыл бұрын

they use to make fun of low riders or mini racers back in the days,,,not its luxury,,,lol

@steffens6946 Жыл бұрын

OMG this guy is out for lunch,he doesn’t like the colour of the brake calibre and wrinkles on the seats ,try and put a towel or foam under your child seat,and on and on,I have a 2009 4.6 still looks and feels like new with no problems nothing is perfect in this world,but this is a fantastic car.😁

@alexbungcayao826 Жыл бұрын

Just want to share my experience with my Para 16 -sx40sr limited (10 round mag) California residence here. Had the same problems, feeding and yes, recoil. Later found out it was the magazine that came with it was the problem, base was plastic and possibly weak spring. Found an all stainless steel 10 rnd Cali legal mag., problem solved and install recoil master. Gun now shoots flawlessly esp. with silvertip! btw, gun was still made in Canada.

@madbart214yomother7 Жыл бұрын

Thinking of getting one for the extra capacity, any tips on where to get the newer magazines?

@alexbungcayao826 Жыл бұрын

@@madbart214yomother7 Try Mec-gar, they have the 10 rnd and 15 rnd magazines.

@One.Disgruntled.American Жыл бұрын

I have the CT380 and i have a slight bow on my polymer as well but it doesnt seem to affect the functionality. Shoots just fine and no jamming so far.

@mohammadmahmoodi2696 Жыл бұрын

Thank you so much for the good info you provided. I had the same issue for months and every day Ihad to recaliberate the salt level again and again. with your info i recaliberate my salt level permanently and i do not hsve to do re caliberate again and again. THANKS ALOT

@HansZarkovPhD Жыл бұрын

My new k9 elite blew the extractor oit the side of the frame, i jjring me. 5 weeks for warrantyrepair, now i cant sell it for even half price, no dealers at the gun shows want it. Dangerous and unreliable gun

@lesilebishop6464 Жыл бұрын

I got that exact car same color same rims everything ❤

@joehughes5177 Жыл бұрын

Had one in 89. Mine would jam in the mag and not feed the next round. Apply sports and fire a few to the next jam. Miss that piece.

@robwilliams828 Жыл бұрын

Seriously, you put car seats on beautiful leather without any protection under to protect the leather? Nuts! Crazy!

@ed_cetera Жыл бұрын

This worked on my 2012 John Deere x320 for the mow backwards mode. I verified it by looking at the schematics of the RIO switch in the x320 Technical Manual The seat switch doesn't bother me, therefore I didn't implement the seat defeat. Thank you for the assist Sir

@Da_editor Жыл бұрын

How does your ride without a battery?

@Shortwheels316 Жыл бұрын

Never works. I have a brand new salt cell and my instant Salinity just reads 0 no matter what. These systems are a money pit

Ең жақсы KZbin

Пікірлер