Пікірлер
@aldrinkm6635
@aldrinkm6635 18 сағат бұрын
Actually all the parts are made in India that's great now they are important to your country
@Fenix66687
@Fenix66687 Күн бұрын
Same here. the best tires.
@MotoRevs
@MotoRevs Күн бұрын
Other than the Pilot Sport 4S, I really don't like another tire as much as these DWS-06 Plus.
@shensdad1663
@shensdad1663 Күн бұрын
Thank you! Great video and good step by step
@MotoRevs
@MotoRevs Күн бұрын
I'm glad you enjoyed it! Thank you for watching.
@hanksun267
@hanksun267 2 күн бұрын
hmm I thought pre-LCI is CBC???
@joerod7176
@joerod7176 2 күн бұрын
That size are the tips in MM?
@MotoRevs
@MotoRevs 2 күн бұрын
The chrome tips are 104mm, and the exterior carbon fiber wrapped part is 114mm.
@500xoe
@500xoe 2 күн бұрын
also, how long would you say the install took
@MotoRevs
@MotoRevs 2 күн бұрын
It took me about 7-8 hours. This is only due to the fact that you have to work from underneath the car and from on top as well. It's a very in-depth, tedious process, and you must be rather skilled and knowledgeable. It's a hard install, but it's totally worth it. Tight spaces and removal of auxiliary parts is necessary sometimes. But I'd say it's worth it! At the end of the day when you're driving around and you feel and hear the difference, you forget you even installed it.
@500xoe
@500xoe 2 күн бұрын
@@MotoRevs thanks for the detailed response, great video
@MotoRevs
@MotoRevs Күн бұрын
Anytime! Thanks for watching.
@500xoe
@500xoe 2 күн бұрын
thanks for this video i been wanting to see more on this intake
@MotoRevs
@MotoRevs 2 күн бұрын
Glad it helped!
@Uhlmandase
@Uhlmandase 2 күн бұрын
Does the oem radio still work when you are in carplay? And does it use oem microphones when making a call?
@MotoRevs
@MotoRevs 2 күн бұрын
Yes, and yes! Radio works with the CarPlay, as I've tried, qnd it uses the OEM microphone.
@aaronbonsu8635
@aaronbonsu8635 3 күн бұрын
i have a 2014 bmw x3 xdrive35i and wanna get cold air intake and downpipe. What tune would I have to get if I did that?
@MotoRevs
@MotoRevs 2 күн бұрын
I can't say for sure, but as I've heard you don't need a tune, but you won't get the most out of your modifications without one. You'll also likely have a check engine light from the downpipe (assuming you go catless or similar). The best thing to do would be to get a tune, so you can take advantage of your mods and get the most power out of them, and remove any lights or codes your car may throw due to your mods.
@aaronbonsu8635
@aaronbonsu8635 2 күн бұрын
@@MotoRevs I have a n55 engine I see some mhd tunes that range from 66-555$ which would be best for downpipe and air intake?
@MotoRevs
@MotoRevs 2 күн бұрын
Depends on what you want and have. You could buy individual stages, or, like I have, you could get the super license, with every stage, every option, and every feature. Granted, it is the most expensive, but you get what you pay for. Every single feature and option, and you can fine-tune it to your car and mods. That's what I'd recommend, especially if you plan on continuing to mod your car. If you buy one single stage, you don't get the multi-map, or all the options and features. If you mod your car more, or remove some mods, you may not be able to edit it to suit your car. H9wever, to get you up and running, and get rid of your CEL for your downpipe, id recommend looking into a stage 1 tuje. If your car has the required aupporting mods, maybe even stage 2 or stage 2+ That's just my 2 cents!
@Htxcarspot
@Htxcarspot 6 күн бұрын
FIRST C COMERMNETSSSSSS WOOO HOOOO I AM WINNER
@MotoRevs
@MotoRevs 6 күн бұрын
Bro is this on purpose or do your comments literally just not work 😭
@Htxcarspot
@Htxcarspot 6 күн бұрын
@@MotoRevs I am always first comment on purpose 😎😎😎😎
@jimmiecouch4487
@jimmiecouch4487 6 күн бұрын
Could you put a link in the description I cannot find the right part for the life of me
@MotoRevs
@MotoRevs 4 күн бұрын
For the relay or for the lights? I have part numbers for various parts in the description, but if those don't work, let me know and I'll try updating them!
@w4rdaddy927
@w4rdaddy927 8 күн бұрын
What happens when its raining?
@MotoRevs
@MotoRevs 7 күн бұрын
Rain doesn't affect this intake, even in lots of rain, any damage is very unlikely, even with such a high-flow intake like this BimmerHaus one.
@SamMK1N
@SamMK1N 8 күн бұрын
Just wondering… do you need to replace the drain bolt every time?
@MotoRevs
@MotoRevs 8 күн бұрын
Yes! It is highly recommended to do so. Same with cars, even. Most kits bring a new drain plug/bolt, anyway, so you should be fine!
@SamMK1N
@SamMK1N 8 күн бұрын
@@MotoRevs I’ve never replaced any drain bolt in any car and have had no problems not saying it’s better but I’m trying to figure out if that’s just recommended because my bikes manual dosent mention replacing it just cleaning it
@turbospool
@turbospool 8 күн бұрын
great work once again! I love my BHP intake!
@MotoRevs
@MotoRevs 7 күн бұрын
Thank you! Favorite mod for me so far.
@azknowsmore4798
@azknowsmore4798 8 күн бұрын
This is probably one of my favourite f10. Keep it up man
@MotoRevs
@MotoRevs 7 күн бұрын
Thank you! I really appreciate it.
@teleblack2069
@teleblack2069 9 күн бұрын
I love this so much, I want to put it on my 535i f10 but i live in California and it when it rains it rains a lot. Will the rain affect this mod? please lmk! edit: do you need a tune for this? or just plug and play?
@MotoRevs
@MotoRevs 9 күн бұрын
No! Rain will not affect this, as per Dan from BimmerHaus, and no, you don't necessarily need a tune, but, of course, to get the most out of it and take advantage of it, a tune would definitely be beneficial; but not necessary.
@Driven_Life
@Driven_Life 9 күн бұрын
Send me a link for that gold brace or is that yellow
@MotoRevs
@MotoRevs 9 күн бұрын
Sure thing! They're like an in-between yellow and gold. It's a great color, kinda like a mustardy yellow. Here's the link - a.aliexpress.com/_mOLa1J6
@TeknoTalks
@TeknoTalks 9 күн бұрын
Definitely need to get one for myself
@MotoRevs
@MotoRevs 9 күн бұрын
They might make it for the F36 435i! I'd check on their website, for sure.
@DWillz250
@DWillz250 9 күн бұрын
I want this intake so bad but $600 is kinda ridiculous
@MotoRevs
@MotoRevs 9 күн бұрын
With all honesty, I understand. I'm conscious of the fact that it is rather pricey, but, no other intake gets you this kind of sound, performance, or uniqueness. That's just my take, and without bias, by the way. I was offered multiple sponsorships for intakes for my 535i, but I went with BimmerHaus because of how unique and ground-breaking it is.
@rockieg02
@rockieg02 9 күн бұрын
@@MotoRevs Yup I just got mine just need to install it . And its $550 not $600
@BimmerHausPerformance
@BimmerHausPerformance 9 күн бұрын
Please note this is the ONLY intake that also includes a high flow inlet. If you bought another intake AND a high flow inlet you would spend more than 550. I hope that gives you some perspective! Thanks!
@Iam-ix4he
@Iam-ix4he 9 күн бұрын
Which wind visor is this?
@MotoRevs
@MotoRevs 9 күн бұрын
This is a KTM PowerParts FlyScreen, I actually made a video reviewing it on my channel. Check out my other videos to watch that!
@Iam-ix4he
@Iam-ix4he 9 күн бұрын
@@MotoRevs okay thanks
@rryan5888
@rryan5888 10 күн бұрын
So if you connect to the MMI system via bluetooth, does that mean it disconnects from the BMW bluetooth to the car? So if calls come in what happens?
@MotoRevs
@MotoRevs 9 күн бұрын
If im not mistaken, most phones can connect to more than one device via Bluetooth - this is how I do it: I connect to the car's iDrive for calls, and connect to the MMI PRO for audio. When I get a call, it goes through the car, but shows up on the MMI. It works flawlessly. Another option is that you could connect to the MMI for calls and audio, and adjust the microphone and gain settings according to your device and preferences. In any case, however you decide, it will integrate into your car and life flawlessly.
@victormontanez8393
@victormontanez8393 15 күн бұрын
Looking at your original intake system routing. I wonder if I can do this to my e92 n55 coupe.
@MotoRevs
@MotoRevs 7 күн бұрын
I'm not sure! I'd send Dan from BimmerHaus an email seeing what he thinks. It could be!
@josephkoenig1325
@josephkoenig1325 20 күн бұрын
still not as fast as a 2002 forunner sr5, my friends sr5 would smoke that hot dog cart
@MotoRevs
@MotoRevs 20 күн бұрын
Thank you for your opinion, Joseph. Please stick to playing Sea of Thieves. Thanks for watching!
@josephkoenig1325
@josephkoenig1325 20 күн бұрын
@@MotoRevs billy typed that out, my bad for logging in on screenshare, much love cardozington
@MotoRevs
@MotoRevs 19 күн бұрын
I had such a good feeling it was you bro why do you have this account 😭
@bve7397
@bve7397 20 күн бұрын
Coulda been me this summer but my duke decided to blow the head gasket 😢 hopefully il get it fixed these coming weeks, otherwise rip my summer..
@MotoRevs
@MotoRevs 17 күн бұрын
That's a shame! Hopefully you get it fixed, nothing like some fun summer rides.
@Htxcarspot
@Htxcarspot 21 күн бұрын
How am I the first comment every time?!?!?!?!?!?!
@MotoRevs
@MotoRevs 21 күн бұрын
LOL ok so maybe your KZbin isn't working, cause you definitely aren't the first...
@Htxcarspot
@Htxcarspot 17 күн бұрын
@@MotoRevs HOW CANS YOU SAY THAT TO YOUR DEER HOMEIE!! 😭😭😭😭😭
@johnshannon9
@johnshannon9 21 күн бұрын
Dood! You should not remove the master cylinder fill cap. You can compress your brake pistons worth no more effort while the cap is in place. Just website that you have room in the master cylinder for the fluid to be compressed pushed back up into said master cylinder. Brake fluid attracts moisture from the air, and that moisture will reduce the boiling point of the fluid, which means that the fluid can lose its ability to compress as moisture boils in the system. Moisture compromised fluid also has a much reduced ability to prevent corrosion within the brake system, as well. It is prudent to only remove the master cylinder cap if you are adding fluid, or performing a brake bleed or a complete fluid change.
@austinspalliero
@austinspalliero 22 күн бұрын
Hey I’m trying to get rear rotors for my f10 mine is 2011 msport but would it still be the same size? Or would I get the 345mm?
@MotoRevs
@MotoRevs 17 күн бұрын
Honestly, I'm not sure. I'd say your rear rotors would most likely be the 330mm option, as the fronts usually are 345mm.
@That_slowf10
@That_slowf10 22 күн бұрын
How my miles does your 535 have mine has 136k and I’m wondering if thats too much to tune maintenance has been done already
@MotoRevs
@MotoRevs 7 күн бұрын
My 535i currently has around 85,000 miles; I'm not sure, I don't believe I'm qualified to tell you that. As I've seen, a lot of N55s can take tuning up to 150k miles, but, like I said, I can't say for sure if you should or shouldn't.
@teleblack2069
@teleblack2069 22 күн бұрын
Love the 535i! Amazing build, am actually getting my 535 f10 soon as well, I wanted to ask in your time of owner ship of your bmw what issues have you ran into the n55? And the car overall?
@MotoRevs
@MotoRevs 22 күн бұрын
Thank you! I really appreciate it. As for me, the only issues I've run into are the charge pipe breaking and my cylinder 5 ignition coil going out. That's it! Knocking on wood, it's been smooth sailing. Really pleased with it, and, of course, the car itself is great. Cruises happily at speed, quick, comfortable as hell, and it really doesn't look like a 2013 model year. Compliments from friends and strangers - it's a great car all around.
@teleblack2069
@teleblack2069 22 күн бұрын
@@MotoRevs yes I remember that video, am more confident in mine thank you so much for the feedback
@Turleyswheels
@Turleyswheels 23 күн бұрын
Why didn’t you show the oil glass to see how high or low it was otherwise brilliant ❤
@DWillz250
@DWillz250 23 күн бұрын
People say catless will cause a bad smell. In your opinion, is it really that bad or can anyone who isn’t sensitive to smell tolerate it.
@MotoRevs
@MotoRevs 23 күн бұрын
It really doesn't bother me. You can't smell it inside, you can't smell it while driving, and you can't even smell it most of the time with the windows down while idling. The only time you can smell it is if you go to the rear of the car while it idles or revs. Other than that, you literally wouldn't know it's catless. It's different for every car, but for the most part, this car really doesn't have a smell at all.
@SHWELL11
@SHWELL11 23 күн бұрын
It isnt that bad. It is more noticeabke when you go an E mix.. But even that isnt so bad.
@PovertyDIY
@PovertyDIY 23 күн бұрын
Awwww yeeeeaaaaah
@MotoRevs
@MotoRevs 23 күн бұрын
Awwwww yeahhhh
@melovicdomingo998
@melovicdomingo998 26 күн бұрын
what size are your spacers, and where did u get them?
@MotoRevs
@MotoRevs 20 күн бұрын
The Spacers are 25mm, and I'm not sure where I got them from... I believe from eBay, but I can't say for sure.
@pedrokd5439
@pedrokd5439 Ай бұрын
Good job 🎉
@MotoRevs
@MotoRevs 27 күн бұрын
Thank you!!
@brandenfrancis6440
@brandenfrancis6440 Ай бұрын
Did u have to put a gasket in the tmap? Or did you just screw it in as is?
@MotoRevs
@MotoRevs Ай бұрын
If I'm not mistaken, the T-Map sensor already had a sort of O-ring on it, so I just put it on as is with that O-ring without touching anything. Basically, it's just a transferring of location!
@judechopper
@judechopper Ай бұрын
I have the Rdesign T5 in Sydney Australia, Mods include modified standard turbo with roller bearing, bigger fan and scroll and larger strengthened waist gate and ceramic coated, after market cam and head Studs little port work/ grinding, 600cc injectors and the biggest revtech intercooler i could fit, 3in stainless exhaust, 3in charge pipe, and 2+ tune, with NO crackles added, around 397hp at the wheels 0-100km /h 4.5sec if I can change gears quick enough, love these engines $7,500au spent on it!
@Carbon_F10
@Carbon_F10 Ай бұрын
Loving the videos and all the work you are doing
@MotoRevs
@MotoRevs Ай бұрын
Thank you! I really appreciate it.
@Htxcarspot
@Htxcarspot Ай бұрын
. FIRST COMMUNT YAY AND FIRSTT CIEW
@MotoRevs
@MotoRevs Ай бұрын
YEAHHHH I should update and some new emojis...
@turbospool
@turbospool Ай бұрын
heck yea dude. DWS06 is the way to go! Im on 4 years on my set and still grip/ ride like new despite the wear. I do have to replace my rears before the winter though lol
@MotoRevs
@MotoRevs Ай бұрын
That's what I'm saying! I just love these tires. Like I said in the video, I'm a Michelin guy, but these tires are something else. I might get them every time from now on, or I could experiment a bit, depending on the car...
@alimajazz
@alimajazz Ай бұрын
you gotta powder coat those rims bro
@MotoRevs
@MotoRevs Ай бұрын
I got something for this car that's better than powder coating; hopefully should be public sooner or later...
@josephkoenig1325
@josephkoenig1325 Ай бұрын
this guy reminds me why i hurt small animals
@cairnhill64
@cairnhill64 Ай бұрын
the sidewalls on your front and rear tires are different. 275/40/19 is 110 sidewall but 255/40/19 is 102 sidewall. the 40 just represents that 40% of the tire width is the sidewall height.
@MotoRevs
@MotoRevs Ай бұрын
Correct, I believe I said that in the video. If not then I just completely forgot! I did all the math and no combination would get me the exact same, which isn't really what I wanted, anyway. I like the rear tire sidewall being taller than the front, as well. Thanks for watching!
@cairnhill64
@cairnhill64 Ай бұрын
@@MotoRevs I am running 245/45/19 of the same tyres for both front and back. Mine is xdrive though.
@MotoRevs
@MotoRevs Ай бұрын
That's great! I hear the X-Drives are a lot of fun. I haven't actually gotten the chance to drive one, yet.
@G82_M4
@G82_M4 Ай бұрын
is that telfair
@MotoRevs
@MotoRevs Ай бұрын
Yes, actually!
@goncalojesus5670
@goncalojesus5670 Ай бұрын
Does the steering wheel controls function
@MotoRevs
@MotoRevs Ай бұрын
Yes! Volume buttons still work, and so does the scrolling wheel. It all integrates perfectly.
@KabirBorle
@KabirBorle Ай бұрын
Your car is so nice 😍
@MotoRevs
@MotoRevs Ай бұрын
Thank you Kabir 😍
@F10_Jaber
@F10_Jaber Ай бұрын
Hey guys, I uploaded my version of this specific setup but the only difference is that I have a res delete unlike this video. Check it out on my shorts incase you want to know how the resenator being off sounds accompanied with the cutouts before the muffler.
@jsemp-vw2py
@jsemp-vw2py Ай бұрын
does the parking camera and sensor work well?
@MotoRevs
@MotoRevs Ай бұрын
Yes! It still uses the favtory camera and sensors, so it just pops them up when you go into reverse or when you press the PDC button. It entegrates perfectly!
@hunza0150
@hunza0150 Ай бұрын
engine swap the mazda now
@MotoRevs
@MotoRevs Ай бұрын
Great idea
@jethrohill6102
@jethrohill6102 Ай бұрын
Great walk-through video. Much appreciated
@MotoRevs
@MotoRevs Ай бұрын
Thank you! I'm glad you enjoyed it.