4 ай бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@TrevorBruce-f3l 16 сағат бұрын
We have Gemstones on our house. This doesn't do Gemstones justice. There are much more vibrant and unique lighting patterns they could have used to show the Gemstone lights in action. Plus, the Gemstone lights are VERY robust and weather proof. The only visible wiring or hardware for the Gemstones is the Controller, which is usually mounted in the garage.
@kennagel3989 19 күн бұрын
Do this un snap just as easy should bulb replacement be needed?
@jroweinc 19 күн бұрын
@@kennagel3989 absolutely! In fact the latest design doesn’t “require” you to even use the vhb 3m sticky pad (although you can if you want.) With the perfect fit puck cover design the light is secure and can’t fall. So, if you ever want to change out the lights or upgrade… a changeout would be relatively easy! Snap off snap on so to speak. 🙂
@trevdawg2 27 күн бұрын
why do you use Govee rather than the more commercial grade stuff like Minleon for instance?
@cavalierssr 27 күн бұрын
What if you have peaks?
@jroweinc 27 күн бұрын
@@cavalierssr not a problem. My next video will show that. Most all our installs have the peak lights. It’s no problem. The puck cover works at the peak also.
@kennagel3989 3 күн бұрын
@jroweinc thanks look forward to video
@kennagel3989 28 күн бұрын
If and when we replace a light bulb or a light string is it easy to pop off the puck covers and track?
@jroweinc 27 күн бұрын
@@kennagel3989 absolutely.
@kennagel3989 19 күн бұрын
Cool thx
@MrWayne69396 28 күн бұрын
How many inches from the bulding did you guys mount the lights or what has been the best distance you have found to be?
@jroweinc 23 күн бұрын
4” to maximize actual spread of lighting and the architectural “bell/ triangle” shadow look
@ThurnisHaley 29 күн бұрын
How much do you charge for a single story? Is there a typical price per foot?
@russelllevasseur6004 Ай бұрын
What is the spacing from the wall?
@jroweinc Ай бұрын
@@russelllevasseur6004 we recommend 4”. However, based on the constrains of the home it can vary from 2.5”-4”. If the soffit isn’t wide enough for 4” to be reasonably close to, or short of center… we split the difference.
@dasllamas Ай бұрын
I preordered my govee pro perm track. I cant wait to get them so I can get mine installed. Thanks for the video!
@jroweinc Ай бұрын
@@dasllamas that’s great! Thank you for the order and appreciation on the video. Backorder and new inventory processing is now underway. Thank you for your patience as we catch up from the high demand and delay we experienced while moving mfg to the USA!
@klrwhizkid Ай бұрын
Nice touch running the connections through the soffit and into the attic. You made a very professional-looking installation!
@jroweinc Ай бұрын
Thank you for the kind words! Glad you liked the approach.
@dennisparker9566 Ай бұрын
Great job. Im curious where you put the booster on the back with the y splits.
@jroweinc Ай бұрын
On this specific install, I believe we placed it on the upper level near what would be considered the “5th strand” when you y split you kinda have to use best judgement. I would recommend putting it in line with the run containing the most strands.
@roberthancko1607 Ай бұрын
Seems like everyone shows how to install the lights, but no one takes the time to show us how use the Govee Home app. Is this something you can show us? How to connect etc. Thank You.
@jroweinc Ай бұрын
@@roberthancko1607 you want to check out @jbysdiytv
@SKOLXRP Ай бұрын
Why did you spray the tracks after install and not before?
@jroweinc Ай бұрын
Moving the tracks around during install/ up and down the ladder etc can make it easy to scratch them up. Also, painting after will create the best blended seamless look with the home in the end IMO.
@GrahamScholton Ай бұрын
When you go without track, is there a trick to keeping the wire flat?
@jroweinc Ай бұрын
The only way to get govee wire to lay near perfectly flat is to install in very warm weather, lay the stands out in the sun, or lightly heat them up inside, or in a garage. Even then, it is near impossible.
@GrahamScholton Ай бұрын
@jroweinc thanks! I ended up using track
@jroweinc Ай бұрын
@ that’s great.
@GrahamScholton Ай бұрын
@@jroweinc biggest headache now is figuring out how to do the peaks....I have a 3 story so it's pretty sketchy up there
@jroweinc Ай бұрын
@@GrahamScholton yep, lift, or 40’ ladder perhaps? Likely with an insured experienced professional would be my suggestion.
@Merica79 Ай бұрын
15k Install beautiful job.
@jroweinc Ай бұрын
Thank you for the kind words. Glad you enjoyed the project.
@tim9662 Ай бұрын
Two questions. My house has soft fascia, the material is thin but not too flimsy. Are there any problems installing the Govee lights on soft fascia? Also where do you buy the tracks for the lights? Your install is very clean.
@jroweinc Ай бұрын
Might need to test your Brad nail gun settings a few times to dial it in for the right depth, or select the proper screw. However, no, I don’t see any issue. Tracks can be ordered at www.govpermtrack.com or purchased right from the KZbin shop link on my channel. Thank you for the kind words!
@TheHobbyExclusive Ай бұрын
Let me know when they’re available in black I really don’t wanna sit there and paint 200 feet
@jroweinc Ай бұрын
I would imagine you could use thumbtack or task rabbit to hire inexpensively to get them painted pre or post install. We tend to shoot for exact match on the painting hence offering in white only.
@TheHobbyExclusive Ай бұрын
Is white the only colour can they come in black
@jroweinc Ай бұрын
@@TheHobbyExclusive they only come in white. However, are paintable to match any color.
@DimJongUn Ай бұрын
Bro, no need for the over the top intro effects. Also, drilling through the wood like that is about the dumbest thing you could do for your customers. Better ways to hang those lights without compromising the integrity of their home.
@jroweinc Ай бұрын
The intro effects are much more subtle on your channel. While you might believe they still take the time to build homes with actual support bearing corbels...That is not the case here. These are what are called in the industry "faux corbels" and provide aesthetics only. They are nailed onto the exterior merely for looks and serve no structural purpose.
@Jakethepwasher Ай бұрын
Bro. $40-50 laser tape measure for peaks, tape or wheel for gutter lines . So fast lol
@jroweinc Ай бұрын
@@Jakethepwasher also works. Wanted to offer a method (which I actually use) for all those that don’t have a lazer or wheel to get an idea of how much to order. However, yeah you aren’t wrong either.
@blainehouser4354 Ай бұрын
Love my Govee Light! Great for any Holiday!
@jroweinc Ай бұрын
It really is!
@gobrad Ай бұрын
Thank you for this video 👍 I purchased the 100ft pro and ran short of one segment for my porch… Sadly I can’t continue because Govee are outa stock 😔
@jroweinc Ай бұрын
Hopefully this has been remedied for you. You can usually find extra strands in facebook groups, marketplace, or ebay.
@alphaarun24 Ай бұрын
Where do we get this?
@jroweinc Ай бұрын
www.govpermtrack.com
@dennisparker9566 2 ай бұрын
Awesome information. I am in the middle of install and need to make 2 y jumps, both with a immediate light run on one end and 20 ft extensions on the other side of the Y. Assuming i splice an extension midway on each 20 ft run to get the booster, should this work
@jroweinc Ай бұрын
Should, although I reccomend using the exension up stream toward the power in full then adding as short of splice wire as possible that way. There is more than one way to skin a cat, the important thing is not to damage the square driver and in the case of the 12ft extension I believe you need both.
@dennisparker9566 Ай бұрын
@jroweinc thanks, I utilized your video to make the y splice, and it works great. How would you assemble a 20-foot extension?
@DavidKcPrice 2 ай бұрын
Im a 2 year recurring installer in Kansas City and Missouri, having alot of quotes pending, alot of shoppers that have a max budget of $400 for installation of a 150f with peaks! How would you recommend i get ones awaiting response closed and approved?Got 4 installs pending to complete, on my 14th for the year 2024
@jroweinc Ай бұрын
The best advice I have is for you to offer your services focused on the value you provide, rather than on price. If you aren't able to get the price you feel is deserved, become more valuable. While I know it can be hard to turn customers down...and we all have to earn a reputation and experience over time....to build said value. However, sometimes you may not be in someones budget if you are valuable enough.
@pchannan 2 ай бұрын
Quick question - can the main power plug and controller be plugged into a second floor soffit outlet? Is there need to access this after the install is done?
@jroweinc Ай бұрын
Yes it can be installed there. However, you need access to it to sync and reset the system from time to time. It is also best to place controllers and power supplies out of the weather.
@jonathanmoore5929 2 ай бұрын
I really need the covers. I emailed you about
@jroweinc Ай бұрын
EFFFFFF, apologies. Shipping tomorrow.
@1219ess 2 ай бұрын
This is horrible
@jroweinc Ай бұрын
Thank you for your kind words.
@deputydog_9164 2 ай бұрын
What do you use to extend the gap from 1st and second story. I have to jump from first to second and am wondering what kind of wire set i can use other than the govee extensions..
@jroweinc 2 ай бұрын
I use 20g, 3 conductor, stranded wire. Link should be in description. Thanks !
@bhasins 2 ай бұрын
Can I connect a Y to 2 other Y connectors to create 4 LED strips to flash lights in the same pattern? I am using Govee RGBIC (H618F).
@jroweinc Ай бұрын
In theory yes, this is one I have not tried yet.
@allwecanwash 2 ай бұрын
How are we running those wires up into the attic? Share the secret sauce Jrowe 😭
@jroweinc Ай бұрын
You will be able to find all this info shortly after all the holiday rush. I know that doesn't help now....however I have a whole program coming for you.
@pauls2182 2 ай бұрын
Subscribed from Round Rock.
@jroweinc 2 ай бұрын
Thank you so much! Welcome.
@gracehomeservicesllc2476 2 ай бұрын
This looks absolutely horrible. Has no tracks, went through the rafter tails. This is a joke right ? This has to be a joke
@jroweinc 2 ай бұрын
You understand the finished product had tracks. Granted they were before I created www.govpermtrack.com
@gracehomeservicesllc2476 2 ай бұрын
What in the world did you do. Lol bro spenine help this guy
@jroweinc 2 ай бұрын
Did you notice the lower level eave of a few lights with tracks. That was when I first started videos and I suppose I didn't show the finished product. ;)
@khoatran1147 2 ай бұрын
Which the pro kit 200ft, where do you place the booster when connect to the Y split?( what if I have two strands on the left and the rest on the right Y). Thanks!
@jroweinc 2 ай бұрын
you want to place the driver/ regulator (technically not a booster) as close to the 5th strand as possible. This devise actually serves a voltage fluctuation device that protects the lights and helps them function optimally. I generally place where it is conducive to the architecture of the home.
@patrickuzzle9736 2 ай бұрын
Do you have a video on how to do the y split?
@ApocalypticSiruZ 2 ай бұрын
I second this. Can't find a decent video on how to do a y split, would really appreciate if you could demonstrate.
@jroweinc 2 ай бұрын
Training coming for this. However, you can see the principal using the govee connectors here (principal is the same with our without govee connectors): kzbin.info/www/bejne/jWjaYX2qbKutd7c
@jroweinc 2 ай бұрын
kzbin.info/www/bejne/jWjaYX2qbKutd7c
@anitaperez6005 2 ай бұрын
Please help 🙏 looking for someone who can give me an estimate on something like this. Thanks
@jroweinc 2 ай бұрын
Where are you located ?
@ajynus6165 2 ай бұрын
I am looking forward to that training program you mentioned.
@jroweinc 2 ай бұрын
Excellent. Almost ready!!!
@tomatogod1 2 ай бұрын
Which clip size did you use, the 12.5-14mm for outdoor govee lights 2
@jroweinc 2 ай бұрын
8/10mm actually
@NakiaFitch 2 ай бұрын
What recess box are you using
@jroweinc Ай бұрын
Though they worked, they weren't perfect fit. So, maybe this: govpermtrack.com/products/permtrack-for-govee-control-organizer-box
@NakiaFitch 2 ай бұрын
I can’t find the type of wire you use
@jroweinc 2 ай бұрын
Here you go: amzn.to/41fzWHC
@davidv.3908 2 ай бұрын
When splicing, do you have to cut between lights, or can you simply use the supplied connectors and create, essentially, a wire segment between two Govee segments? I’m not having any luck with this approach. I used 18g wire (about 25’) and attached the supplied connectors at each end. When I put this section in between the full Govee sections, the sections on the other side of the new wire does not work correctly. I thought this would be better than actually cutting between the lights, but apparently I’m mistaken.
@jroweinc Ай бұрын
You need to incorporate a govee extension with driver "box" in it for that length extension likely. Also, that is correct....as the lights themselves act as a booster/ driver/ regulator to help cary the signal....there is too much voltage loss otherwise.
@mcg3534 2 ай бұрын
Seems nice we have open eaves so I don't think they'd work for us. Would need to be able to screw to each eave and hope they line up ok with the 24" gaps and somehow shim them to the pitch angle so they don't aim at the wall.
@jroweinc Ай бұрын
Yeah you would need to do some custom work for that application.
@RileyFagerland 2 ай бұрын
What’d you use for the in wall power box?
@jroweinc Ай бұрын
I wasn't pleased with the lack of perfect fit on them. So try this: govpermtrack.com/products/permtrack-for-govee-control-organizer-box
@Banana69999 2 ай бұрын
I agree, for me was getting over my fear of heights. When i had to get on the roof I was slipping and sliding, my friend recommended some foam cushion to step on.
@jroweinc 2 ай бұрын
Awesome, yeah those work great!
@albur 2 ай бұрын
What did you use?
@jroweinc 2 ай бұрын
Www.govpermtrack.com
@shawneanderson1605 2 ай бұрын
I have a small section where the garage meets my front porch where there is no overhang or soffit. If I start with the garage, how do I keep installing the lights until I can get it to the porch?
@jroweinc 2 ай бұрын
If I understand… you would likely need an extension there…
@shawneanderson1605 2 ай бұрын
Thought the same. Can’t find one. They are Eufy brand and I even went to the website. Thanks for the input!
@jroweinc 2 ай бұрын
@ eufy isn’t cutable to my knowledge for extending. Now it probably works but voids warranty 🤷🏼♂️
@PhilFry-gj6xq 2 ай бұрын
Hey Jakob! I just test ran my 200' Pro set per directions with power extender. Is it normal for the main power source to warm up, noticeably above room temp after 20 minutes?
@jroweinc 2 ай бұрын
Power extender ? Power supply…expect the power supply to be warm yes, hot… maybe not 🤷🏼♂️ You could have a bad one. Not 100% on this one.
@PhilFry-gj6xq 2 ай бұрын
@@jroweinc Thanks Brother! Sorry, I should've called it the LED driver that plugs in after string 5 to run the last 7...
@Bman1221 2 ай бұрын
I couldn't agree more with this information! I've been looking for installers in my area, and no one hides the wiring. I've asked for pictures, and every picture shows the extension where they hang freely on the side of the house. If there are any recommended installers in the Riverside, CA, area, please let me know.
@jroweinc 2 ай бұрын
TY, might try Govee Indoor Outdoor lights/ Marketplace on FB