Пікірлер
@OnlyTakeW
@OnlyTakeW 12 сағат бұрын
Is it possible to have a setup with two hailong batteries as well as the rad battery ?
@ElectricAllWheel
@ElectricAllWheel 5 сағат бұрын
Yes. You can use two balancers or we have the DX4 electricallwheel.com/products/datex2-dx4-30a-continuous-45a-max-4x-input-dual-4x-output-battery-balancer
@bathtubrefinishingcoatings
@bathtubrefinishingcoatings Күн бұрын
Can you provide a link for the battery in the video or one that is compatible with this kit? Thank you !
@ElectricAllWheel
@ElectricAllWheel Күн бұрын
It is the 48V 10Ah from this list electricallwheel.com/pages/recommended-batteries-to-use-the-electricallwheel-dual-battery-kits
@DorkyDeliveries
@DorkyDeliveries Күн бұрын
Will this work with the Aventure 2?
@ElectricAllWheel
@ElectricAllWheel Күн бұрын
Aventon | Aventure V2 | Dual Factory Aventon Batteries installing two batteries with DateX2 Dx2 Kit kzbin.info/www/bejne/aJTWfKivlq-qsMU
@DorkyDeliveries
@DorkyDeliveries Күн бұрын
@@ElectricAllWheel Will the battery indicator on the Aventure2 still have an accurate read out of both the batteries as you use them?
@ElectricAllWheel
@ElectricAllWheel Күн бұрын
@ if you charge both batteries to full capacity before use it will
@georose33
@georose33 Күн бұрын
I just installed Hellbender70 headset in place of a NECO on my Ecells 5 star. Why wasn't the lower cup, bearing and crown race replaced? Very curious.
@ElectricAllWheel
@ElectricAllWheel Күн бұрын
This was the Wired update package sent for the wobble. Just the hellbender
@RunBikeMike
@RunBikeMike Күн бұрын
Very cool
@craigpage1261
@craigpage1261 2 күн бұрын
I just ordered 2 of the kits, 8 of the strap mounts, and a thumb drive kit. Looking forward to installing all of it. I’ll order some of those cool brown wall tires in the near future. I’d feel guilty replacing good tires too soon. 😂.
@larryreyes6518
@larryreyes6518 2 күн бұрын
What is the number of tooth and lenght of the Gates Carbon Drtive Belt ?
@ElectricAllWheel
@ElectricAllWheel 2 күн бұрын
Carbon drive Chainring is 36T. Unsure about belt length
@thetds101
@thetds101 2 күн бұрын
Great setup video... I do have a question though. Do you know of a video showing how to change or upgrade the rear tire? It's not as straightforward as a chain drive...
@carrierejvicto2917
@carrierejvicto2917 4 күн бұрын
Second batry name?
@richardcz1954
@richardcz1954 4 күн бұрын
I unboxed my Lectric XPEAK Step Through about three weeks ago, The only Post Buyers remorse “ I HAD” was the wobble that has been consistently reported on reviews I even contacted technical support about the problem and they told me not to put a basket on the back rack to use Pannier bags, this isn’t a very good fix after watching countless KZbin videos there is one content provider that has solved this issue on the STEP OVER MODEL X PEAK, he replaced the Bike Head set with a Cane Creek Hellbender 70 -ZS56/-40 -ZS44/28.6 Complete Black=BAA1186K $119.00 I’m hoping this will fix the wobble in my Step through Model XP, Being a Machinist by trade this fix makes perfect sense that if it will work in the step over it will also work to fix this issue in the Step Through, Lectric should research this fix and address this problem with this fix if it proves out. You should be able to use the Cargo rack,
@davidwollmer8694
@davidwollmer8694 4 күн бұрын
Great video. How is the motor noise on the 750? I heard it was a little loud
@davidfranklin2728
@davidfranklin2728 5 күн бұрын
Don’t get me wrong, love your videos, but you should redo this so you can actually see the display , the whole point of the video
@ElectricAllWheel
@ElectricAllWheel 4 күн бұрын
Time and capture. We will do better. I will put up some shorts for the settings view
@XtremeDSLR
@XtremeDSLR 5 күн бұрын
For the handgrips I just spray windex or any glass cleaner on the bars. Slides on then very easy. Do the same to take them off. Take a screwdriver and slide it under the grip and spray the inside and they come off very easy
@ElectricAllWheel
@ElectricAllWheel 5 күн бұрын
Any effect on the grips for use afterwards? Do they still grip?
@XtremeDSLR
@XtremeDSLR 5 күн бұрын
@ElectricAllWheel it makes them come off and stick on better once dry. Give it a shot, let me know what you think.
@FubarMike
@FubarMike 5 күн бұрын
Can you still use class 2 settings with this display? Also hopefully you can figure out how to enable full throttle on any PAS setting. That would be amazing. That would make it the perfect bike.
@nican3213
@nican3213 5 күн бұрын
do u have a link for the amazon
@ElectricAllWheel
@ElectricAllWheel 5 күн бұрын
Hello. It should be at the top of the list in the video description
@nican3213
@nican3213 5 күн бұрын
hello sir can i use it display on lectric xp lite 1.0
@craigpage1261
@craigpage1261 5 күн бұрын
Very cool.
@rkbet
@rkbet 5 күн бұрын
I have this display and no instructions lol
@robertcurtis3807
@robertcurtis3807 5 күн бұрын
Folding makes no since, unless it’s very light!
@calvinwu9298
@calvinwu9298 6 күн бұрын
would love to see how you add a 2nd battery to the Fold 1. Thanks for the content!
@ElectricAllWheel
@ElectricAllWheel 6 күн бұрын
With the controller potted into the mounting plate of the battery, it will be difficult to do.
@calvinwu9298
@calvinwu9298 3 күн бұрын
@@ElectricAllWheel yeah seems like Velotric is making everything proprietary on the bike making it extremely difficult to modify.. from the charger, the foot pegs, the front basket, headlight, and the controller... hopefully you find a way to do it :)
@craigpage1261
@craigpage1261 6 күн бұрын
Very cool.
@ecuaflakos
@ecuaflakos 6 күн бұрын
Thats nice 😇👍🏽awesome content. So theres this display screen that works flawlessly on lectric xp 3.0 just like the ones that the lectric one and lectric lite 2.0 has.
@ElectricAllWheel
@ElectricAllWheel 5 күн бұрын
Lectric | XP3.0 ST | Install & Test Ride Plug & Play Amazon Aftermarket Color M7C-2 e-Bike Display kzbin.info/www/bejne/j4elcmd3qJ5nh7c
@badcat4272
@badcat4272 8 күн бұрын
Major problem you're killing the step through
@stringer5385
@stringer5385 8 күн бұрын
Nice bike, high step through, not easy to mount with shock mount in the way.
@craigpage1261
@craigpage1261 8 күн бұрын
I need to get my bikes down to Tampa for a ride. I have several friends that live in the area.
@TheQuizMall
@TheQuizMall 8 күн бұрын
Can we do it for Xpress 500 too...?
@ElectricAllWheel
@ElectricAllWheel 8 күн бұрын
Exact same install.
@craigpage1261
@craigpage1261 9 күн бұрын
Am I the only one that actually likes plastic fenders? I don’t get why everyone wants metal ones that are heavy and can be bent up. I guess the metal one do look better.
@ElectricAllWheel
@ElectricAllWheel 9 күн бұрын
With plastic, there are the good ones, and the really bad ones. I think the metal looks better too, but there are practical limits to that as well
@robertcurtis3807
@robertcurtis3807 9 күн бұрын
I love those handlebars, and the BMX style ones too.
@tomlauritzen9522
@tomlauritzen9522 9 күн бұрын
Love my 2024 Freedom. I've adjusted the power levels to slow it down making trail riding much better. I live on top of a hill with steep approaches in every direction... it pulls every hill with ease. It's totally adjustable making it perfect for anyone.
@ChrisCrossed
@ChrisCrossed 9 күн бұрын
Solid ride for the money
@ElectricAllWheel
@ElectricAllWheel 9 күн бұрын
We thought so too
@donquixote3384
@donquixote3384 9 күн бұрын
Thank you for your prompt response. One last question: What about the controller's current limit Amps and the battery discharge current Amps? Do I need to stay within the controller max current limit amps when I choose the battery discharge current Amps? Or does it not really matter?
@ElectricAllWheel
@ElectricAllWheel 9 күн бұрын
Amp hours (Ah) of a battery are not the current limit. They are the size of the tank. The BMS of the battery should typically always have a higher max current rating that the controller of the e-bike
@donquixote3384
@donquixote3384 9 күн бұрын
Essentially, the battery (BMS) designed to handle high discharge currents will ensure that the E-bike controller operates safely without any risk of damage. I genuinely appreciate your effort in clarifying this topic; your insights have been incredibly helpful in enhancing my understanding. Thank you!
@whitefeatherslinger8194
@whitefeatherslinger8194 10 күн бұрын
My colours are different on the controller ant ideas pretty much the same as yours even down to the grips
@donquixote3384
@donquixote3384 11 күн бұрын
Would it be a problem if the 2nd battery Ah capacity value is higher than the prime battery installed by the factory?
@ElectricAllWheel
@ElectricAllWheel 11 күн бұрын
It would be just fine. Match your voltage and you can combine any amp hour you want.
@donquixote3384
@donquixote3384 10 күн бұрын
@@ElectricAllWheel Thank you for your prompt response. One last question: What about the controller's current limit Amps and the battery discharge current Amps? Do I need to stay within the controller max current limit amps when I choose the battery discharge current Amps? Or does it not really matter?
@NM-nh8tu
@NM-nh8tu 11 күн бұрын
cant wait for the review and the DateX2 install 😊
@BrettWoodBiking
@BrettWoodBiking 12 күн бұрын
That's cool and satisfies the government and state entities but, how much does it hurt the purchasers pocket? I mean, I got to be paying at least triple price for that little sticker thanks to the karens. The only shock I'm really worried about is sticker shock . If the company can't absorb the cost I won't be a customer. One commenter probably represents at least 90k people that don't bother to say anything. Something to think about for these companies
@bradleycallison
@bradleycallison 10 күн бұрын
its a cheap bike 1200
@BrettWoodBiking
@BrettWoodBiking 10 күн бұрын
@@bradleycallison yeah but for that same price I could get get a hardtail frame, 3k watt motor with a far driver controller and 72 volt battery.
@tuan-vu...YouTube
@tuan-vu...YouTube 12 күн бұрын
I have a Hyperscorpion. I want to add another battery Juiced G2 19.2AH , together with the original Juiced 19.2Ah battery. With the kit you are selling, will the two 19.2Ah work as just plug and play? Or will it fry the motor controller ?
@ElectricAllWheel
@ElectricAllWheel 12 күн бұрын
You should be able to combine the two batteries. Will will need the mounting plate or connection to XT60. Voltage is what is import. Amp hours are just the size of the tank. -Matt
@tuan-vu...YouTube
@tuan-vu...YouTube 11 күн бұрын
@@ElectricAllWheel - Thank You for your reply. Your kit include the two 14 gauge XT60 connectors, is the gauge good enough to carry the load in my situation? Or should I go with the thicker 12 gauge XT60 connectors?
@kevo60420
@kevo60420 13 күн бұрын
Great video. Just what I needed to watch. I got the same tires in and this video will make them easier to install.
@bmwood1010
@bmwood1010 13 күн бұрын
The battery you used in this video is no longer available on amazon, following the link you provided. Could you provide a link to a different product or vendor that would work with this setup?
@The.Real.Timmii
@The.Real.Timmii 13 күн бұрын
big battery, big motor, that's why people buy bikes like this
@jamesstrength5405
@jamesstrength5405 13 күн бұрын
Yeah. The music is freaking annoying.
@ericberg7364
@ericberg7364 13 күн бұрын
Just drove down and picked up 2 WIRED FREEDOM PLUS ebikes today they gave me 2 HEADSET BEARINGS. I will be installing them in the morning. Thank you for a great video
@sledhead904
@sledhead904 14 күн бұрын
Hmm, you can remove the derailer guard? I never even had one on my bike. Early June delivery
@sledhead904
@sledhead904 14 күн бұрын
Also flip the bike over. It's way easier with the drop outs
@AiydMoraih
@AiydMoraih 14 күн бұрын
Ih❤
@ChrisCrossed
@ChrisCrossed 14 күн бұрын
Is there any ghost pedal with that belt drive at top speed?
@alexprimo5247
@alexprimo5247 14 күн бұрын
Yes there is. At PAS 2 I can still achieve some pedal pressure, but once it hits about 16-17 mph (PAS 3+) there is ghost pedaling.
@ElectricAllWheel
@ElectricAllWheel 14 күн бұрын
Yessir. That or I’m getting too old to move, lol
@marcosespindola941
@marcosespindola941 15 күн бұрын
if a second battery is added. does the balancer charge both batteries with the oem charger?
@ElectricAllWheel
@ElectricAllWheel 14 күн бұрын
You will need to independently charge your batteries
@Eric_Tennant
@Eric_Tennant 15 күн бұрын
Best to plug the charger into the wall before the bike. ~Long live the solar tour.
@ElectricAllWheel
@ElectricAllWheel 14 күн бұрын
Lectric manual indicates the plug in order is as in the video.
@Eric_Tennant
@Eric_Tennant 14 күн бұрын
@@ElectricAllWheel Very odd.
@ElectricAllWheel
@ElectricAllWheel 14 күн бұрын
@Eric_Tennant general industry standard
@Eric_Tennant
@Eric_Tennant 14 күн бұрын
@@ElectricAllWheel Wall first will prevent sparking.
@ElectricAllWheel
@ElectricAllWheel 14 күн бұрын
@@Eric_Tennant we would advise that you research multiple sources to confirm your intuition.
@spikelove9533
@spikelove9533 16 күн бұрын
I've been looking at that bike it will be my first e bike. Thanks for.the tire tip and the good bad and ugly review.
@JTooSwiftYT
@JTooSwiftYT 16 күн бұрын
Hello sir, i have this exact bike with a 48v 14.4ah battery would i be able to run a 52v 20ah battery in serious or no due to the difference in ah
@ElectricAllWheel
@ElectricAllWheel 16 күн бұрын
The amp hours are the size of the tank. The spec that’s important is the voltage matching voltage specs is important but 52V on a 48V system has been proven to work
@JTooSwiftYT
@JTooSwiftYT 16 күн бұрын
ok thanks @@ElectricAllWheel
@trubanks4634
@trubanks4634 17 күн бұрын
Hey buddy it’s Wes here keep up the good work
@Kay-xs6yk
@Kay-xs6yk 16 күн бұрын
It looks a little smaller
@MarkPesell
@MarkPesell 17 күн бұрын
AN $8 TIRE SOLD ON ALIBABA AND REBRANDED HEB. HEB IS A TINY BIKE SHOP A FEW MILES FROM ME
@ElectricAllWheel
@ElectricAllWheel 17 күн бұрын
First statement is false. The second statement doesn’t matter. Thanks for watching
@MarkPesell
@MarkPesell 17 күн бұрын
@@ElectricAllWheel FIIIIIIIIIIRST STATMENT IIIIS TRUE.INBULK. SO WHATEVER
@MarkPesell
@MarkPesell 17 күн бұрын
BLACKCAT TIRES. HAVE A NICE DAY