Thank you for this useful video. I was considering a garolla door but I might look elsewhere now.

Just found your brill video, very useful as I’m about to buy my first robot mower. I’m concerned about the position of the RTK transmitter on my property, can you advise; does Luba have to have a clear, unobstructed line of site to the RTK transmitter constantly? Trees are not the problem on my property, I figure if I mount the transmitter on house roof/chimney, lawn at far end of house will be ‘in shadow’ from transmitters line of site. Will mower stop working in this area? Also, do you know if you can join multiple lengths of RTK extension cable together to extend distance from charging station to transmitter? Thanks. Rob

I don’t really hear any negatives. It won’t mulch leaves and sticks. Well of course it won’t. I have some steep inclines that make push mowing very difficult and any self propelled mower that can climb it kills the grass. Plus those machines are bigger and I have no place to store it. This robot thing looks like it exactly what I need. Thanks

Ian are the tracks on ok , it sounds funny and a lot louder than others I have seen online, ps good to see your new channel

Thanks for this video. Very interesting. I have had an Atlas PT ultra installed for 24 hours. So far I would say it is something like 70% effective. It is very good at recording people leaving the house, not so good at recording people arriving. Sometimes the connection seems to drop out. I haven’t tried continuous record yet. Overall I don’t think it replaces an installed, wired system.

Do you know if works with Bosch Smart System Batteries? Tks

Dude this thing is obviously has a noise problem with the motors. Why are you responding to all of the comments saying they are normal, when we've all watched videos where the motors are not nearly that loud?

Dude, is there something wrong with that? It sounds terrible if that's the sound I'm not spending $6000 for that thing.

That bloody fob drives me mad stopping and starting rubbish product

Your mechanic needs to be fired. The mower is more boke than before.

I have a draft in each slat coming from just inside the guide rail. When i move my fingers from the slats towards the guide rail i can feel a draft coming from each one.

They are awful, we have one and had loads of issues Broke in half, motor gone, gets stuck half way up... We contacted them in warranty 4 times and they never replied. Ended up conveniently getting a reply when the warranty had run out and ended up having to pay....since then its gone again. Shocking quality...

Hi ,Great useful video. Can you tell me if it arrived to you with both the high as the low RTK antennas? Did it arrive with the correct 230v, 13A type G plugs.

Everybody talking about the noise; there is nothing wrong, it is exactly how it sounds.

I thought it was supposed to put on a alarm or something

Not that impressive, great potiential

It's just too loud. When in the garden, it's about the last thing I want to hear.

Yarbo has been a great device for me but it is *SO* annoying at how bad this thing is at landing on it's charging dock quickly the first time. I've had indoor robo vac/mops for years and that's the docking speed and precision that I'm used to. The Eufy S1 Pro and 3i S10 Plus are the two that I currently have, both vacuums and mops, and they hit little bitty charge pegs (smaller than a dime) on the first try. My Yarbo misses the charge dock usually on try 1 and 2, then lands kind of in the middle on try 3-4. They need something to improve this. I've changed the charging location probably 7 times. Recalibrated it twice as much, with virtually no improvement. I see others online with similar docking quality. It's simply not good. 20:50 - that's literally horrible. Props to you letting it ram your car. That was great. lol.

The Yarbo has improved since this video with version 3.5.6. it is not as noisy as the video shows. I live in a quiet neighborhood. It has 4 speeds and I mow on slow (2nd speed) and I can only hear it if I am standing still. If I am walking, my footsteps overshadow its sound. I just got my M1 in Jan

Great fun - but if my neighbour had one of these I’d be banging on his door because of the noise 😂. Appreciate you’re probably far from people.

That’s noisy!😂

Your motors sound terrible. How many hours of operation are on this unit?

My antivirus keeps blocking mammotion website as "fake." I haven't visited the site for at least 6 months but it was working back then.

Please look into the Yarbo. It is day and night better than the Luba 2. I’d love to see a video from you about the Yarbo.

Are there uk service centres? What sort of dealer servicing requirements do they need?

I feel like there are other features they could work on that would be far more useful.

If it was quieter, and followed me along like this, It could just about replace my dog hahaha

you saved my day!

Sorry to tell you bluntly but you bought a terrible quality door. The motor will last around 2 years maximum. If you lean on it in the middle it will fall through. Also. Not insulated, a huge gap in the underside of the box at the back. Also no safety reverse function (illegal) You would have been far better off putting some chipboard on hinges, more reliable. Yes i am a door engineer of 15 years and have to rip these out all the time for disappointed clients.

I recently purchased the ND-25LS but the user manual is in German only 😞. Also there is no fan control in this model ...

You really need WI-FI 6 for the cameras to work properly. I had a major learning curve to get my (2) cameras up and running,

issue with the mower go figure they sure dont even make videos to give us any hope

Great authentic review. Was going to get the 10000H, but might be able to get by with a smaller model. Will need to measure my yard to determine actual area of lawn that will be mowed. Thanks for the honest review.

That is such a con job. Sad very sad.

Are they all that noisy? I didn’t remember them being that noisy on the demos. I first seen.

Joke huh? 🤔 it’s not cutting anything and more of a hassle watching and programming it lol

I am wondering after watching your video here on disconnecting and re-connecting the two terminals that control the height adjustment for the Luba 2 Mammotion mower if maybe the problem that Mammotion is having with the failing height adjustment situation could be fixed by improving the connector reliability by using a more reliable connector. These connectors and the pins are very small and delicate and it seems like over time they no longer maintain a reliable connection. I have been having the same problem as you have experienced and I finally took the top cover off of my Luba and did exactly the same thing as you did by unplugging and plugging back the two connectors. After doing that the robot worked again. I am going to try and apply Stabilant 22 to the connector terminals in an attempt to make the electrical connection more reliable and thereby hopefully solve the height adjustment failure problem permenantly. Stabiliant 22 is a very good electrical contact enhancer and I am hoping that it will solve our problem. Keep us posted on how things work out for you. Other than this problem I personally have been very happy with my Luba 2 Mammotion. I have been using it since May of 2024 and it is really impressive. I hope that we can get this problem reslolved permanently so we can enjoy our wonderful little robot mower!

stop wasting time, money, resouce ...

This thing is a bit joke. Looks cool tho

You are awesome. Thx so much

Is that supposed to be mowing? It's not even able to cut up the leaves on the lawn. I think you got taken for a lot of money.... Sorry Mate

I am right in thinking this is the transform ? The single skinned base model? I’m looking at the transform pro, apparently it’s twin skinned with foam between the two layers of plastic.

so did you fix it? or did i miss that part of the video?

So Mammotion said to open it up and fix it yourself?

very noisy

OMFG that is so retarded

why does it sound like 8 goats screaming? there might be something wrong with the track motors? other videos i watched weren't this loud.

OMG! That is loud. How can you mow at night with this? I have waited almost 6 months for this and if mine is that loud I will probable send it back.

I'd like it to have a back-track feature where it remembers the path it just took and can go back along it autonomously.

Watch out Mr Rogers is sniffing heavy & right behind you !