biasi 😂😂😂 is primark of boilers 😂😂

Although I have the 2 blue knobs showing is it ok if the pressure goes up with just one and just use the one? Or does it have to be 2?

I stopped watching after 2 minutes because I was getting sea sick.

Thanks to your amazing video, Ive just replaced a leaking diverter valve on ky ecoTec Pro! 👍 Thanks so much for sharing the video, it was a massive help and saved me a fortune Cheers Mate 🙏

The most valuable KZbin video I have seen in n a long time.

Nice work, but I'm not sure having it installed in a cold loft space is a good idea.

Good job brother

I have a 2 year old intergas combi 125 with a clean heat exchanger + condensate trap,new igniter , good gas pressure but it puts up a #4 error daily any ideas.

Good video !

Beutiful dont know what else to say.👍

Thanks a lot🙏

When I tried bleeding our radiators, air didn't come out it but the water coming out was black unlike what U saw in videos

When I pull the blue lever to top up the pressure nothing happens on Worcester Bosch Could you please let me know what could be the problem

Changing the radiator won't fix the problem????

Dear ,i don’t understand why some people promoting those testo garbage, they using same foreign parts like cheap chinese products, to be honest they don’t pay you for promoting of thier products? i analyse some of those testo and i can ensure you it is a cheap crap

Thanks Mate !!

Safe to assume you only need to do this if you don’t get the FGA readings you want. I practiced it the other day in the workshop with a logic I have in stock but have yet to do it in the field.

Thank you. Is the sound from the water spray louder than the pump when listening a few feet away from the shower :) We have a very noisy Bristan shower that we want to change to a quieter show. Despite being advertised as silent, they of course aren't and can't be!

You are a legend. Just saved us as well. Superb job. Manuals from these vendors are completely rubb*sh

What if blue nozel doesn’t move

Hi thanks for the great step by step guide just fitted one and working great you made it easy for me thanks again saved me loads of money. Great job.

If you are having rust all over everywhere this is an earth fault take it to an electrician as your car is throwing electricity on the body usually through coolant system it is caused by an engine earth wire that is broken inside.

Roofs on vans rust early because water seats in there, sun burns wholes in the paint, water droplets work like a magnifying glass I went up there on mine and brushed it all off with a metal brush, brushed it all clean than swiped it all off and wiped it down with thinners until I had paint coming off on the rag and I had done that methodically on the entire roof in very small areas... ...you want to brush the rust off clean it and quickly melt the paint closed over it again... USE LINT FREE RAGS After that wait till the paint fully flashes off and at this point the rust is treated and the paintwork very lightly re-sealed but good news is the paint thinned down by the thinners actually fills these micro holes all the way back to the metal before it rust flashes. Now you have 2 options for a durable finish either original or epoxy based paint Epoxy based paint I am talking about is truck bed paint can get it in different colours. (Faster job as you can spray right over the 120 grit sanded clear coat) If aiming for original finish mark a horizontal line along the bottom edge of the roof curve line on the sides mask the sides of the car by folding the edging painters tape back on itself so half the sticky side faces out on both sides of it creating a infinity edge that will catch excess paint fathering the edges into the existing paint (sand the surface with 600 grit untill all the clear is off and then spray it with 2pac spray cans of automotive spray paint. Look up tutorial on how to spray with spray cans and apply rules for prep as above, if you get the above prep right the results will amaze you and they will be durable.

Hi there, my gauge is on 0 and doesn’t move at all when I open the value. What might be causing this issue? Thanks

And constantly bleeding radiators means their is a leak and constantly letting fresh water into the system rusts and deteriorates your radiators 🤔

This got the boiler going, but then the water pressure gradually dropped down again once I’d put the blue knobs back, and the boiler switched off. How can I make sure the water pressure stays okay?

can this run a shower?

Can you please specify why it's rubbish? I was looking at a 436.. looks same layout but some improvements.

Thank you so much for your video saved my 80 pound call out charge. Thank you so much

Waste of time video

I got opposite problem. Hot water powers thru rads. Cant get them to have more than 5 defrees difference and that with SEVERE restricted flow 😔

Thank you so much

Hello I need your help please I have the same water heater but it's stopped to work I don't know the effect

What’s the difference between inhibitor and cleaner ?

Very helpful video. Thanks

Worked 😁👍🏽

My filling loop is only connected on one side, other side where water comes out is not connected, have low pressure error code, does it need to be reconnected, please help as have young family

Hi, please do I need to turn off the radiator when bleeding it? Thank you

I am steering towards Anton....

Kane are thieves. 10th year on 455 they want £389 inc vat. Wont be bothering with re calibration and go for another FGA, hence y I am watching this video. About 10 year warranty - I disagree, they would charge me for consumables. I would not go for Kane anymore, a few more GSRIs in the last 3 years have also left Kane.

Thank you for your help. It was clearly explained.

My radiator is warm on the slim sides but cold on the front and top

Aslaamalykum just a quick my brother wouldn't you put the pressure reducing valve before the basin so all oulets are balanced jazak Allah khair

I don’t have the 2 blue knobs in my boiler, just the yellow and 2 black knobs, what do I do?

Terrible boilers forever breaking down after 2-3 years. Pcbs seem to go for fun.

Its cool, but I heard too many stories about burglars hiding behind the glass and killing the house owner afterwards bruh

Boiler? Gas.

Fucking life saver, thank you so much mate ♥️

Great idea until you gotta lean over to try and work on it . 😢🤗

Radiator??