In the not so distant future as I would like, I have to rebuild my RX8 S2 , hopefully it will be as easy as the video ajajajaj
@rakeshnayak3824Күн бұрын
🔊🔊🔊💓💓💓💓💓
@785fКүн бұрын
That's an amazing video, brother. It's really impressive work, and I wish I could do something like what you did in my Tahoe.
@fredyr11253 күн бұрын
Vtec in second gear 😮
@mrbrini58194 күн бұрын
Said budged.. 800dollar turbo
@khmerboogietonnaboy57575 күн бұрын
You clear the rears trail arm ? Idk why mine is hitting the wheels . What’s your camber set to?
@JCYT5 күн бұрын
Hi mate Yes I clear no problems 15x8 +35 Whats your offset?
@matsbjrnvik57445 күн бұрын
I am completely new to Hondas, just picked up my first EJ9, would it be the same in EJ9 1997mod? To me it looks the same atleast
@xlebxlebylllek70306 күн бұрын
Mighty Car Mods ?
@detonationpyrotechnics41566 күн бұрын
I’ll keep my h22a but it’s cool. Except for an 800 dollar turbo on a cheap manifold that will certainly limit you
@JCYT6 күн бұрын
Enjoy ya brick I'm quite satisfied with the setup.
@Buildingtarmoo7 күн бұрын
So, you have a 12-240 inverter to run this machine?
@JCYT7 күн бұрын
Yes that's correct. Redarc 2000w You'll need a 2000w minimum
@detonationpyrotechnics41567 күн бұрын
Why on earth would you put an 800 dollar on sale turbo to a fkin cast log manifold? That’s just foolish and wild, you’ve already spent more on a turbo than you should have for this motor you should have bought a better manifold. It’s like wiping before you crap. It doesn’t make sense
@JCYT6 күн бұрын
I can understand why you may think this way. The beauty of a custom kit is being able to pick and choose how to spend your money. This is a budget turbo kit and there has to be some compromise between performance and reliability. I choose reliability any day of the week for what i do with this car. This setup is proven now, 7 months on and 5 trackdays without a single mechanical fault. There is no fabricated manifold remotely close to this pricepoint. We don't even have any off the shelf parts let alone turbo manifolds for the D series in Australia. Nothing wrong with cast. They are bloody strong and although their design is not the most efficient, that is the compromise i am willing to spend more on a turbocharger. I'm not sure you make any sense. Would you put a $200 dollar turbo on an $800 manifold?
@NickBoellner8 күн бұрын
What part of Aus is this in? Id be down to import my car to partipate and take on a surf.
@JCYT7 күн бұрын
Hi mate We are in NSW. Hoping to expand towards QLD as well
@glynbray72158 күн бұрын
Great video and good ambassador for joying.
@Jsnow1048 күн бұрын
They all sound good!
@mauroprocks210 күн бұрын
La silicona no se aplica de esa manera!
@autoaus10 күн бұрын
The mirage is the EG from Cartier
@andrewblack157510 күн бұрын
Never mount a cable gland on top of your box
@andrewblack157510 күн бұрын
It cannot seal on an uneven/non circular wiring loom
@JCYT6 күн бұрын
hey mate, sorry i missed this. Yes you can still seal it but shrinking an adhesive lined heat shrink on top of both gland and conduit.
@tonem42711 күн бұрын
Hello from Miami, Fellow rotary enthusiast. 🤙🏾
@JCYT6 күн бұрын
Thanks for commenting! G'day from AUS
@user-ju2bg7kd3s12 күн бұрын
Low smoke 2T ?
@tariklaarej225914 күн бұрын
Arb reverse camera HDR bro
@willsonpoon556815 күн бұрын
After seeing your upgrade, I also upgraded.
@JCYT14 күн бұрын
Awesome! How are you finding it?
@willsonpoon556814 күн бұрын
@@JCYT I really want to show you the pictures after my renovation, but I can't send them here. Do you speak Cantonese???
@mathewjphil15 күн бұрын
Wyong Toyota is amazing! My Aug 2020 79 series had a fuel gauge that stopped working. I took it to both Rockdale and Sutherland Toyota (same owner) and they wouldn’t fix it as I had an after market PCOR tray and canopy. Fast forward 2 weeks, I broke down on the highway near Wyong and the fuel warning light and engine warning light came on. I had heaps of fuel, turned out the fuel breather failed and the tank shrunk by 1/3. Towed it to Wyong and they fixed everything, new fuel tank and fuel system plus fixed the fuel gauge. It did take 3 months for the parts to come in, however they kept me informed, they paid for the tow and returned the cruiser like new. Legends.
@peterthomas35016 күн бұрын
Bloody legend. Love the details
@JCYT14 күн бұрын
Thank you 😊
@captninsno232016 күн бұрын
Have you passed the db test for nsw police.? What porting.?? Im about to do the same to mine.
@rjaybruhh17 күн бұрын
*YES! We nees all the d series wiring videos 😭 im still trying to do the big radio upgrade video you released awhile back 😢*
@rjaybruhh17 күн бұрын
*_Yoo I can't wait to see how this goes!_*
@AlwaysApproved17 күн бұрын
That honed coolant spacer is genius! I see they have a b18c2 version, do you happen to know if it would fit USDM B16A2? I'm assuming it would.
@MyIronman818 күн бұрын
Is he talking about going fast in a Honda Civic a 1.3 L four banger oh no I meant maybe 60 miles an hour around the track if that unless you have a k swap Civic
@JCYT18 күн бұрын
kswap is so shit haha
@noahjbarr18 күн бұрын
You can’t put it under one of the top ladder steps
@JCYT18 күн бұрын
Why's that?
@noahjbarr18 күн бұрын
@@JCYT oh as in I was suggesting it haha. Though if you did it there you wouldn’t see the bars and it would be sweet
@JCYT18 күн бұрын
Oh haha Yeah took a few attempts for me to figure that out 🤣
@SPL8820 күн бұрын
I’m assuming this would work on the new 76 series?
@JCYT20 күн бұрын
I'd assume so! Unless there are safety features built in to the new model factory head unit i don't know about
@mackenziericketts668621 күн бұрын
Mate you are a pro best 12v video out! I just have a quick question I saw you have ran power from the start battery to the manager 30. And all your negatives to a common terminal on the back of the board going to the shunt before auxiliary battery. My question is have you grounded the auxiliary battery separately or is the feed from the start battery all you need ?
@JCYT20 күн бұрын
Hey mate sorry i actually don't remember exactly and i realised i didn't show this well in the video. What i believe i did was run both positive and negative from the starter battery to the manager 30 (not just one positive feed). Yes it's extra work, but personally i don't like grounding to the chassis. This comes straight from the manual "The Manager30 is capable of drawing up to 50A from the Vehicle Battery (which may be several metres from its installation location) and is limited to 30A output to the House Battery. The installer needs to ensure the appropriate cable is used to connect the positive and negative connections of The Manager30 to both the Vehicle Battery and the House Battery." Appreciate your feedback!
@mackenziericketts668619 күн бұрын
@@JCYT ok I get that thanks, and the negative common lug on your 12v board is the one that handles all the loads from accessories and inverter ? I’m just having trouble figuring out if I need to run a really large negative cable to chassis that can handle a 2000watt inverter and accessories which would be very hard to push through a canopy wall or body gland cheers!
@robertjennings161221 күн бұрын
Hey Mate If you have brake problems I would get a Marks hydraulic brake booster. Best mod you can do. I have one and it is amazing.
@JCYT20 күн бұрын
Thanks mate Yes it's been recommended to me! Once they are back in stock, i will be trying out a set of brake pads front and rear. But will consider the hydraulic booster if it comes to that
@AlanSD190422 күн бұрын
Picking a ek up soon will be my daily want to build it from the ground up
@JCYT20 күн бұрын
They're awesome cars! Build it how you want
@HillsMobilePT22 күн бұрын
👍
@garryhill449422 күн бұрын
Great job explaining the wiring rear camera up, Jonathan .
@JCYT20 күн бұрын
Thanks Gary! I personally think i did a shite job filming that. Hope it made sense!
@dustyfarmer22 күн бұрын
Legally, you cannot have any strip or sticker that covers your wiper blade sweep area on the windscreen and you'll see those wipers do almost to the top of the windscreen.
@JCYT20 күн бұрын
Yeaaaaah i just bought a roll. Will see how i go
@dustyfarmer20 күн бұрын
@@JCYT Just cut the required amount off your wiper blades. Sweeeet.
@markh667622 күн бұрын
You need a 90° camera for truer distance perception of following vehicles, distance to following vehicle will be close to actual whereas the typical 110 &120° are like convex side mirrors. You don't need the camera up high either, it's better down lower around the height of your tray or side rear vision mirrors, best for more level view of following traffic as with your mirrors.
@JCYT20 күн бұрын
Hey mate thanks for the feedback! I think i will try a 90 degree camera. Mine is a 120. I do like having the camera up that high. Was particularly helpful at the boat ramp last week. But i can see how that would help with perception.
@einfelder826220 күн бұрын
@@JCYT I was about to say the same thing. 90 degrees - Elinz has one.
@johnnytrannnn23 күн бұрын
retro visor is nice but you have to drill into the pillar
@JCYT20 күн бұрын
Yeah... i'm not sure
@emilegerungan362823 күн бұрын
Nice 👍 😊
@leonelcharles574723 күн бұрын
do you have a link for everything you bought?
@JCYT20 күн бұрын
Hi mate Too many parts, be hard to share all the links. I've included a list of parts in the description
@bluseman-ov6nk23 күн бұрын
Fantastic video!! Tons of ideas for sure! 👍🏽 Thank you!
@JCYT20 күн бұрын
Good luck mate!
@ElijahTichborne24 күн бұрын
thats awesome!
@JCYT20 күн бұрын
Thanks mate!
@single_cam919924 күн бұрын
I have a question I think you would be able to help with, have you ever had g101 and g151 issues? Well only conclusion I came up with is because the car sits and dielectric grease is the wrong grease to use because it won’t sweat out condensation. I was getting like flash pop ups in data as error codes for literally every sensor, cleaned everything it all went away, car was fine for a year as it ran heat and there and the last year it has been in storage pulled it out yesterday and it’s back. I read about this, dielectric grease locks in moisture that’s in the metal and it can’t be passed threw that particular grease, I’ve tried carbon grease it’s not that great of conductor and theoretically neither is dielectric grease. What would be best to apply to this besides oil Evan tho I know oil will separate for the water
@JCYT20 күн бұрын
Hi mate I'm sorry but have never experienced those issues. To me it sounds like a sensor grounding issue.