@@alexandrtinkovan116 My AR Pro with 5000 mah 4S lipo and GoPro weighs 1.6kg.

@@bluefish3607 hey, thanks for your reply. Can I get your dump to see the configuration? I got some recommendations and from my dvr and take off videos it looks like “torque roll”

Hi the DJI O3 camera records its footage simultaneously to the air unit in 4K and also to the Goggles SD Card. I use Inav on my flight controllers which provides a programmable on screen display which is recorded by the goggles and I see this while flying.

@@richardsmith5689 Iron on Oracover, in my latest build I used vinyl wrap which is a bit heavier. Both work well.

@@RedAppleApe I bond an M3 plastic stand off into the foam and use a thumbscrew to hold the front of the cover down.

@@bluefish3607 thanks mate, I now designed a small mount to heat in a brass thread and rised the small angle thing.

@@RedAppleApe Yeah those brass inserts are really good.

cerca il ferro sigillante su Ebay www.ebay.co.uk/itm/165168731032?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2RbBY9arR_C&sssrc=2047675&ssuid=4Ttt53SvQmm&widget_ver=artemis&media=COPY

A local sign company cuts them for me. Here are the files if you want to get some done. drive.google.com/drive/folders/19BGFhioTRlv1I6qybjz7fsurukartZMH?usp=sharing

@@gregorydobson4307 Its Flourescent Blue Greg. Yes I got the decals cut at a local sign company. I can upload the files and send you a link if you want to get some done.

@@bluefish3607 Thank you, great if you could send a link.

@@gregorydobson4307 Sorry for the delay Greg drive.google.com/drive/folders/19BGFhioTRlv1I6qybjz7fsurukartZMH?usp=drive_link

Thank you glenn😊

Purely a matter of choice and your budeget I guess. DJI O3 is great because you can record in 4K and not need to use a GoPro and fit larger batteries for extended flight times. That said I also use the original Air Units with my Goggles 2 and that is also great resolution for flying but the firmware to use with Goggles 2 disables the air unit recording, Goggles only. I don't think that applies to to the V2's tho. Any HD system tbh is amazing.

@@bluefish3607 thank you sir! Also, did you laminate with clear and then laminate color on top of that? I'm debating on buying another ar wing pro pnp on Banggood to have a spare. It's only $53 shipped right now.

We all have to die someday so it may as well be when your doing something you love, right. 😀

The AR Wing Pro is a very good plane for long range. It has a large battery carrying capacity and with a hi capacity LION well over an hour of flight time should be possible. I do not personally fly mine long range and just have fun flying proximity no more than 2 km away generally.

thank you so much 👍🏻 will get one asap 🫣

I hope you have as much fun with the AR Pro as I have had, great wing.

I really enjoyed it as a trainer plane to learn LOS, I gave it to a friend and have now moved on to a Maxthrust Riot V2 and an FMS Fuyura 64mm EDF Jet

211 mph wow thats really awesome speed, mind you that plane does look like it was designed to go fast! I have been mainly flying LOS recently, although not much of that until the last month or so as the weather has been really terrible in my part of the UK. I am toying with the idea of adding inav and FPV to an edf jet and also hope to get some flights with the T1 this weekend when I take a trip in the camper to North Wales with my son.

@@bluefish3607 yeh flying around wales would be good. I’ve not really done any flying the last couple of weeks really. Still waiting on my atomrc dolphin frame to be delivered. Another new model 🙈😂 2300kv cobra motor to fit, so should go not to bad. Dolphins are not speed wings, but should be a fair bit quicker then the standard. And yeh, the alpha stike is kinda like a dart in the wind

Wear a crash helmet if your nervous 😂

I am sure you will be impressed by the image quality. DJI took FPV to a new level for me.

Just put the switch inline on the 9v line between the FC and O3. Ran the positive from the switch also to the LED and negative for LED from FC.

Bluefish can you show a close up pic or diagram. Just to see if i know what you’re talking about. You cut the red wire on the harness from FC to the air unit and connected it to the switch? I dont understand the negative to LED. I dont have LEDs hooked up on my plane yet.

Hi the LED board is a Heewing product and comes with the Pro version of the T1. You can buy it as an accessory on their website. www.heewing.com/products/heewing-t1-ranger-f01-rgb-full-color-driver-plate

Thank you

Also how did you wire up the isolation switch? I would like to do that to mine also. Thanks

Cheers Silvio, I hope you are well.

Hi sorry for the late reply I have been away in Spain. I use the same Molicel P45’s in my packs and they are great in the T1. I assume you connected the O3 to an FC UART and set it up in jnav ports it needs this to work. I believe there is also a setting in the DJI goggles menu to disable the need to arm to get full power on the O3. Enjoy your T1 is really in an outstanding FOV plane imo.

Yes about 3-5mm I find is required on the AR Pro.

Splice the negative from the receiver to the negative on the servo and use connector for 5v Chan 1 and 2

Had a few crashes but never stripped a servo yet. I put PDK servos in my latest AR Pro build and they look pretty bullet proof and work great. I guess those servos you have should be called Partial Metal Gear Servos 😀 Happy Flying

Hi there, thats a question that has so much information required to answer. I think an AR Pro or ZOHD Dart XL would be good options to get started. This Facebook group will give you lots of ideas and you can ask questions, best to do your own research, its more fun that way. facebook.com/groups/704242724977479 BNest wishes for your future flying adventures.

I would go O3 as it will give you a much better experience. Whilst O3 does not have a perfect OSD it is more than adequate. See my latest Heewing T1 Ranger video to see how my O3 OSD looks. Best wishes for the build and maiden.

No, it has definitely not been sorted out. I'm about to return my O3 unit to Amazon.

Glad you like it. I am building another one as I love this wing so much.

Hi, here is a link to all my T1 designs. drive.google.com/drive/folders/1Jeyqc3z2eswAgiuhwKtT5BVXrLnCiTSo?usp=sharing

@@bluefish3607 thanks!!

Thank you a lot! Cheers from Canada!

Hi I got mine from Amazon here is the link: www.amazon.co.uk/dp/B0BMV4ZVBR?psc=1&ref=ppx_yo2ov_dt_b_product_details

Cheers, I am loving every minute of it 👍

Hi Roy I away from home at the moment but will answer you later when I have access to my computer.

Hi Roy, with regard to my setup I would not advise using that as a starting point because my Wing is going to be different in all sorts of ways to yours most likely. You will get far better results if you use the stock inav 7.0 settings and then perform an autotune, autotrim and autolevel once you get in the air. I use the continuously trim servo option in the config tab switched on so I don't actually have autotrim as an option but it is entirely your choice. In terms of Autolaunch my AR is quite heavy at 1.65 kg so I use a 1400 idle launch throttle and 1950 launch throttle. In terms of the elevon setup I have about 3-4 mm of up elevator at 1500 neutral position in inav but a stock plane would be slighly less say 2mm should be fine. In terms of max throws I would aim for 10-12mm for a stock plane. Here is a link to a video made by my friend and inav guru Marc Hoffman. Although its not based upon the current version of inav, the principles still remain. kzbin.info/www/bejne/rJXLmGhql9ice68si=ZmrkvnEc4dnGm6Ci I hope that helps Roy, good luck with the maiden and enjoy your AR Pro.

Hey thanks, looking forward to more adventures with the T1 Ranger.

Yeah, it's faster than I expected to be honest, but so quiet compared to the AR Pro.